User manual for Moog 500 Series Analog Delay 500-DELAY
- Manufacturer: Moog
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Effects Processors
- Safety instructions
- Startup and operation of the effects processors
- Tips for setting up your Moog
- Settings and expert assistance
- Contact Moog service
- Warranty information
- Price: 899 USD
We recommend checking out our discussion threads on the Moog 500 Series Analog Delay 500-DELAY,
which address similar problems with connecting and setting up Effects Processors Moog.
User manual for the Moog 500 Series Analog Delay 500-DELAY
The user manual for the Moog 500 Series Analog Delay 500-DELAY provides
necessary instructions for the proper use of the product Pro Audio - Recording - Effects Processors.
The 500-Series Analog Delay from Moog is a digitally controllable analog delay that can provide up to 800ms of delay. All of the delay's parameters, including its LFO and waveform, can be set through your DAW thanks to its compatible VST, AU, and RTAS format plug-in and front-panel 5-pin DIN MIDI connector.
The delay has a 6 waveform LFO that allows it to branch out and create other time-based effects such as chorus, extreme modulation, and tape-delay style effects. For additional creative effects, there is a 1/4" tap-tempo CV input on the delay's front panel, allowing you to integrate an external CV source to modulate a variety of parameters.
If you own a Moog effects processors and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Moog 500 Series Analog Delay 500-DELAY in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Moog 500 Series Analog Delay 500-DELAY:
| Input || Balanced Line-Level: +18 dBμ to -12 dBμ (via 500 series rack) |
| Input Impedance || 1 MΩ differential or single ended, common mode 48 kΩ |
| Output Impedance || 50Ω differential 25Ω single ended |
| Maximum Output Level || Better than +28dBμ, balanced |
| Gain || Drive: 30dB range of control |
Output: 30dB range of control
| Frequency Response || Dry: Better than +/-0.5 dB 20 Hz to 20 kHz pass band |
Wet: 0.5 x 20 Hz to 2.6 kHz, 1.0x 20 Hz to 1.65 kHz, nominal
| Bypass || Hard relay true bypass |
| Power Consumption || 130 mA, +16 V, <60 mA, -16 V |
| Package Weight || 2.05 lb |
| Box Dimensions (LxWxH) || 8.8 x 8.3 x 4.1" |
The user manual for the Moog 500 Series Analog Delay 500-DELAY can be downloaded in .pdf
format if it did not come with your new effects processors, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Moog users keep a unique electronic library
for Moog effects processorss,
where you can use our link to download the user manual for the Moog 500 Series Analog Delay 500-DELAY.
The user manual lists all of the functions of the Moog 500 Series Analog Delay 500-DELAY,
all the basic and advanced features and tells you how to use the effects processors.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Moog service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Moog 500 Series Analog Delay 500-DELAY. User manuals are also
available on the Moog website under Pro Audio - Recording - Effects Processors.
Question and answer discussion forum concerning user instructions and resolving problems with the Moog 500 Series Analog Delay 500-DELAY - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Moog 500 Series Analog Delay 500-DELAY