|
User manual for Ensemble Designs BrightEye 76 HD Analog-to-Digital Video BE76
- Manufacturer: Ensemble Designs
- Basic description and contents of package
- Product classification: Professional Video - Signal Processing & Distribution - Analog & Digital Converters
- Safety instructions
- Startup and operation of the analog & digital converters
- Tips for setting up your Ensemble Designs
- Settings and expert assistance
- Contact Ensemble Designs service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Ensemble Designs BrightEye 76 HD Analog-to-Digital Video BE76,
which address similar problems with connecting and setting up Analog & Digital Converters Ensemble Designs.
|
User manual for the Ensemble Designs BrightEye 76 HD Analog-to-Digital Video BE76
The user manual for the Ensemble Designs BrightEye 76 HD Analog-to-Digital Video BE76 provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - Analog & Digital Converters.
The BrightEye 76 HD Analog-to-Digital Video Converter with Optical Output from Ensemble Designs is an analog-to-digital video converter and audio embedder. The unit accepts standard definition component or composite video and high definition analog component video. Audio can be input on (2) channels. Output of the signals with this unit is optical. This unit is well suited for use with HD cameras or similar devices that feature analog input and output. Use the converter to turn an HD camera into a digital source or as an affordable solution for a multi-camera studio.
The unit's digital output carries the uncompressed input signal synchronously to a genlock reference. Inputs are digitized to 12 bit resolution and time base is corrected by a noise tolerant tracking system. An external reference input allows genlock to a house reference. The built-in time base corrector & frame synchronizer can also be used to feed asynchronous or noisy signals to a connected BrightEye 75 unit.
The front panel interface allows you to control input selection, gain control, and time base correction. The unit can also be controlled through the BrightEye software package that is included with the unit and compatible with both Windows and Mac platforms.
|
If you own a Ensemble Designs analog & digital converters and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Ensemble Designs BrightEye 76 HD Analog-to-Digital Video BE76 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Ensemble Designs BrightEye 76 HD Analog-to-Digital Video BE76:
| Construction | Metal, plastic | | Finish | Blue, silver | | Inputs | ANALOG VIDEO INPUT
Quantity: x1
Type:
HD or SD :Y, Pr, Pb (SMPTE or Beta levels)
HD or SD: analog component
RGB (sync on green)
Analog composite PAL or NTSC
Analog S-video PAL or NTSC
Resolution: digitized at 12 bits
Impedance: 75Ω
Return loss: >40dB
Input DC: +/-1 volt DC
Input hum: <100mVANALOG AUDIO INPUTS
Quantity: x2
Type: balanced
Impedance: >15KΩ
Maximum input level: 24dBu
CMRR: >60dB, 20Hz to 10KHz
Quantization: 24 bits, 128x oversampled
Sample rate: 48KHz
Reference level: -10dBu or +4dBu
Frequency response: ±0.1dB, 20Hz to 20KHz
Crosstalk: <106dB
Dynamic Range: >106dB | | Outputs | OPTICAL OUTPUT
Quantity: x1
Type:
SD and ASI (SMPTE 297M, optical equivalent of 259M)
HD (SMPTE 274M or 296M)
Wavelength: 1310nm
Power: -7dBm
Maximum cable length: 12.42 miles (20 km)
Fiber type:
Single-mode
Multi-mode compatible with 8 dB attenuation at transmit end
Connector: SCEMBEDDED OUTPUT (in optical output)
Group assignment: one of four groups
Channels: x2
Bit depth: 24 bit
HD standards support:
1080i (SMPTE 274M -4,5,6) 50, 59.94 or 60 Hz
720p (SMPTE 296M -1,2,3) 50, 59.94 or 60 Hz
1080p (SMPTE 274M -9,10,11) 23.98,24, 25 Hz
1080sF (RP211 -14,15,16) 23.98, 24, 25Hz | | Reference | Quantity: x1
Type: 1Vp-p composite video, PAL or NTSC
Impedance: 75Ω
Return loss: >40dB | | Power | 12V, 7W
*100 to 230VAC modular power supply not included | | Dimensions (HxWxD) | 0.8 x 5.625 x 5.5" ( 20 x 143 x 140mm) | | Weight | Not specified by manufacturer | |
The user manual for the Ensemble Designs BrightEye 76 HD Analog-to-Digital Video BE76 can be downloaded in .pdf
format if it did not come with your new analog & digital converters, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Ensemble Designs users keep a unique electronic library
for Ensemble Designs analog & digital converterss,
where you can use our link to download the user manual for the Ensemble Designs BrightEye 76 HD Analog-to-Digital Video BE76.
The user manual lists all of the functions of the Ensemble Designs BrightEye 76 HD Analog-to-Digital Video BE76,
all the basic and advanced features and tells you how to use the analog & digital converters.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Ensemble Designs service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Ensemble Designs BrightEye 76 HD Analog-to-Digital Video BE76. User manuals are also
available on the Ensemble Designs website under Professional Video - Signal Processing & Distribution - Analog & Digital Converters.
Question and answer discussion forum concerning user instructions and resolving problems with the Ensemble Designs BrightEye 76 HD Analog-to-Digital Video BE76 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Ensemble Designs BrightEye 76 HD Analog-to-Digital Video BE76
|
|
|
|
|
