|
User manual for EnGenius EnStation2 Long-Range Wireless 2.4 GHz N-ENSTATION2KIT
- Manufacturer: EnGenius
- Basic description and contents of package
- Product classification: Computers & Solutions - Networking - Wireless Access Points
- Safety instructions
- Startup and operation of the wireless access points
- Tips for setting up your EnGenius
- Settings and expert assistance
- Contact EnGenius service
- Troubleshooting
- Warranty information
- Price: 130 USD
Click to enlarge image
|
We recommend checking out our discussion threads on the EnGenius EnStation2 Long-Range Wireless 2.4 GHz N-ENSTATION2KIT,
which address similar problems with connecting and setting up Wireless Access Points EnGenius.
|
User manual for the EnGenius EnStation2 Long-Range Wireless 2.4 GHz N-ENSTATION2KIT
The user manual for the EnGenius EnStation2 Long-Range Wireless 2.4 GHz N-ENSTATION2KIT provides
necessary instructions for the proper use of the product Computers & Solutions - Networking - Wireless Access Points.
With a data transfer rate of up to 300 Mbps and IP55 rated waterproof housing, the EnStation2 Long-Range Wireless 2.4 GHz Outdoor AP/Bridge from EnGenius makes it easy to transmit your wireless data signal outdoors over long distances. This item is a manufacturer's kit that contains two EnStation2 units.
The internal 13 dBi dual polarization directional high-gain antenna features narrow beam functionality to direct the signal to its intended recipient for a stronger, more reliable signal. The signal emitted from this AP/bridge is IEEE 802.11b/g/n compliant ensuring broad compatibility with nearly any Wi-Fi enable device. Installation has also been simplified as the EnStation2 comes equipped with 24 V proprietary PoE support eliminating the need for a power adapter.
|
If you own a EnGenius wireless access points and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the EnGenius EnStation2 Long-Range Wireless 2.4 GHz N-ENSTATION2KIT in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the EnGenius EnStation2 Long-Range Wireless 2.4 GHz N-ENSTATION2KIT:
Frequency Range | 2.4 GHz | Standard | IEEE 802.11b/g/n | Radio 1 | 11b/g/n: 2.412~2.484 GHz | Data Rate | Up to 300 Mbps in 2.4 GHz | Memory | 128 MB | Flash Memory | 16 MB | Transmit Power | Up to 26 dBm Up to 400 mW Radio Chains/Spatial Streams - 3x3:3 | Supported Radio Technologies | 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11n: Orthological Frequency-Division Multiplexing (OFDM) 802.11n: With 5/10/20/40 MHz Channel Width | Supported Modulation Types | 802.11b: BPSK QPSK, CCK 802.11n: BPSK, QPSK, 16-QAM, 64-QAM | Supported Data Rates | 802.11b: 1, 2, 5.5, 11 802.11g: 6, 9, 12, 18, 36, 48, 54 802.11n: 6.5~300 (MCS0 to MCS15) | Physical Interfaces | 2 x 10/100 BASE-T Ethernet ports 1 x Port supports 24 V proprietary PoE input 1 x Port supports extension of an Internet signal Reset button LED signal Power LAN 1 LAN 2 WLAN | Antenna | 1 x Internal high-gain directional antenna 13 dBi GHz antenna Azimuth Beam Width (Horizontal): 18° Elevation Beam Width (Vertical): 30° Point-to-Point Transmission for Long Range Distances 2.4 GHz (point 1) Peak Antenna Gain: 13 dBi Polarization: Linear Horizontal Beam Width: 67° Elevation Beam-Width: 33° VSWR: 1:2.0 2.4 GHz (point 2) Peak Antenna Gain: 13 dBi Polarization: Linear Horizontal Beam Width: 61° Elevation Beam-Width: 35° VSWR: 1:2.0 | Power Requirements | Power Source (PoE Injector): 24V/.6A proprietary compliant source Active Ethernet (Power over Ethernet, PoE) Power Consumption: 7.2 W Peak Power Consumption: Up to 34 W | Auto Channel Selection | Settings varies by regulatory domains | Operation Modes | Access Point, Client Bridge, WDS Bridge | LAN | IP (check validity and DHCP server IP range) MAC | SSID | BSSID Supports four SSIDs | IEEE 802.1Q VLAN Tagging | Independent VLAN settings cab be enabled/disabled Any packet that enters the device without a VLAN tag will have a VLAN tag inserted via a PVID (Ethernet Port VID) VLAN Pass-through VLAN Pass-through over WDS Bridge | SNMP | V1/v2c/v3 support | MIB | MIB I/II and Private MIB | QoS | Compliant with IEEE 802.11e standard | Other Management | Save Configurations as default Saves the customized configuration as the default value for different customer demands Client Traffic Status Reports various information in a timely manner as required by the administrator | Control Features | RADIUS Accounting Helps operators to offload 3G to Wi-Fi seamlessly Settings vary by Regulatory Domains Distance Control (Ack Timeout) Multicast Supported Wi-Fi Scheduler Sets the Schedule for rebooting the device | Security | WEP Encryption: 64/128/152 bit WPA/WPA2 Enterprise (WPA-EAP using TKIP or AES) Hide SSID in Beacons MAC Address Filtering Filter up to 50 MAC addresses Wireless STA (Client) Connection List Reports various information in a timely manner as required by the administrator 802.1x Authenticator | Operating Temperature | -4 to 140°F / -20 to 60°C | Storage Temperature | -22 to 176°F / -30 to 80°C | Operating Humidity | 90% or less (non-condensing) | Storage Humidity | 90% or less (non-condensing) | Waterproof | IP55-rated enclosure | Certifications | FCC, CE | Dimensions | Not specified by manufacturer | Weight | Not specified by manufacturer | Package Weight | 5.5 lb | Box Dimensions (LxWxH) | 12.992 x 10.394 x 7.638" | |
The user manual for the EnGenius EnStation2 Long-Range Wireless 2.4 GHz N-ENSTATION2KIT can be downloaded in .pdf
format if it did not come with your new wireless access points, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other EnGenius users keep a unique electronic library
for EnGenius wireless access pointss,
where you can use our link to download the user manual for the EnGenius EnStation2 Long-Range Wireless 2.4 GHz N-ENSTATION2KIT.
The user manual lists all of the functions of the EnGenius EnStation2 Long-Range Wireless 2.4 GHz N-ENSTATION2KIT,
all the basic and advanced features and tells you how to use the wireless access points.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from EnGenius service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the EnGenius EnStation2 Long-Range Wireless 2.4 GHz N-ENSTATION2KIT. User manuals are also
available on the EnGenius website under Computers & Solutions - Networking - Wireless Access Points.
Question and answer discussion forum concerning user instructions and resolving problems with the EnGenius EnStation2 Long-Range Wireless 2.4 GHz N-ENSTATION2KIT - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the EnGenius EnStation2 Long-Range Wireless 2.4 GHz N-ENSTATION2KIT
|
|
|
|
|