|
User manual for Neumann KH 120 D Studio Monitor with Digital I/O and KH 120 D
- Manufacturer: Neumann
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Studio Monitors
- Safety instructions
- Startup and operation of the studio monitors
- Tips for setting up your Neumann
- Settings and expert assistance
- Contact Neumann service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Neumann KH 120 D Studio Monitor with Digital I/O and KH 120 D,
which address similar problems with connecting and setting up Studio Monitors Neumann.
|
User manual for the Neumann KH 120 D Studio Monitor with Digital I/O and KH 120 D
The user manual for the Neumann KH 120 D Studio Monitor with Digital I/O and KH 120 D provides
necessary instructions for the proper use of the product Pro Audio - Recording - Studio Monitors.
The Neumann KH 120 D Studio Monitor with Digital I/O and Digital Delay combines a 1" titanium fabric dome tweeter powered by 50 W RMS (80 W peak) of analog amplification with a 5.25" long throw composite sandwich cone bass driver powered by 50 W RMS (80 W peak) analog amplification with dual front panel bass ports. The two speaker drivers are mounted in an elliptical mathematically modeled dispersion waveguide for smoother off-axis response and a more forgiving sound signature in different acoustical environments.
This model is designed to be used as a near-field loudspeaker or as a rear loudspeaker in larger multi-channel systems. It features both analog and daisy-chainable digital BNC I/O for flexible digital inter-connectivity (24 bit, 192 kHz, AES3, and S/P-DIF). It also features digital Lipsync delay (from 0 to 10/12 frames) for aligning audio and video signals as well as digital time-of-flight delay (from 0 to 400 ms) to compensate for different listening distances.
The front panel is made from one piece without discontinuities to reduce diffraction with protective metal grills and the cabinet is made of magnetically shielded aluminum to reduce resonances, improve heat dissipation, and extend the operating lifetime of the unit. The monitor is suitable for professional tracking, mixing, and mastering applications in broadcast, project, and post-production studios.
The system delivers a free field frequency response of 52 to 21,000 Hz with 4-position bass, low-mid, and treble acoustical controls for tailoring the response to different rooms and an input gain control from 0 to -15 dB. The front panel Neumann logo functions as an LED indicator for power and clip/limiting but can also be dimmed for light applications and for use when placed behind screens. A variety of wall, ceiling, truss, subwoofer, stand, and surface mounting options are available through a range of accessories (sold separately).
|
If you own a Neumann studio monitors and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Neumann KH 120 D Studio Monitor with Digital I/O and KH 120 D in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Neumann KH 120 D Studio Monitor with Digital I/O and KH 120 D:
| Frequency Response | Free Field: 52 to 21,000 Hz ±3 dB
Pass Band Free Field: 54 to 20,000 Hz ±2 dB | | Self Noise | < 20 dB(A) at 10 cm | | Total Harmonic Distortion (THD) | > 100 Hz (<0.5% at 96 dB SPL at 1 m) | | Max SPL Level | Full Space: 105.1 dB
Half Space at 3% THD at 1 M: 111.1 dB
Short Term SPL with IEC-Weighted Noise: 107 dB(C)
With Music Material at 2.3 m (pair): 97 dB(C) (full range), 104 dB(C) (with subwoofer)
Long Term SPL with Pink Noise at 2.3 M, In Typical Listening Conditions (single/pair): 88/93 dB(C) SPL (full range, 89/94 dB(C) SPL (with subwoofer) | | Bass Capability | 104.8 dB (Averaged between 50 and 100 Hz at Max SPL in half space at 3% THD at 1 m) | | Amplifier | Woofer: 50 W (80 W peak)
Tweeter: 50 W (80 W peak) | | Controller Design | Analog, active | | Crossover Frequency | 2,000 Hz | | Crossover Slope | 24 dB/octave, 4th order | | Equalization | Bass: 0, -2.5, -5. -7.5 dB
Mid: 0, -1.5, -3, -4.5 dB
High: +1, 0, -1, -2 dB | | Protection Circuits | Limiter, low, high | | Infrasonic filter protection | 30 Hz; 6 dB/octave | | Impedance | 10 k Ohms in position 94/108 dB SPL at 1 m
20 k Ohms in position 100/114 dB SPL at 1 m | | Input Gain Control | 0 to -15 dB | | Output Level Control | 94, 100, 108, 114 dB | | CMRR | >56 dB at 15,000 Hz | | Maximum Input Level | 24 dBu | | Indicators | Power On: Neumann logo "white"
Limit/Clip: Neumann logo "red"
Digital Error: flash "red" | | Power Supply | 100 to 240 V; 50/60 Hz | | Power Consumption | Idle: 20 W
Full Output AC: 200 W | | BNC Connectors | AES3
S/P-DIF | | Impedance | 75 Ohms (input/output) | | Input Switching | Analog, Digital A, Digital B, Digital A+B (all available with and without delay) | | Resolution | 16 to 24-bit DAC, Δ∑ | | Sampling Rate | 32 to 192 kHz | | Sensitivity | -18 dBFS | | Dynamic Range | 120 dB | | Delay | Audio-Video: 0 to 409.5 ms
Time-of-Flight: 0 to 409.5 ms
Audio-Video/Lip Sync Max Frames: 0 to 10.2 (40 ms) frames, 0 to 12.3 (33 ms) frames | | Time | Resolution: 0.1 ms / 3.4 cm (1.375") | | Cabinet | Painted aluminum, anthracite (RAL 7021)
Powder-coated aluminum, white (RAL 9016) | | Operating Conditions | +50 to +104° F (+10 to +40° C)
<90% relative humidity, non-condensing | | Drivers | Magnetically Shielded
Woofer: 5.25" (130 mm)
Tweeter: 1.00" (25.0 mm) | | Mounting | 2x M8 on rear panel | | Volume | Internal: 6.5 liters
External: 9.7 liters | | Dimensions (H x W x D) | 10.875 x 7.125 x 8.625 (277.0 x 182.0 x 220.0 mm) | | Weight | 14.3 lb (6.50 kg) | | Package Weight | 19.2 lb | | Box Dimensions (LxWxH) | 16.299 x 14.173 x 11.181" | |
The user manual for the Neumann KH 120 D Studio Monitor with Digital I/O and KH 120 D can be downloaded in .pdf
format if it did not come with your new studio monitors, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Neumann users keep a unique electronic library
for Neumann studio monitorss,
where you can use our link to download the user manual for the Neumann KH 120 D Studio Monitor with Digital I/O and KH 120 D.
The user manual lists all of the functions of the Neumann KH 120 D Studio Monitor with Digital I/O and KH 120 D,
all the basic and advanced features and tells you how to use the studio monitors.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Neumann service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Neumann KH 120 D Studio Monitor with Digital I/O and KH 120 D. User manuals are also
available on the Neumann website under Pro Audio - Recording - Studio Monitors.
Question and answer discussion forum concerning user instructions and resolving problems with the Neumann KH 120 D Studio Monitor with Digital I/O and KH 120 D - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Neumann KH 120 D Studio Monitor with Digital I/O and KH 120 D
|
|
|
|
|
