User manual Golden Age Project PRE-573 MKII Plus - 500 Series PRE573MK2PLUS
Operating instructions and pdf manual for use - Golden Age Project PRE-573 MKII Plus - 500 Series PRE573MK2PLUS User manual, User manual Golden Age Project PRE-573 MKII Plus - 500 Series PRE573MK2PLUS, Golden, Age, Project, PRE-573, MKII, Plus, 500
User manual for Golden Age Project PRE-573 MKII Plus - 500 Series PRE573MK2PLUS
Manufacturer: Golden Age Project
Basic description and contents of package
Product classification: Pro Audio - Recording - Microphone Preamps
Safety instructions
Startup and operation of the microphone preamps
Tips for setting up your Golden Age Project
Settings and expert assistance
Contact Golden Age Project service
Troubleshooting
Warranty information
Price: 450 USD
We recommend checking out our discussion threads on the Golden Age Project PRE-573 MKII Plus - 500 Series PRE573MK2PLUS,
which address similar problems with connecting and setting up Microphone Preamps Golden Age Project.
User manual for the Golden Age Project PRE-573 MKII Plus - 500 Series PRE573MK2PLUS
The user manual for the Golden Age Project PRE-573 MKII Plus - 500 Series PRE573MK2PLUS provides
necessary instructions for the proper use of the product Pro Audio - Recording - Microphone Preamps.
The Golden Age Music PRE-573 MKII Plus 500 Series 1073-Style Microphone Preamp brings the classic 1073 sound to a 500 series lunchbox-style form factor. The "Plus" version of the microphone preamplifier uses Carnhill transformers for the input and output stages of the signal.
The unit is one lunchbox space wide and features a total gain range from -15 to +80 dB. The 10 to 70 dB range is handled by a turn switch, and a separate toggle switch allows you to select an additional 5 or 10 dB of gain. The input can be configured to accept line-level signals by another switch. The gain can be lowered by about 25 dB and the input impedance can be increased to approximately 15 kOhms.
The input impedance of the microphone input mode can be switched between 1200 and 300 ohms. Both phantom power and phase reverse are provided by selectable front-panel switches. An active DI input can be engaged with a high input impedance of about 1.5 MOhms. The output signal from the active DI circuit passes through the input transformer for extra character. The DI input can be changed to a purely passive input by a front-panel switch.
The two DI options make it possible to achieve different tones from electric instruments, and the passive DI input mode is more suitable for injecting active units like sound modules. A switchable AIR mode can be engaged to add a small boost above 10 kHz that peaks at 2 dB around 35 kHz.
A single LED serves as both a signal and overload indicator that starts glowing red at about +4 dBu and increases with intensity up to the maximum output level. A dedicated insert connector at the back of the unit allows it to interface with other GAP 500 modules. The insert can be activated by removing a jumper connector at the back of the module.
A second jumper at the back of the module selects 600 ohm termination at the output. The standard mode is termination on, since it gives the flattest response when the unit is used with modern line inputs that typically have an input impedance of 10 kOhms or more. The user can chose to remove the jumper and deactivate the termination resistor, which will increase the level above 10 kHz and create a peak in the response for an even more pronounced "Air" effect. The fully floating balanced output transformer can drive a 600 ohm load up to a level of about 28 dBu.
If you own a Golden Age Project microphone preamps and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Golden Age Project PRE-573 MKII Plus - 500 Series PRE573MK2PLUS in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Golden Age Project PRE-573 MKII Plus - 500 Series PRE573MK2PLUS:
Specifications
I/O
1x XLR mic 1x 1/4" DI 1x insert jumper 1x XLR output
Gain Range
10 to 70 dB
Input Impedance
Mic: between 1200 and 300 ohms Line: 15 kOhms HZ: 1.5 MOhms
Phantom Power
Switchable
Phase Reverse
Switchable
Treble Boost
AIR switch: above 10 kHz that peaks at 2 dB at 35 kHz
The user manual for the Golden Age Project PRE-573 MKII Plus - 500 Series PRE573MK2PLUS can be downloaded in .pdf
format if it did not come with your new microphone preamps, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Golden Age Project users keep a unique electronic library
for Golden Age Project microphone preampss,
where you can use our link to download the user manual for the Golden Age Project PRE-573 MKII Plus - 500 Series PRE573MK2PLUS.
The user manual lists all of the functions of the Golden Age Project PRE-573 MKII Plus - 500 Series PRE573MK2PLUS,
all the basic and advanced features and tells you how to use the microphone preamps.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Golden Age Project service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Golden Age Project PRE-573 MKII Plus - 500 Series PRE573MK2PLUS. User manuals are also
available on the Golden Age Project website under Pro Audio - Recording - Microphone Preamps.
Question and answer discussion forum concerning user instructions and resolving problems with the Golden Age Project PRE-573 MKII Plus - 500 Series PRE573MK2PLUS - no comments have been made yet - be the first to add a comment