|
User manual for Dangerous Music Liaison Signal Routing Matrix LIAISON
- Manufacturer: Dangerous Music
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Analog Recording Mixers
- Safety instructions
- Startup and operation of the analog recording mixers
- Tips for setting up your Dangerous Music
- Settings and expert assistance
- Contact Dangerous Music service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Dangerous Music Liaison Signal Routing Matrix LIAISON,
which address similar problems with connecting and setting up Analog Recording Mixers Dangerous Music.
|
User manual for the Dangerous Music Liaison Signal Routing Matrix LIAISON
The user manual for the Dangerous Music Liaison Signal Routing Matrix LIAISON provides
necessary instructions for the proper use of the product Pro Audio - Recording - Analog Recording Mixers.
The Dangerous Music Liaison Signal Routing Matrix is a 2U rack mountable routing matrix designed by mastering engineers to connect up to six pieces of outboard equipment directly to your system. Additional pieces of equipment can be added to the signal path by daisy chaining, utilizing a patch bay, or integrating with a Dangerous Master unit.
The unit features balanced left and right XLR input and output pairs for six routing insert sends/returns and two busses, A and B. A 25-pin D-sub connector provides interfacing to two stereo pairs of external outputs for monitoring the Busses. In standalone mode you can monitor Buss A input for a preprocessing mix and Buss B output as a post processing mix. A switchable 120/240VAC outlet provides power to the unit.
The device's control interface enables you to instantaneously insert your outboard gear into the signal chain on either Buss A or Buss B with the push of a button. Deselecting the button bypasses the external gear on that insert from the signal chain. You can reverse the order of outboard equipment on each pair of sends by pressing the flip 1-2, flip 3-4, or flip 5-6 insert buttons. All of your configurations can be stored, recalled, and cleared as presets by utilizing the four preset buttons and clear and store buttons on the front panel of the device.
The unit includes a parallel processing buss on inserts 2, 4, and 6. Pressing any of the three parallel processing loop buttons blends the original unprocessed signal with the processed insert signal. A continuously variable potentiometer knob allows you to control the blend of unprocessed and parallel processing. A polarity button allows you to flip the signal of the parallel processing buss 180° out of phase. The device is hand-built in the USA to mastering standards.
|
If you own a Dangerous Music analog recording mixers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Dangerous Music Liaison Signal Routing Matrix LIAISON in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Dangerous Music Liaison Signal Routing Matrix LIAISON:
| Frequency Response | Passive section: +0, -0.1 dB from 10 to 100,000 Hz
Active section: +0, -0.1 dB from 10 to 100,000 Hz | | Maximum Level | > +28 dBu | | Noise Floor | < -94.5 dBu from 22 to 22,000 Hz bandwidth | | THD + Noise | < 0.002% | | IMD | < 0.003% | | Crosstalk Rejection Typically @ 1 kHz | Passive section: > 124 dB
Active Section: > 113 dB | | Input Impedance | 20 kΩ | | Output Impedance | 20 Ω | | Fuses | USA: 500 mA fast blow for 120 V
Europe: 250 mA fast blow for 240 V | | Rack Size | 2U | | Dimensions (H x W x D) | 1.75 x 19 x 12" (4.45 x 48.3 x 30.5 cm) | | Weight | 12.5 lb (5.67 kg) | |
The user manual for the Dangerous Music Liaison Signal Routing Matrix LIAISON can be downloaded in .pdf
format if it did not come with your new analog recording mixers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Dangerous Music users keep a unique electronic library
for Dangerous Music analog recording mixerss,
where you can use our link to download the user manual for the Dangerous Music Liaison Signal Routing Matrix LIAISON.
The user manual lists all of the functions of the Dangerous Music Liaison Signal Routing Matrix LIAISON,
all the basic and advanced features and tells you how to use the analog recording mixers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Dangerous Music service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Dangerous Music Liaison Signal Routing Matrix LIAISON. User manuals are also
available on the Dangerous Music website under Pro Audio - Recording - Analog Recording Mixers.
Question and answer discussion forum concerning user instructions and resolving problems with the Dangerous Music Liaison Signal Routing Matrix LIAISON - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Dangerous Music Liaison Signal Routing Matrix LIAISON
|
|
|
|
|
