|
User manual for Nebula 6000pro 3-Axis Brushless Gimbal Stabilizer FPNE60002
- Manufacturer: Nebula
- Basic description and contents of package
- Product classification: Professional Video - Tripods, Supports & Rigs - Gimbal Stabilizers
- Safety instructions
- Startup and operation of the gimbal stabilizers
- Tips for setting up your Nebula
- Settings and expert assistance
- Contact Nebula service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Nebula 6000pro 3-Axis Brushless Gimbal Stabilizer FPNE60002,
which address similar problems with connecting and setting up Gimbal Stabilizers Nebula.
|
User manual for the Nebula 6000pro 3-Axis Brushless Gimbal Stabilizer FPNE60002
The user manual for the Nebula 6000pro 3-Axis Brushless Gimbal Stabilizer FPNE60002 provides
necessary instructions for the proper use of the product Professional Video - Tripods, Supports & Rigs - Gimbal Stabilizers.
The Nebula6000pro 3-Axis Brushless Gimbal Stabilizer with Nebula Arm [Single] from Filmpower is a handheld stabilizer designed to support loads up to 17.6 pounds, making it suitable for a wide range of camera systems, from DSLRs to professional cinema cameras such as the Canon C300/500, Sony F5/F55, and RED EPIC. To provide stabilization, the system utilizes three motors that counteract movement along the pan, tilt, and roll axes. This compensates for shakes, vibrations, and other unwanted movements, lettings you capture smooth, free-floating shots. The stabilizer is designed to be handheld using two side handles, with a top handle available for low-angle shots.
To reduce arm fatigue while shooting, the single-arm version of the Nebula Arm is included, which consists of a vest, height adjustable support arm, and a bungee cord with hook that attach to openings in the stabilizer's arms or top handle. The system can support loads between 6.6 and 17.6 pounds. When not in use, it folds down to fit in an included carry bag.
The stabilizer offers three different operating modes. You can choose to lock the camera in place along all three axes (pitch, yaw, roll), or select modes where the camera will smoothly follow as you pan and tilt the device. Pitch (tilt) and yaw (pan) can also be remotely controlled by a dedicator operator using an included RC transmitter. To accommodate camera accessories, such as an external monitor, numerous 1/4"-20 and 3/8"-16 threaded holes are provided on the arms and handles. For accessories such as a wireless follows focus, the system features front 15mm rods on the camera platform.
As with sled-style stabilizers, the camera should be balanced to ensure best performance. To assist with balancing and camera attachment, the stabilizer features a quick-release plate. Additionally, a foldable carbon fiber balancing stand is provided for easy balancing in the field. Once balanced, the Nebula6000pro can be linked via Bluetooth to an Android or iOS mobile device for configuration and parameter adjustment.
The Nebula6000pro is powered using a 4000mAh lithium-polymer battery that provides up to four hours of operating time. A battery charger is included. Also included is a hook-and-loop belt, hex keys and screws, handle non-slip belts, and a hard case for convenient storage and transportation of the stabilizer system and transmitter. The Nebula Arm comes with its own bag to store the vest, folded arm, and bungees.
|
If you own a Nebula gimbal stabilizers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Nebula 6000pro 3-Axis Brushless Gimbal Stabilizer FPNE60002 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Nebula 6000pro 3-Axis Brushless Gimbal Stabilizer FPNE60002:
| Load Capacity | 17.6 lb (8 kg) | | Camera Compatibility | Max. Camera Width: 10.2" (26 cm) | | Battery Voltage | 14.8 VDC | | Battery Capacity | 4000mAh | | Dimensions | Stabilizer: 14.2 x 18.9 x 18.1" (36 x 48 x 46 cm)
Hard Case: 22.8 x 21.7 x 6.7" (58 x 55 x 17 cm) | | Weight | 5.7 lb (2.6 kg) | | Load Capacity | 6.6 to 17.6 lb (3 to 8 kg) | | Dimensions | Lower Arm: 23.6" (60 cm)
Upper Arm: 19.7" (50 cm) | | Weight | 6.6 lb (3 kg) | |
The user manual for the Nebula 6000pro 3-Axis Brushless Gimbal Stabilizer FPNE60002 can be downloaded in .pdf
format if it did not come with your new gimbal stabilizers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Nebula users keep a unique electronic library
for Nebula gimbal stabilizerss,
where you can use our link to download the user manual for the Nebula 6000pro 3-Axis Brushless Gimbal Stabilizer FPNE60002.
The user manual lists all of the functions of the Nebula 6000pro 3-Axis Brushless Gimbal Stabilizer FPNE60002,
all the basic and advanced features and tells you how to use the gimbal stabilizers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Nebula service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Nebula 6000pro 3-Axis Brushless Gimbal Stabilizer FPNE60002. User manuals are also
available on the Nebula website under Professional Video - Tripods, Supports & Rigs - Gimbal Stabilizers.
Question and answer discussion forum concerning user instructions and resolving problems with the Nebula 6000pro 3-Axis Brushless Gimbal Stabilizer FPNE60002 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Nebula 6000pro 3-Axis Brushless Gimbal Stabilizer FPNE60002
|
|
|
|
|
