|
User manual for Lectrosonics IFBT4 - Frequency-Agile IFB Transmitter IFBT4-944
- Manufacturer: Lectrosonics
- Basic description and contents of package
- Product classification:
- Safety instructions
- Startup and operation of the
- Tips for setting up your Lectrosonics
- Settings and expert assistance
- Contact Lectrosonics service
- Troubleshooting
- Warranty information
- Price: 845 USD
|
We recommend checking out our discussion threads on the Lectrosonics IFBT4 - Frequency-Agile IFB Transmitter IFBT4-944,
which address similar problems with connecting and setting up Lectrosonics.
|
User manual for the Lectrosonics IFBT4 - Frequency-Agile IFB Transmitter IFBT4-944
The user manual for the Lectrosonics IFBT4 - Frequency-Agile IFB Transmitter IFBT4-944 provides
necessary instructions for the proper use of the product .
The IFBT4 from Lectrosonics is a high-quality IFB transmitter designed for applications where long operating range and great audio quality are needed, such as broadcasting, film, and theater. The sleek, simple box can be used as a stand-alone unit, or patched into other widely-used intercom systems. The single XLR input connector is accompanied by four DIP-switches for selecting a mic, line, Clear Com, RTS1, or RTS2 audio source.
The Digital Hybrid Wireless technology allows the system to overcome channel noise by digital encoding and decoding audio in the transmitter and receiver, but sends the encoded signal over an analog FM signal. Due to the FM link being used, the system has all the benefits of traditional FM systems, including high range and resistance to interference, but thanks to the digital technology, the analog compander and artifacts are removed for greater audio quality.
The system is easy to use, featuring a menu-based, microprocessor-controlled system that is navigated with momentary buttons. The backlit LCD is bright and clear for easy reading. The casing is constructed from rugged aluminum to withstand the rigors of professional use, and it is small enough to use in any situation.
|
If you own a Lectrosonics and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Lectrosonics IFBT4 - Frequency-Agile IFB Transmitter IFBT4-944 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Lectrosonics IFBT4 - Frequency-Agile IFB Transmitter IFBT4-944:
Operating Frequency | 614.4 to 639.9MHz | Frequencies | 256 Channels Per Block | Channel Spacing | 100kHz | Spurious and Harmonic Suppression | 37dBc Above 1GHz | Frequency Stability | ±0.001% (10 ppm) @ 25°C | Temperature Stability | ±0.001% (10 ppm) @ -30 to +50°C | Compatibility Modes | IFB, Digital Hybrid Wireless (400 Series), 100 Series, 200 Series, Mode 3, Mode 6 | Pilot Tone | 29.997kHz IFB Mode, 32.765kHz 200 Mode, 400 Mode Step Selected, 32.768kHz Mode 6 | Modulation | FM, ±20kHz Deviation IFB & 100 Mode, ±75kHz 200 & 400 Mode, ±50kHz Mode 3 and Mode 6 | Audio Frequency Response | 100Hz - 8kHz, ±1dB IFB Mode 30Hz - 20kHz, ±1dB 200 & 400 Mode | Low Frequency Roll-Off | 3dB Down @ 35 or 50Hz, Menu Selectable | Signal to Noise Ratio | 90dB Typical, A-Weighted | RF Power Output | 250mW, Nominal | Output Impedance | 50 Ohms | Audio Input Level | Line, RTS1, RTS2: 0dBu Clear Com: -10dBu Mic Dry Inputs: -42dBu | Audio Input Impedance | Balanced: Greater than 2 kOhms Unbalanced: Greater than 1 kOhm | Gain | -18 to +24dB, Software Selectable | Connectors | 1 x XLR Input Connector 1 x BNC Antenna Connector 1 x DC Power Input | Controls and Indicators | 4 x Mode Switches (For Selecting Type of Input Source) 1 x Menu Button 2 x Select Buttons (Up/Down) 1 x Off/Tune/Xmit Switch 1 x Backlit LCD Display | Power | 12-14VDC, Typical, 200mA Max | Dimensions (LxWxH) | 5.25 x 3.25 x 1.25" (133 x 83 x 32mm) | Weight | 9 oz (255g) | Package Weight | 3.3 lb | Box Dimensions (LxWxH) | 14.0 x 10.5 x 4.2" | |
The user manual for the Lectrosonics IFBT4 - Frequency-Agile IFB Transmitter IFBT4-944 can be downloaded in .pdf
format if it did not come with your new , although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Lectrosonics users keep a unique electronic library
for Lectrosonics s,
where you can use our link to download the user manual for the Lectrosonics IFBT4 - Frequency-Agile IFB Transmitter IFBT4-944.
The user manual lists all of the functions of the Lectrosonics IFBT4 - Frequency-Agile IFB Transmitter IFBT4-944,
all the basic and advanced features and tells you how to use the .
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Lectrosonics service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Lectrosonics IFBT4 - Frequency-Agile IFB Transmitter IFBT4-944. User manuals are also
available on the Lectrosonics website under .
Question and answer discussion forum concerning user instructions and resolving problems with the Lectrosonics IFBT4 - Frequency-Agile IFB Transmitter IFBT4-944 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Lectrosonics IFBT4 - Frequency-Agile IFB Transmitter IFBT4-944
|
|
|
|
|