|
User manual for Lewitt LCT 940 Premium Large-Diaphragm FET Condenser and LCT-940
Overall Rating: 5.0
100% of respondents would recommend this to a friend.
- Manufacturer: Lewitt
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Large Diaphragm Condenser
- Safety instructions
- Startup and operation of the large diaphragm condenser
- Tips for setting up your Lewitt
- Settings and expert assistance
- Contact Lewitt service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Lewitt LCT 940 Premium Large-Diaphragm FET Condenser and LCT-940,
which address similar problems with connecting and setting up Large Diaphragm Condenser Lewitt.
|
User manual for the Lewitt LCT 940 Premium Large-Diaphragm FET Condenser and LCT-940
The user manual for the Lewitt LCT 940 Premium Large-Diaphragm FET Condenser and LCT-940 provides
necessary instructions for the proper use of the product Pro Audio - Recording - Large Diaphragm Condenser.
The LCT 940 Premium Large-Diaphragm FET Condenser and Tube Microphone from Lewitt combines the specific characteristics of a premium large-diaphragm FET condenser microphone and tube microphone in one housing. You can choose between the two main settings ("FET" and "Tube") or mix and merge the characteristics of the two, providing various creative possibilities for artists and producers. The LCT 940 also features a total of nine different polar patterns: cardioid, omnidirectional, figure-8, wide-cardioid, super-cardioid, and four additional intermediate patterns. The microphone's PSU (power supply unit) offers four levels of attenuation and four switchable high-pass filters, indicators, and push buttons for noiseless handling. Additional attributes are automatic attenuation and clipping history. The microphone and the PSU are connected via an included 26' 11-pin XLR cable.
|
If you own a Lewitt large diaphragm condenser and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Lewitt LCT 940 Premium Large-Diaphragm FET Condenser and LCT-940 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Lewitt LCT 940 Premium Large-Diaphragm FET Condenser and LCT-940:
| Acoustic Principle | Pressure gradient transducer, externally polarized | | Transducer | 1.0" (25.4 mm) | | Directional Pattern | Omni, broad-cardioid, cardioid, super-cardioid, figure-8, and an additional four intermediate patterns | | Frequency Range | 20 Hz - 20 kHz | | Sensitivity | 23 mV / Pa (-33 dBV), cardioid
20 mV / Pa (-34 dBV), omni
23 mV / Pa (-33 dBV), figure-8 | | Signal / Noise | FET: 86 dBA
Tube: 82 dBA | | Equivalent Noise Level | FET:
8 dBA, cardioid (IEC 61672-1)
9 dBA, omni (IEC 61672-1)
8 dBA, figure-8 (IEC 61672-1)
Tube:
12 dBA, cardioid (IEC 61672-1)
13 dBA, omni (IEC 61672-1)
12 dBA, figure-8 (IEC 61672-1) | | Dynamic Range | FET: 135 dBA
Tube: 128 dBA | | Maximum SPL for 0.5% THD | FET:
143 dB, 0 dB pre-attenuation
149 dB, 6 dB pre-attenuation
155 dB, 12 dB pre-attenuation
161 dB, 18 dB pre-attenuation
Tube:
140 dB, 0 dB pre-attenuation
146 dB, 6 dB pre-attenuation
152 dB, 12 dB pre-attenuation
158 dB, 18 dB pre-attenuation | | Pad | 6 dB, 12 dB, 18 dB switchable, selectable via remote control | | Bass Cut Filter | 12 dB / octave at 40 Hz
6 dB / octave at 150 Hz
6 dB / octave at 300 Hz | | Gain Control | Pre-attenuation pad: 6 dB, 12 dB, 18 dB | | Impedance | < 200 Ohms (rated) | | Load Impedance | > 1 kOhm (rated) | | Dimensions | 7.5 x 2.4 x 1.8" (192.0 x 60 x 46 mm) | | Net Weight | 1.45 lb (0.66 kg) | | Supply Voltage | 230 VAC, 50 Hz
110 VAC, 60 Hz | | Current Consumption | 170 mA | | Connectors | Back Panel:
1 x 3-pin XLR female, microphone output
1 x 11-pin XLR female, microphone input
1 x EIC male, power connector | | Controls | Front Panel:
1 x Pre-attenuation push button
1 x High-pass filter push button
1 x Stageless amplification, rotary knob
1 x Polar pattern selection via jog-dial
Back Panel:
1 x Voltage selection switch
1 x On/Off switch | | Indicators | Front Panel:
1 x Pre-attenuation
1 x High-pass filter
1 x Polar pattern
1 x Stageless amplification | | Dimensions | 9.8 x 5.9 x 2.8" (250.0 x 150.0 x 70.0 mm) | | Net Weight | 4.25 lb (1.93 kg) | |
The user manual for the Lewitt LCT 940 Premium Large-Diaphragm FET Condenser and LCT-940 can be downloaded in .pdf
format if it did not come with your new large diaphragm condenser, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Lewitt users keep a unique electronic library
for Lewitt large diaphragm condensers,
where you can use our link to download the user manual for the Lewitt LCT 940 Premium Large-Diaphragm FET Condenser and LCT-940.
The user manual lists all of the functions of the Lewitt LCT 940 Premium Large-Diaphragm FET Condenser and LCT-940,
all the basic and advanced features and tells you how to use the large diaphragm condenser.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Lewitt service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Lewitt LCT 940 Premium Large-Diaphragm FET Condenser and LCT-940. User manuals are also
available on the Lewitt website under Pro Audio - Recording - Large Diaphragm Condenser.
Question and answer discussion forum concerning user instructions and resolving problems with the Lewitt LCT 940 Premium Large-Diaphragm FET Condenser and LCT-940 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Lewitt LCT 940 Premium Large-Diaphragm FET Condenser and LCT-940
|
|
|
|
|
