User manual Intelix SKYPLAY-MX Wireless HDMI Transmitter & Receiver Kit
Operating instructions and pdf manual for use - Intelix SKYPLAY-MX Wireless HDMI Transmitter & Receiver Kit User manual, User manual Intelix SKYPLAY-MX Wireless HDMI Transmitter & Receiver Kit, Intelix, SKYPLAY-MX, Wireless, HDMI, Transmitter, &, R
User manual for Intelix SKYPLAY-MX Wireless HDMI Transmitter & Receiver Kit
Manufacturer: Intelix
Basic description and contents of package
Product classification: Professional Video - Camcorder & Camera Peripherals - Wireless Transmission Systems
Safety instructions
Startup and operation of the wireless transmission systems
Tips for setting up your Intelix
Settings and expert assistance
Contact Intelix service
Troubleshooting
Warranty information
Price: 557 USD
We recommend checking out our discussion threads on the Intelix SKYPLAY-MX Wireless HDMI Transmitter & Receiver Kit,
which address similar problems with connecting and setting up Wireless Transmission Systems Intelix.
User manual for the Intelix SKYPLAY-MX Wireless HDMI Transmitter & Receiver Kit
The user manual for the Intelix SKYPLAY-MX Wireless HDMI Transmitter & Receiver Kit provides
necessary instructions for the proper use of the product Professional Video - Camcorder & Camera Peripherals - Wireless Transmission Systems.
This B&H kit provides an HDMI transmitter and receiver that allow you to wirelessly transmit HDMI signals with full HDCP compliance. The kit includes an Intelix SKYPLAY-DFS-S HDMI Transmitter and an Intelix SKYPLAY-DFS-R Wireless HDMI Receivers. Used together the units support transmitting HDMI signals up to 100 feet, and the signals can travel through sheet rock walls, so you can transmit to a receiver in another room. Each transmitter can feed up to four SKYPLAY-DFS-R receivers, allowing you to view the same signal on four different monitors. The system supports IR control of the HDMI source (if your HDMI source supports IR control.)
The system supports DFS (Dynamic Frequency Selection) for improved signal reception. Each receiver can accept signals from up to four SKYPLAY-DFS-S transmitters; this allows you to use one receiver to switch from up to four sources. The pair feature less than one frame signal delay, this means that any transmission delay is virtually unnoticeable. The system is HDCP 2.0 compliant, supporting EDID passthrough, so that your HDMI source and monitor will work just as they would if an HDMI cable connected them.
If you own a Intelix wireless transmission systems and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Intelix SKYPLAY-MX Wireless HDMI Transmitter & Receiver Kit in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Intelix SKYPLAY-MX Wireless HDMI Transmitter & Receiver Kit:
Specifications
Intelix SKYPLAY-DFS-S Wireless HDMI Distribution System with Dynamic Frequency Selection - Transmitter
I/O Connections
HDMI Output: 1 x HDMI Type-A receptacle IR Output: 1 x 3/16" (2.5mm) TS male connector 5V DC Power: 1 x 0.22" (5.5 mm) outside diameter, 0.08" (2.1 mm) inside diameter barrel
Supported Applications
Video Resolutions: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p and VESA up to 1920 x 1080 Color Depth: 30-bit Video Compliance: HDMI and HDCP Input Video Signal: 0.5 to 1.5 V p-p Input DDC Signal:5 V p-p Embedded Audio: PCM 2.0, DTS (5.1) and Dolby Digital (5.1) IR Frequency: 38 KHz
Signal Characteristics
Wireless Transmission Technology: Amimon Pro Signal Bandwidth: 40 MHz Maximum Transmission Distance: 100' (30.48 m) Transmission Rate: 6.75 Gbps Operating Frequency (Non-DFS): 5.19 to 5.23 GHz and 5.755 to 5.795 GHz Operating Frequency (DFS): 5.27 to 5.59 GHz and 5.67 GHz System Latency: <1ms Diagnostic Indicators: Power, Link and Video
Chassis
Black plastic material
Environmental
Operating Temperature: +14 to +104°F (-10 to +40°C) Operating Humidity: 15% to 85%, non-condensing Storage Temperature: -4 to +176°F (-20 to +80°C) Storage Humidity: 15% to 85%, non-condensing
Power, ESD, and Regulatory
Power Supply: 5 VDC 2.6 A Power Consumption: 9 W ESD Protection: 15 kV Regulatory: FCC, CE, RoHS
Dimensions (H x W x D)
With Rubber Feet: 1.14 x 3.19 x 4.02" (29 x 81 x 102 mm) Without Rubber Feet:1.10 x 3.19 x 4.02" (28 x 81 x 102 mm)
Intelix SKYPLAY-DFS-R Wireless HDMI Distribution System with Dynamic Frequency Selection - Receiver
I/O Connections
HDMI Output: 1 x HDMI Type-A receptacle 5V DC Power: 1 x Mini-USB Type-B connector
Supported Applications
Video Resolutions: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p and VESA up to 1920 x 1080 Color Depth: 30-bit Video Compliance: HDMI and HDCP Input Video Signal: 0.5 to 1.5 V p-p Input DDC Signal:5 V p-p Embedded Audio: PCM 2.0, DTS (5.1) and Dolby Digital (5.1) IR Frequency: 38 KHz
Signal Characteristics
Wireless Transmission Technology: Amimon Pro Signal Bandwidth: 40 MHz Maximum Transmission Distance: 100' (30.48 m) Transmission Rate: 6.75 Gbps Operating Frequency (Non-DFS): 5.19 to 5.23 GHz and 5.755 to 5.795 GHz Operating Frequency (DFS): 5.27 to 5.59 GHz and 5.67 GHz System Latency: <1ms Diagnostic Indicators: Link and Video
Chassis
Black plastic material
Environmental
Operating Temperature: +14 to +104°F (-10 to +40°C) Operating Humidity: 15% to 85%, non-condensing Storage Temperature: -4 to +176°F (-20 to +80°C) Storage Humidity: 15% to 85%, non-condensing
Power, ESD, and Regulatory
Power Supply: 5 VDC 2.6 A Power Consumption: 9 W ESD Protection: 15 kV Regulatory: FCC, CE, RoHS
Dimensions (H x W x D)
With Rubber Feet: 1.46 x 3.74 x 3.74" (37 x 95 x 95 mm) Without Rubber Feet: 1.30 x 3.74 x 3.74" (33 x 95 x 95 mm)
The user manual for the Intelix SKYPLAY-MX Wireless HDMI Transmitter & Receiver Kit can be downloaded in .pdf
format if it did not come with your new wireless transmission systems, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Intelix users keep a unique electronic library
for Intelix wireless transmission systemss,
where you can use our link to download the user manual for the Intelix SKYPLAY-MX Wireless HDMI Transmitter & Receiver Kit.
The user manual lists all of the functions of the Intelix SKYPLAY-MX Wireless HDMI Transmitter & Receiver Kit,
all the basic and advanced features and tells you how to use the wireless transmission systems.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Intelix service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Intelix SKYPLAY-MX Wireless HDMI Transmitter & Receiver Kit. User manuals are also
available on the Intelix website under Professional Video - Camcorder & Camera Peripherals - Wireless Transmission Systems.
Question and answer discussion forum concerning user instructions and resolving problems with the Intelix SKYPLAY-MX Wireless HDMI Transmitter & Receiver Kit - no comments have been made yet - be the first to add a comment