|
User manual for Imagine Communications VSG-401 Compact Video and Audio VSG-401
- Manufacturer: Imagine Communications
- Basic description and contents of package
- Product classification: Professional Video - Signal Processing & Distribution - Video & Audio Signal Generators
- Safety instructions
- Startup and operation of the video & audio signal generators
- Tips for setting up your Imagine Communications
- Settings and expert assistance
- Contact Imagine Communications service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Imagine Communications VSG-401 Compact Video and Audio VSG-401,
which address similar problems with connecting and setting up Video & Audio Signal Generators Imagine Communications.
|
User manual for the Imagine Communications VSG-401 Compact Video and Audio VSG-401
The user manual for the Imagine Communications VSG-401 Compact Video and Audio VSG-401 provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - Video & Audio Signal Generators.
The 1RU Half-Rack VSG-401 Compact Video and Audio Signal Generator from Image Communications is a single channel SDI test generator with single-link and dual-link operation modes. You can select either four outputs for a single-link SDI 3 Gb/s, a single-link SDI 1.5 Gb/s, a single-link SDI 270 Mb/s, or two outputs of dual-link SDI (2 x 1.5 Gb/s). The unit can be externally referenced to color black (black burst) or to tri-level sync with user settings. This video and audio generator is used to test video format, frame rate, and signal type. It provides testing for up to 16 channels of embedded audio, with group enabled settings and global settings for amplitude and frequency.
|
If you own a Imagine Communications video & audio signal generators and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Imagine Communications VSG-401 Compact Video and Audio VSG-401 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Imagine Communications VSG-401 Compact Video and Audio VSG-401:
| Genlock Input | Input Connector: 1 x BNC
Input Impedance: Hi-Z
Black Burst Input Amplitude (nominal with ± 6 dB tolerance): NTSC: 286 mV, PAL: 300 mV
Return Loss: ≥40 dB to 10 MHz
Lock Range: ± 6 ppm (NTSC Fsc ± 21 Hz, PAL Fsc ± 26 Hz)
Black Burst Subcarrier Jitter: <1 ns (p-p) over one horizontal line
Tri-Level Sync Amplitude: 600 mV p-p nominal
Tri-Level Sync Amplitude Tolerance: ± 3 dB | | Outputs | Black Burst / Tri-level Sync (TLS):
Output Connectors: 2 x BNC female
Load Impedance: 75 ohms nominal
Return Loss: ≤ -40 dB (100 kHz to 10 MHz)
Black Burst Signal Level (nominal): NTSC: 286 mV, PAL: 300 mV
Black Burst Subcarrier Jitter: <1 ns (p-p) over one horizontal line
Tri-Level Signal Level: 600 mV p-p
DC Offset: 0 V ± 0.5 V
SC/H Phase: 0° ± 10º
Reference to Output Timing: ± 100 ns | | SDI Output | Output Connectors: 4 x BNC female
Output Impedance: 75 ohms nominal
Output Return Loss:
1.485 to 3 GHz ≤ -10 dB
5 MHz to 1.485 GHz ≤ -15 dB
Output Signal Level: 800 mV ± 10%
Output DC Offset: 0 V ± 0.5 V
Output Rise and Fall Time:
@ 2.97 GHz: <135 ps (20 to 80% amplitude), not differing by more than 50 ps
@ 1.484 GHz: <270 ps (20 to 80% amplitude), not differing by more than 100 ps
@ 270 MHz: 400 to 700 PS (20 to 80% amplitude), not differing by more than 500 PS
Jitter:
@ 2.97 GHz: <0.3UI
@ 1.484 GHz: <0.2 UI
@ 270 MHz: <0.2 UI | | Video | Output Formats: 3G/HD/SD/DL, selectable
Supported Formats: 1080i/60, 1080i/59.94, 1080i/50, 1080p/30, 1080p/29.97, 1080p/25, 1080p/24, 1080p/23.98, 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/25, 720p/24, and 720p/23.98
Segmented Frame: 1080p/30sF, 1080p/29.97sF, 1080p/25sF, 1080p/24sF, 1080p/23.98sF
Dual Link (per SMPTE 372M): 4:2:2 (YCBCR) 10-bit, 1080p/60, 1080p/59.94, 1080p/50
3G-SDI: 1080p: 60 Hz, 59.94 Hz, 50 Hz (4:2:2 Y'Cb'Cr/10-bit)
SD-SDI: 525i at 59.94 Hz, 625i at 50 Hz | | Test Signals | Color Bars: 100% color bars, 75% color bars, RP-219 with +I, RP-219 with -I, RP-219 100% white, RP-219 75% white, SMPTE bars
Patterns: Check field, 4:3 in 16:9, circle, co-sited pulse, cross hatch, flat field 0%, 50%, 100%, red field, visible field, line sweep, multiburst, multiburst Y only, pulse bar, limit ramp, shallow ramp, ramp Y only, 5 step Y only, zone plate, V2A timing | | Audio | Audio Formats: AES or DARS, unbalanced
Sample Rate: 48 kHz
Output Impedance: 75 ohms
Output Connectors: 2 x BNC
AES Output Return Loss: ≤ -25 dB @ -0.1 to 6 MHz
Output Signal Level: 1 V p-p (75 ohms terminated)
AES Jitter: 0.25 UI | | Word Clock | Output Connector: 1 x BNC female (shared with AES/DARS)
Output Impedance: 75 ohms nominal
Output Level: 5 V TTL (with 75 ohms load) | | Embedded Audio | Output Sample Rate: AES, 48 kHz
Output Level: 0, -9, -12, -20 dBFS and silence, user-selectable
Output Frequency: Fixed selections of 400 Hz, 1 kHz, and 10 kHz | | Interface Connector | 1 x RJ45, 10/100 Base-T Ethernet port | | Network Interface | IEEE 802.3 (Ethernet), 10/100 Base-T for web browser control | | Typical Applications | SMPTE RP 184-2004, SMPTE RP 165-1994, SMPTE RP 219, SMPTE 259M, SMPTE 272M, SMPTE 274M-2005, SMPTE 291M, SMPTE 292M-2006, SMPTE 295M, SMPTE 296M, SMPTE 299M, SMPTE 318M, SMPTE 352M, SMPTE 372M, SMPTE 424M, SMPTE 425M AB, SMPTE RP 184-2004, SMPTE RP 165-1994, SMPTE RP 219, SMPTE 318M, AES3-2003, AES11-2003 | | Power Requirements | 15 VDC nominal (11 to 18 VDC) | | Power Connector | 4-pin XLR, power input | | Temperature | Operating: 32° to 122° F (0° to 50° C)
Storage:- 22° to 149° F (- 30° to 65° C) | | Humidity | Operating: 20% to 80% (non-condensing)
Non-operating: 5% to 90% (non-condensing) | | Dimensions | 1.75 x 8.5 x 6.60" (4.45 x 21.59 x 16.76 cm) | | Weight | 1.66 lb (0.753 kg) | |
The user manual for the Imagine Communications VSG-401 Compact Video and Audio VSG-401 can be downloaded in .pdf
format if it did not come with your new video & audio signal generators, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Imagine Communications users keep a unique electronic library
for Imagine Communications video & audio signal generatorss,
where you can use our link to download the user manual for the Imagine Communications VSG-401 Compact Video and Audio VSG-401.
The user manual lists all of the functions of the Imagine Communications VSG-401 Compact Video and Audio VSG-401,
all the basic and advanced features and tells you how to use the video & audio signal generators.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Imagine Communications service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Imagine Communications VSG-401 Compact Video and Audio VSG-401. User manuals are also
available on the Imagine Communications website under Professional Video - Signal Processing & Distribution - Video & Audio Signal Generators.
Question and answer discussion forum concerning user instructions and resolving problems with the Imagine Communications VSG-401 Compact Video and Audio VSG-401 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Imagine Communications VSG-401 Compact Video and Audio VSG-401
|
|
|
|
|
