Operating instructions and pdf manual for use - Focusrite RedNet 2 - Dante Equipped 16-Channel Audio REDNET 2 User manual, User manual Focusrite RedNet 2 - Dante Equipped 16-Channel Audio REDNET 2, Focusrite, RedNet, 2, Dante, Equipped, 16-Channel,
User manual for Focusrite RedNet 2 - Dante Equipped 16-Channel Audio REDNET 2
Manufacturer: Focusrite
Basic description and contents of package
Product classification: Pro Audio - Computer Audio - Audio Interfaces & Systems
Safety instructions
Startup and operation of the audio interfaces & systems
Tips for setting up your Focusrite
Settings and expert assistance
Contact Focusrite service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the Focusrite RedNet 2 - Dante Equipped 16-Channel Audio REDNET 2,
which address similar problems with connecting and setting up Audio Interfaces & Systems Focusrite.
User manual for the Focusrite RedNet 2 - Dante Equipped 16-Channel Audio REDNET 2
The user manual for the Focusrite RedNet 2 - Dante Equipped 16-Channel Audio REDNET 2 provides
necessary instructions for the proper use of the product Pro Audio - Computer Audio - Audio Interfaces & Systems.
RedNet 2 from Focusrite is a sixteen-channel, remote controlled input/output analog audio interface that uses the Dante digital audio networking system to bring studio quality sound to any modern audio application. The unit features 24-bit A-D and D-A conversion for excellent audio performance, with 119 dB of dynamic range at sample rates up to 192 kHz. Rock-stable JetPLL clocking and premium multi-layered board circuitry further facilitate the delivery of uncompromised audio.
The RedNet system was designed for use in multiple audio applications, from live sound rigs to multi-room recording studios, houses of worship, audio distribution installations, post production environments and anything in-between. The system is scalable and delivers near zero latency audio distribution, with the ability to expand I/O channel count, interface digital components, and/or bridge between Pro Tools|HD or MADI and a Dante audio network.
There are three methods of connecting the RedNet 2 to a computer using a single Ethernet cable. These are via an optional RedNet PCIe card (for ASIO and Core Audio applications), directly into the computer's Ethernet port using DVS (Dante Virtual Soundcard) software where near zero latency is not essential, or through an existing RedNet 5 interface for connecting directly to Pro Tools HD, Pro Tools HDX and Pro Tools HD Native.
If you own a Focusrite audio interfaces & systems and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Focusrite RedNet 2 - Dante Equipped 16-Channel Audio REDNET 2 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Focusrite RedNet 2 - Dante Equipped 16-Channel Audio REDNET 2:
Specifications
Inputs
Analog Line Inputs: 16 Connector: 2 x 25-pin D-Sub female, wired to AES 59 0 dBFS Reference Levels: +18 or +24 dBu (switchable) Frequency Response: 20 Hz to 20 kHz, +/-0.05 dB THD+N: < 0.001%, unweighted, -1.0 dBFS input, 20 Hz to 22 kHz Dynamic Range: 119 dB A-weighted (-60 dBFS method) Converter Dynamic Range: 120 dB SNR: 119 dB A-weighted, 20 Hz to 20 kHz
Outputs
Analog Line Outputs: 16 Connector: 2 x 25-pin D-Sub female, wired to AES 59 0 dBFS Reference Levels: +18 or +24 dBu (switchable) Frequency Response: 20 Hz to 20 kHz, +/-0.15 dB THD+N: < 0.001%, unweighted, -1.0 dBFS input, 20 Hz to 22 kHz Dynamic Range: 119 dB A-weighted (-60 dBFS method) Converter Dynamic Range: 120 dB SNR: 119 dB A-weighted, 20 Hz to 20 kHz
Crosstalk
Input or Output to Input: <-90 db (all other channels at 0 dbfs) Input or Output to Output: <-100 dB (all other channels at 0 dBFS)
Digital Performance
Supported Sample Rates: 44.1, 48, 88.2, 96 and 192 kHz Clock Sources: Internal or from network master device
Front Panel Indicators
Power: 1 x Green Network Connected: 1 x Green Sync Lock: 1 x Green Sample Rate: 5 x Yellow Input/Output Range: 2 x Yellow Input/Output Signal Level: 16 x Bi-color (green = -42 dBFS; orange = -6 dBFS; red = overload)
The user manual for the Focusrite RedNet 2 - Dante Equipped 16-Channel Audio REDNET 2 can be downloaded in .pdf
format if it did not come with your new audio interfaces & systems, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Focusrite users keep a unique electronic library
for Focusrite audio interfaces & systemss,
where you can use our link to download the user manual for the Focusrite RedNet 2 - Dante Equipped 16-Channel Audio REDNET 2.
The user manual lists all of the functions of the Focusrite RedNet 2 - Dante Equipped 16-Channel Audio REDNET 2,
all the basic and advanced features and tells you how to use the audio interfaces & systems.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Focusrite service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Focusrite RedNet 2 - Dante Equipped 16-Channel Audio REDNET 2. User manuals are also
available on the Focusrite website under Pro Audio - Computer Audio - Audio Interfaces & Systems.
Question and answer discussion forum concerning user instructions and resolving problems with the Focusrite RedNet 2 - Dante Equipped 16-Channel Audio REDNET 2 - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17