|
User manual for Intel X540-T1 Single Port Ethernet Converged Network X540T1
- Manufacturer: Intel
- Basic description and contents of package
- Product classification: Computers & Solutions - Networking - Network Interface Cards & Adapters
- Safety instructions
- Startup and operation of the network interface cards & adapters
- Tips for setting up your Intel
- Settings and expert assistance
- Contact Intel service
- Troubleshooting
- Warranty information
- Price: 300 USD
|
We recommend checking out our discussion threads on the Intel X540-T1 Single Port Ethernet Converged Network X540T1,
which address similar problems with connecting and setting up Network Interface Cards & Adapters Intel.
|
User manual for the Intel X540-T1 Single Port Ethernet Converged Network X540T1
The user manual for the Intel X540-T1 Single Port Ethernet Converged Network X540T1 provides
necessary instructions for the proper use of the product Computers & Solutions - Networking - Network Interface Cards & Adapters.
The X540-T1 Single Port Ethernet Converged Network Adapter from Intel is used by many OEMs (Original Equipment Manufacturers) as a single-chip solution for LAN on Motherboard (LOM) to deliver 10 Gigabit Ethernet (10 GbE) on server platforms. It works with legacy Gigabit Ethernet (GbE) switches and Cat 6A cabling. The auto-negotiation between 1 GbE and 10 GbE provides the necessary backwards compatibility for smooth transition and easy migration to 10 GbE.
|
If you own a Intel network interface cards & adapters and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Intel X540-T1 Single Port Ethernet Converged Network X540T1 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Intel X540-T1 Single Port Ethernet Converged Network X540T1:
Connector | RJ-45, Copper | Number of Ports | 1 | Cabling Type | 10GBASE-T: 100 m on Cat 6A, 55 m on Cat 6 1000BASE-T 100 m on Cat 5e, Cat 6 or Cat 6A 100BASE-T 100 m on Cat 5e, Cat 6 or Cat 6A | Bracket | Low profile and Full height | Data Rate | 100 Mbps, 1 Gbps, 10 Gbps | Bus Type | PCI Express 2.1 (5.0 GT/s) | Bus Width | x8 lane PCI Express, operable in x8 and x16 slots | Bus Speed | x8, encoded rate: 20 Gbps uni-directional; 40 Gbps bi-directional | Power Usage | 10 Gbps- 9.4 W 1 Gbps- 6.6 W 100 Mbps- 5.5 W | Interrupt Levels | INTA, MSI, MSI-X | Virtualization | Intel Virtualization Technology for Connectivity (VT-c) | Controller | Intel X540 | I/O | Data Direct I/O Technology | Ethernet Technology | Storage over Ethernet: iSCSI, FCoE, NFS, VT-c | Partitioning | Flexible Port Partitioning (FPP) | Queues | Virtual Machine Device Queues (VDMq) | RoHS Compliant | Yes | Advanced Software Features | Adapter Fault Tolerance (AFT) Switch Fault Tolerance (SFT) Adaptive Load Balancing (ALB) Virtual Machine Load Balancing (VMLB) Teaming support IEEE 802.3ad (Link Aggregation Control Protocol) PCIe Hot Plug/Active Peripheral Component Interconnect (PCI) IEEE 802.1Q VLANs IEEE 802.3 2005 flow control support Tx/Rx IP, TCP & UDP checksum offloading (IPv4, IPv6) capabilities, Transmission Control Protocol (TCP), User Datagram Protocol (UDP), Internet Protocol (IP) IEEE 802.1p TCP segmentation/large send offload MSI -X: Multiple independent queues Interrupt moderation IPv6 offloading | Network Management | Wired for Management (WfM) baseline v2.0 enabled for servers DMI 2.0 support, Windows Management Instrumentation (WMI) and SNMP Remote Installation Services (RIS) PXE 2.0 enabled through boot Read-Only Memory (ROM) | Certifications | IEEE 802.3ad (Link Aggregation Control Protocol) IEEE 802.1Q VLANs IEEE 802.3 2005 flow control support IEEE 802.1p FCC A, UL, CE, VCCI, BSMI, CTICK, KCC | Operating System Support | Windows 7 (IA32 and X64) Windows Server 2008/Windows Server 2008 Core/Windows Server 2008 R2/Windows Server 2008 R2 Core (x64 and IPF) Linux SLES 11 SP1 Microsoft Windows Server 2003 Microsoft Vista SUSE SLES 10 or later Professional 9.2 or later Microsoft Windows Virtual Server 2005 Red Hat Enterprise 4 or later FreeBSD 5.x or later support VMware ESX 4.0/4.1 ESXi 5.0 support Fedora EFI 1.1 | Package Weight | 0.6 lb | Box Dimensions (LxWxH) | 8.9 x 5.7 x 1.2" | |
The user manual for the Intel X540-T1 Single Port Ethernet Converged Network X540T1 can be downloaded in .pdf
format if it did not come with your new network interface cards & adapters, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Intel users keep a unique electronic library
for Intel network interface cards & adapterss,
where you can use our link to download the user manual for the Intel X540-T1 Single Port Ethernet Converged Network X540T1.
The user manual lists all of the functions of the Intel X540-T1 Single Port Ethernet Converged Network X540T1,
all the basic and advanced features and tells you how to use the network interface cards & adapters.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Intel service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Intel X540-T1 Single Port Ethernet Converged Network X540T1. User manuals are also
available on the Intel website under Computers & Solutions - Networking - Network Interface Cards & Adapters.
Question and answer discussion forum concerning user instructions and resolving problems with the Intel X540-T1 Single Port Ethernet Converged Network X540T1 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Intel X540-T1 Single Port Ethernet Converged Network X540T1
|
|
|
|
|