PDF-MANUALS.com | User manual here!
User manual

User manual Pelco ES40E Series ES40E36-5W-X IP Positioning System ES40E365WX

Operating instructions and pdf manual for use - Pelco ES40E Series ES40E36-5W-X IP Positioning System ES40E365WX User manual, User manual Pelco ES40E Series ES40E36-5W-X IP Positioning System ES40E365WX, Pelco, ES40E, Series, ES40E36-5W-X, IP, Posi


User manual for Pelco ES40E Series ES40E36-5W-X IP Positioning System ES40E365WX

Pelco ES40E Series ES40E36-5W-X IP Positioning System ES40E365WX
  • Manufacturer: Pelco
  • Basic description and contents of package
  • Product classification: Surveillance - Surveillance Video - PAL Security Cameras
  • Safety instructions
  • Startup and operation of the pal security cameras
  • Tips for setting up your Pelco
  • Settings and expert assistance
  • Contact Pelco service
  • Troubleshooting
  • Warranty information
We recommend checking out our discussion threads on the Pelco ES40E Series ES40E36-5W-X IP Positioning System ES40E365WX, which address similar problems with connecting and setting up PAL Security Cameras Pelco.



User manual for the Pelco ES40E Series ES40E36-5W-X IP Positioning System ES40E365WX

The user manual for the Pelco ES40E Series ES40E36-5W-X IP Positioning System ES40E365WX provides necessary instructions for the proper use of the product Surveillance - Surveillance Video - PAL Security Cameras.

The ES40E Series ES40E36-5W-X IP Positioning System from Pelco features a receiver, pan/tilt, enclosure, and an Integrated Optics Package (IOP) in a single system. Esprit SE IP system allows you to control and monitor video over an IP network from virtually anywhere. This high-speed positioning system comes with a built-in 100Base-TX network interface for live streaming to any network application.
If you own a Pelco pal security cameras and have a user manual in electronic form, you can upload it to this website using the link on the right side of the screen.

You can upload and download the manual for the Pelco ES40E Series ES40E36-5W-X IP Positioning System ES40E365WX in the following formats:
  • *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Pelco ES40E Series ES40E36-5W-X IP Positioning System ES40E365WX:
Video
Video Encoding H.264 base profile, MPEG-4, and MJPEG
Video Streams Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream
Frame Rate Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7. 5, 6, 5, 4, 3, 2, 1 (dependent upon coding, resolution, and stream configuration)
JPEG: 25 ips @ 5.4 Mbps
H.264 Base Profile: 25 ips @ 1.9 Mbps
MPEG-4: 25 ips @ 2 Mbps
Available Resolutions 704 x 576
Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6, SNMP, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, and 802.1x (EAP)

Supports mixed IPv4 and IPv6 installations, but not IPv6-only deployments

Users Unicast: Up to 20 simultaneous users depending on resolution settings (2 guaranteed streams)
Multicast: Unlimited users H.264 or MPEG-4
Security Access Password protected
Software Interface Web browser view and setup, up to 16 cameras
Pelco System Integration Endura 1.5 or later (MPEG-4) or Endura 2.0 or later (H.264); Digital Sentry 7.3 IP bundle 3 or later; DX8100 Series 2.0 or later; DX4700/DX4800 Series 1.1 or later; DX4700HD/DX4800HD Series v2.0 or later; and DVR5100 version 1.5.4 or later
APIs Pelco API or ONVIF v1.02
Camera
Signal Format PAL
Scanning System Interlace/progressive selectable
Sensor 1/4" EXview HAD
Signal-to-Noise Ratio 48 dB maximum
Effective Pixels 752 x 582
Horizontal Resolution >540 TVL
Lens f/1.4, 3.3 to 119 mm
Zoom 36x optical, 12x digital
Zoom Speed 3.2 / 4.6 / 6.6 sec
Angle of View 57.2° at 0.1" (3.3 mm) wide zoom; 1.7° at 5" (119 mm) telephoto zoom
Focus Automatic with manual override
Sensitivity @90% scene reflectance; f/1.4; 27 dB gain; 35 IRE (245 mV equivalent)
Color: 0.45 lux @ 1/50 sec; 0.015 lux @ 1/1.5 sec
B/W: 0.045 lux @ 1/50 sec; 0.0015 lux @ 1/1.5 sec
Sync System AC line lock, phase adjustable using remote control, V-Sync
White Balance Automatic with manual override
Shutter Speed 1/2 to 1/30,000 sec; automatic/manual
Iris Control Automatic with manual override
Gain Control Automatic/OFF
Image Stabilization Integrated
Wide Dynamic Range 128x
Minimum System Requirements
Processor Intel Pentium 4 microprocessor, 1.6 GHz
Operating System Microsoft Windows XP, Windows Vista, Windows 7, or Mac OS X 10.4 (or later)
Memory 512 MB RAM
Network Card 100 Mb (or greater)
Monitor Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution
Web Browser Internet Explorer 7.0 (or later) or Mozilla Firefox 3.0 (or later)
Media Player Pelco Media Player or QuickTime 7.6.5 for Windows XP, Windows Vista, or QuickTime 7.6.4 for Mac OS X 10.4

This product is not compatible with QuickTime version 7.6.4 for Windows XP or Windows Vista. If you have this version installed on your PC, you will need to upgrade to QuickTime version 7.6.5

Electrical
Input Voltage 120, or 230 VAC, 50/60 Hz; switch selectable
Input Voltage Range ±10%
Power Consumption Maximum 75 VA per system
Heater Thermostatically controlled
Connections 2 power source connections made at mount location with wire splices and 1 ground wire splice
AUX 2 Open collector output with 2 sec activation; connected relay must require no more than 32 VDC and 40 mA to energize relay coil; wire length between Esprit SE and relay must be less than 100' (30 m)
Mechanical
Pan Movement 360° continuous pan rotation
Vertical Tilt Unobstructed +34° to -83°, ±2°
Variable Speed Pan: 0.1° to 40°/sec variable-speed operation, 100°/sec turbo
Tilt: 0.1° to 30°/sec variable-speed operation
Preset Positions Configurable 256
Preset Speeds Pan: 100°/sec
Tilt: 30°/sec
Camera Mounting Integrated camera sled assembly
Latches One link-lock, No. 3 stainless-steel latch; can be secured with padlock (not included)
General
Construction Die-cast, extruded and sheet aluminum; stainless-steel hardware
Finish Gray polyester powder coat
Viewing Window 0.23" (5.84 mm) thick, optically clear, polycarbonate with proprietary impact-resistant UV rated coating
Operating Temperature -50 to 122°F (-45 to 50°C) for sustained system operation or 140°F (60°C) absolute maximum; within two hours after power-up, the entire unit can de-ice and be operational from a temperature of -13°F (-25°C)
Operating Environment Will remain operational in 90 mph (145 kph) wind conditions; withstands 130 mph (209 kph)
Dimensions 13.30 x 18.77 x 7.70" (33.90 x 47.67 x 19.70 cm)
Weight 22 lb (9.9 kg)
The user manual for the Pelco ES40E Series ES40E36-5W-X IP Positioning System ES40E365WX can be downloaded in .pdf format if it did not come with your new pal security cameras, although the seller is required to supply one. It is also quite common that customers throw out the user manual with the box, or put the CD away somewhere and then can’t find it. That’s why we and other Pelco users keep a unique electronic library for Pelco pal security camerass, where you can use our link to download the user manual for the Pelco ES40E Series ES40E36-5W-X IP Positioning System ES40E365WX.

The user manual lists all of the functions of the Pelco ES40E Series ES40E36-5W-X IP Positioning System ES40E365WX, all the basic and advanced features and tells you how to use the pal security cameras. The manual also provides troubleshooting for common problems. Even greater detail is provided by the service manual, which is not typically shipped with the product, but which can often be downloaded from Pelco service.

If you want to help expand our database, you can upload a link to this website to download a user manual or service manual, ideally in .pdf format. These pages are created by you – users of the Pelco ES40E Series ES40E36-5W-X IP Positioning System ES40E365WX. User manuals are also available on the Pelco website under Surveillance - Surveillance Video - PAL Security Cameras.



Discussion Question and answer discussion forum concerning user instructions and resolving problems with the Pelco ES40E Series ES40E36-5W-X IP Positioning System ES40E365WX - no comments have been made yet - be the first to add a comment

Post new comment/question/response regarding the Pelco ES40E Series ES40E36-5W-X IP Positioning System ES40E365WX

Fields marked with * must be filled out.
Your name *:
E-mail :
Subject *:
Message text *:
Enter the code *:
(spam block)
"manual"
If you would like to receive a response to your comment, don’t forget to include your e-mail address. Your e-mail will not be displayed or otherwise used in any way.

 

Can't find what you're looking for? Try Google Search!



Current discussions
Most recently discussed products:

Manual MU118 - Rolls MU118 Digital Multimeter MU118
Posted by: Benito Camela Vergara
2024-04-19 17:10:17

Manden el manual de servicio y el de usuario...
Ripple after runing - Drytac JM55 Force JetMounter Electric Laminator JM55-FORCE
Posted by: Project Printed
2024-04-19 16:06:58

The laminate continues to ripple after running. Can’t we to do long runs without the laminate rippling and causing damage to print. ...
Sigma manual - Sigma 70-300mm f/4-5.6 APO DG Macro Lens for Nikon AF-D 5A8306
Posted by: Ash
2024-04-17 16:17:29

Do you have a manual for the sigma 70-300 lens ass suggested on this page...
Please, send me the user manual - Ibanez M510E A-Style Acoustic/Electric Mandolin M510BS
Posted by: Jaroslav Bodnar
2024-04-15 15:18:12

Please, send me the user manual for Ibanez M510E-BS Mandolin in PDF. Thak You!...
Vortex 8x42 HD Talon binocular Manual - Vortex Talon HD 8x42 Roof Prism Binocular TLN-4208-HD
Posted by: Pierre Gagnon
2024-04-12 23:06:37

Would like your PDF manual. Thanks for this convenience. Fantastic binocular....

Uploaded instruction manuals
Upload a link to an instruction manual for a depicted product here:

Link format "http://www.link2manual.com/manual.pdf"

Enter the code: "manual"






PDF-MANUALS.com - Community administered database of instructions for use and PDF User manual
sitemap.txt alx