DJI User manual

Instruction manual - DJI

DJI Transmitter for Inspire 1 Quadcopter (Black) CP.BX.000137 The black DJI Transmitter for Inspire 1 Quadcopter is the handheld radio controller used to operate the aircraft as well as control the gimbal. You can even use two transmitters with one aircraft, thereby allowing one person to pi... DJI TB47 Intelligent Flight Battery for Inspire 1 CP.BX.000136 The black 99.9Wh TB47 Intelligent Flight Battery for Inspire 1 from DJI is a 6S LiPo battery with a capacity of 4500mAh that is designed specifically for use in the DJI Inspire 1 Quadcopter. The battery features smart circuitry s... DJI TB48 Intelligent Flight Battery for Inspire 1 CP.BX.000135 The black 129.96Wh TB48 Intelligent Flight Battery for Inspire 1 from DJI is a 6S LiPo battery with a capacity of 5700mAh that is designed specifically for use in the DJI Inspire 1 Quadcopter. The battery features smart circuitry... DJI Inspire 1 PRO Black Edition Quadcopter CP.BX.000115.02 A Micro Four Thirds CMOS sensor with 4K image capture is introduced to DJI's quadcopter line with the Inspire 1 PRO Black Edition featuring the Zenmuse X5 camera and gimbal system along with a 15mm f/1.7 lens. Forgoing the fixed ... DJI Motor Gear for Focus (MOD 0.8) CP.ZM.000300 The Motor Gear for Focus from DJI features a 0.8 MOD (cine) pitch, making it suitable for lenses or gear rings that adhere to this standard.... DJI Extendable Motor Quick-Release Mount for Focus CP.ZM.000299 The Motor Quick-Release Mount allows you to mount the motor for the DJI Focus on a tripod or gimbal – such as the Ronin/Ronin-M – instead of using rail mounts. It is able to extend up to 1.6".... DJI Suitcase for Inspire 1 (No Foam) CP.BX.000081 The Suitcase for Inspire 1 from DJI accommodates the Inspire 1 in "travel mode" along with standard accessories. It is constructed from water-resistant ABS plastic. The case will fit all Inspire 1 models, including the Inspire 1 R... DJI 1345s Quick-Release Props for Inspire 1 (Pair) CP.BX.000035 The DJI 1345s Quick-Release Props for Inspire 1 is a two-pack that features one clockwise (CW) and one counterclockwise (CCW) prop. It works with any Inspire 1 model that has the 1345s quick-release adapter installed. Featuring qu... DJI Arm Extender for Ronin CP.ZM.000282 The Arm Extender provides 2" additional clearance on both ends (4" total) for larger camera setup when using the DJI Ronin. Note: For Ronin only. Not compatible with Ronin-M.... DJI Motor Quick-Release Mount for Focus CP.ZM.000298 The Motor Quick-Release Mount allows you to mount the motor for the DJI Focus on a tripod or gimbal – such as the Ronin/Ronin-M – instead of using rail mounts.... DJI Neck Strap for Focus CP.ZM.000296 The Neck Strap for Focus from DJI provides a convenient way to carry the Focus controller. It works over the shoulder or around your neck.... DJI Lens Gear Ring for Focus (3.5") CP.ZM.000295 This Lens Gear Ring from DJI is for lenses that have a focus ring diameter of approximately 3.5". With a pitch of 0.8 MOD (cine pitch), it is compatible with the DJI Focus wireless follow focus system as well as third party equipm... DJI Lens Gear Ring for Focus (3.1") CP.ZM.000294 This Lens Gear Ring from DJI is for lenses that have a focus ring diameter of approximately 3.1". With a pitch of 0.8 MOD (cine pitch), it is compatible with the DJI Focus wireless follow focus system as well as third party equipm... DJI Lens Gear Ring for Focus (2.8") CP.ZM.000293 This Lens Gear Ring from DJI is for lenses that have a focus ring diameter of approximately 2.8". With a pitch of 0.8 MOD (cine pitch), it is compatible with the DJI Focus wireless follow focus system as well as third party equipm... DJI Lens Gear Ring for Focus (2.4") CP.ZM.000292 This Lens Gear Ring from DJI is for lenses that have a focus ring diameter of approximately 2.4". With a pitch of 0.8 MOD (cine pitch), it is compatible with the DJI Focus wireless follow focus system as well as third party equipm... DJI Data Cable for Focus (6.6') CP.ZM.000290 The 6.6' Data Cable connects the DJI Focus remote controller to the motor. It is used in "cable mode" or for firmware updates.... DJI Motor Power Cable for Focus (29.5") CP.ZM.000289 The Motor Power Cable for Focus from DJI allows you to power the Focus' servo motor using a 9 to 16V D-tap power source, such as a professional video battery system. This version of the cable is 29.5".... DJI Motor Power Cable for Focus (15.7") CP.ZM.000288 The Motor Power Cable for Focus from DJI allows you to power the Focus' servo motor using a 9 to 16V D-tap power source, such as a professional video battery system. This version of the cable is 15.7".... DJI 2.4G Antenna for Focus (2-Pack) CP.ZM.000287 This 2-pack of 2.4G Antennas attaches to the remote controller for the DJI Focus wireless follow focus system. The antenna serve to amplify the radio signal for a stronger connection.... DJI Remote Controller CAN-Bus Cable for Focus CP.ZM.000286 This CAN-Bus Cable from DJI allows you to link the Focus remote controller with the Inspire 1 remote controller (transmitter), thereby enabling operation of the Zenmuse X5 camera using the Focus remote....