|
User manual for Focusrite RedNet D16R 16-channel AES3 I/O for Dante REDNET D16R
- Manufacturer: Focusrite
- Basic description and contents of package
- Product classification: Pro Audio - Computer Audio - Accessories
- Safety instructions
- Startup and operation of the accessories
- Tips for setting up your Focusrite
- Settings and expert assistance
- Contact Focusrite service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Focusrite RedNet D16R 16-channel AES3 I/O for Dante REDNET D16R,
which address similar problems with connecting and setting up Accessories Focusrite.
|
User manual for the Focusrite RedNet D16R 16-channel AES3 I/O for Dante REDNET D16R
The user manual for the Focusrite RedNet D16R 16-channel AES3 I/O for Dante REDNET D16R provides
necessary instructions for the proper use of the product Pro Audio - Computer Audio - Accessories.
The RedNet D16R 16-channel AES3 I/O for Dante Audio over IP Networks from Focusrite is a 1U, 19" rack-mount Dante interface featuring16 channels of AES/EBU connectivity to and from the Dante audio network. The D16R is suitable for bridging between digital consoles, power amplifiers, or any other AES3-equipped audio equipment and any Dante network. The RedNet D16R includes SRC (Sample Rate Conversion) on each input pair allowing plug-and-play operation with any AES3 source. Word Clock I/O and DARS (Digital Audio Reference Signal) connections allow synchronization with a wide range of external sources and hardware, while S/PDIF I/O allows the integration of equipment such as CD, digital, or solid state recorders/players. The D16R features PSU and Ethernet redundancy, with dual locking etherCON Ethernet ports provided with several operating modes, including daisy-chaining and redundancy confirmed by front-panel indicators. Furthermore, the RedNet unit is fitted with two separate power supplies with fault-detection capability, with separate power input sockets (with retaining clips) on the rear of the unit. Power supply status is indicated both remotely and on the front panel. Additionally, the unit features a rugged, roadworthy exterior and high internal build quality. In addition, it offers a compact 1U rack-mount form-factor for a full 16 channels of I/O. Two DB25 connectors each provide eight channels of combined I/O to the AES59 standard, allowing speedy interconnection with other DB25-connected or XLR-based equipment by use of standard DB25 to XLR cables. The rear-panel XLR female input can be used either as a DARS sync source for the Dante system, or as an AES3 audio source replacing input channels 1-2 on the DB25 connectors.
|
If you own a Focusrite accessories and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Focusrite RedNet D16R 16-channel AES3 I/O for Dante REDNET D16R in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Focusrite RedNet D16R 16-channel AES3 I/O for Dante REDNET D16R:
Connectors (Rear Panel) | 2 x etherCON Network locking Ethernet connectors (compatible with standard RJ45 connectors) 2 x BNC Word Clock In and Out (with switchable 75 ohm input termination) 2 x RCA Phono S/PDIF In and Out* *Input replaces DB25 channels 3 & 4, output assignable to any adjacent odd/even pair of channels 1 x XLR male AES3 (AES/EBU); output duplicates DB25 outputs 1 & 2 1 x XLR female AES3 (AES/EBU); input for DARS or inputs 1 & 2 2 x DB25; 8 x channels of AES59 (AES/EBU) per connector (16 channels total) 2 x IEC power inputs (with retaining clips) | Sample Rate Converter | Input Sample Rate Range: 32 to 216 kHz Gain Error: -0.3 dB Dynamic Range: > 138 dB (-60 dBFS method) THD+N: < -130 dB (0.00003%); 0 dBFS input Latency: 11 to 45 samples (network and input sample rate dependent) | Digital Performance | Supported Sample Rates: 44.1, 48, 88.2, 96, 176.4,192 kHz Clock Sources: local or from network master device Local Clock Sources: Internal, DARS, Word Clock, Input 1-2, Input 9-10 External Word Clock Range: nominal sample rate ±7.5% | Indicators | Green LED power indicator Network Status: Primary/Secondary/Locked PSU: A/B Sample Rate: 44.1/48 kHz, x 2, x 4, Pull Signal Presence: in and out, one LED per two channels Clock Source: Word Clock, DARS, Input 1-2, Input 9-10, Internal | Controls | Power on/off | Power Supplies | 2 x internal; IEC inputs, 100 - 240 VAC, 50/60 Hz Apparent Power: 30 VA | Dimensions (H x W x D) | 1.75 x 19.0 x 10.35" (4.4 x 48.3 x 263 mm) | Weight | 8.47 lb (3.84 kg) | |
The user manual for the Focusrite RedNet D16R 16-channel AES3 I/O for Dante REDNET D16R can be downloaded in .pdf
format if it did not come with your new accessories, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Focusrite users keep a unique electronic library
for Focusrite accessoriess,
where you can use our link to download the user manual for the Focusrite RedNet D16R 16-channel AES3 I/O for Dante REDNET D16R.
The user manual lists all of the functions of the Focusrite RedNet D16R 16-channel AES3 I/O for Dante REDNET D16R,
all the basic and advanced features and tells you how to use the accessories.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Focusrite service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Focusrite RedNet D16R 16-channel AES3 I/O for Dante REDNET D16R. User manuals are also
available on the Focusrite website under Pro Audio - Computer Audio - Accessories.
Question and answer discussion forum concerning user instructions and resolving problems with the Focusrite RedNet D16R 16-channel AES3 I/O for Dante REDNET D16R - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Focusrite RedNet D16R 16-channel AES3 I/O for Dante REDNET D16R
|
|
|
|
|