|
User manual for Lectrosonics SSM Digital Hybrid Wireless Miniature SSM A1
- Manufacturer: Lectrosonics
- Basic description and contents of package
- Product classification: Pro Audio - Location Sound - Wireless Transmitters
- Safety instructions
- Startup and operation of the wireless transmitters
- Tips for setting up your Lectrosonics
- Settings and expert assistance
- Contact Lectrosonics service
- Troubleshooting
- Warranty information
Click to enlarge image
|
We recommend checking out our discussion threads on the Lectrosonics SSM Digital Hybrid Wireless Miniature SSM A1,
which address similar problems with connecting and setting up Wireless Transmitters Lectrosonics.
|
User manual for the Lectrosonics SSM Digital Hybrid Wireless Miniature SSM A1
The user manual for the Lectrosonics SSM Digital Hybrid Wireless Miniature SSM A1 provides
necessary instructions for the proper use of the product Pro Audio - Location Sound - Wireless Transmitters.
The SSM from Lectrosonics is a miniature Digital Hybrid Wireless Transmitter with selectable frequencies across a maximum tuning range of 76.7 MHz and has selectable 25 or 50 mW RF output power. It can be used in applications where concealment in costuming is required or any other production such as for live stage, theater, houses of worship, reality TV, and more.
|
If you own a Lectrosonics wireless transmitters and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Lectrosonics SSM Digital Hybrid Wireless Miniature SSM A1 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Lectrosonics SSM Digital Hybrid Wireless Miniature SSM A1:
Operating Frequency | A1: 470.100 to 537.575 MHz | Frequency Selection Steps | Selectable; 100 kHz steps or 25 kHz | RF Power Output | Switchable; 25 or 50 mW | Pilot Tone | 25 to 32 kHz; 5 kHz deviation (Digital Hybrid mode) | Frequency Stability | ± 0.002% | Deviation | ± 75 kHz max. (Digital Hybrid mode) | Spurious Radiation | 60 dB below carrier | Equivalent Input Noise | -120 dBV, A-weighted | Input Level | Nominal 2 to 300 mV, before limiting Greater than 1 V maximum, with limiting | Input Impedance | Mic: 300 or 4.5 kOhms; selectable Line: Greater than 100 kOhms | Input Limiter | DSP controlled, dual envelope "soft" limiter with greater than 30 dB range | Gain Control Range | 44 dB; digital control | Modulation Indicators | Dual bicolor LEDs indicate modulation of -20, -10, 0 and +10 dB referenced to full modulation | Frequency Response | 35 Hz to 20 kHz (+/-1 dB) | Low Frequency Roll-Off | -12 dB/octave; 70 Hz | Total Harmonic Distortion (THD) | 0.2% (typical) | Signal to Noise Ratio | At Receiver Output: SmartNR Off: No limiting 103.5, w/limiting 108.0 SmartNR Normal: No limiting 107.0, w/limiting 111.5 SmartNR Full: No limiting 108.5, w/limiting 113.0
Note: The dual envelope "soft" limiter provides the handling of transients using variable attack and release time constants. Once activated, the limiter compresses 30+ dB of transmitter input range into 4.5 dB of receiver output range, thus reducing the measured figure for SNR without limiting by 4.5 dB | Controls | Side-panel membrane switches with LCD interface for power on/off and all setup and configuration controls Responds to remote commands from smartphones with 3rd party app. | Audio Input Jack | LEMO 00 series 3-pin | Antenna | Galvanized steel, flexible wire | Batteries | Lithium-ion 3.7 V 1000 mAH NP50 battery pack | Battery Life | 6 hours per charge | Emission Standard | 180KF3E | Dimensions (L x W x H) | 2.3 x 1.5 x 0.56" (58.4 x 38 x 14.2 mm) | Weight | 2.3 oz (65.2 g) including lithium battery pack | Package Weight | 1.2 lb | Box Dimensions (LxWxH) | 9.9 x 7.9 x 3.0" | |
The user manual for the Lectrosonics SSM Digital Hybrid Wireless Miniature SSM A1 can be downloaded in .pdf
format if it did not come with your new wireless transmitters, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Lectrosonics users keep a unique electronic library
for Lectrosonics wireless transmitterss,
where you can use our link to download the user manual for the Lectrosonics SSM Digital Hybrid Wireless Miniature SSM A1.
The user manual lists all of the functions of the Lectrosonics SSM Digital Hybrid Wireless Miniature SSM A1,
all the basic and advanced features and tells you how to use the wireless transmitters.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Lectrosonics service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Lectrosonics SSM Digital Hybrid Wireless Miniature SSM A1. User manuals are also
available on the Lectrosonics website under Pro Audio - Location Sound - Wireless Transmitters.
Question and answer discussion forum concerning user instructions and resolving problems with the Lectrosonics SSM Digital Hybrid Wireless Miniature SSM A1 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Lectrosonics SSM Digital Hybrid Wireless Miniature SSM A1
|
|
|
|
|