|
User manual for Pelco POE1XT Single-Port PoE Gigabit Extender POE1XT
- Manufacturer: Pelco
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Wired Networking - Ethernet Extenders
- Safety instructions
- Startup and operation of the ethernet extenders
- Tips for setting up your Pelco
- Settings and expert assistance
- Contact Pelco service
- Troubleshooting
- Warranty information
- Price: 195 USD
|
We recommend checking out our discussion threads on the Pelco POE1XT Single-Port PoE Gigabit Extender POE1XT,
which address similar problems with connecting and setting up Ethernet Extenders Pelco.
|
User manual for the Pelco POE1XT Single-Port PoE Gigabit Extender POE1XT
The user manual for the Pelco POE1XT Single-Port PoE Gigabit Extender POE1XT provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Wired Networking - Ethernet Extenders.
The Pelco POE1XT Single-Port PoE Gigabit Extender is designed to meet the demanding data rate and power requirements of IP cameras with high-quality streaming video capabilities. It provides a voltage boost to PoE, adding another 328' (100m), to extend Ethernet to 656.2' (200m). The Gigabit extender accepts power from an IEEE802.3at source and is 25K signature resistance detection IEEE802.3at input compliant.
|
If you own a Pelco ethernet extenders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Pelco POE1XT Single-Port PoE Gigabit Extender POE1XT in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Pelco POE1XT Single-Port PoE Gigabit Extender POE1XT:
| Source | Receives power from an IEEE802.3at source | | Input Detection | 25k detection IEEE802.3at compliance | | Voltage Range | DC Input: 45 to 57 VDC | | Input Current | DC: 1.0 A at 45 VDC and maximum load
0.8 A at 57 VDC and maximum load | | Total Output Power | 802.3af: 19 W with 33.6 W PoE input | | DC Output Voltage | 54 V minimum, 56 V typical, 57 V maximum | | Output Current | 10 mA minimum, 330 mA maximum | | Ripple and Noise | 250 mV maximum | | Output Detection | 25k detection IEEE802.3af compliance | | Efficiency | 75% minimum at maximum load | | Short Circuit Protection | Outputs equipped with short circuit protection; the output can be shorted permanently without damage | | Over Current Protection | 450 mA maximum for PoE class 0 to 3 detection on output | | Input/Output | RJ45 | | Input Connections | GND: Pins 1,2 7,8
+VIN: Pins 3,6 4,5 | | Output Connections | GND: Pins 1,2
+VIN: Pins 3,6 | | Power Consumption | 5 W maximum | | Operating Temperature | Megabit Data Rates at 10 /100 Mbps: 32 to 131°F (0 to 55°C)
Gigabit Data Rates: 32 to 104°F (0 to 40°C) | | Storage Temperature | -4 to 149°F (25 to 65°C) | | Maximum Humidity Gradient | 5 to 90% | | Immunity | ESD: EN61000-4-2, level 3
RS: EN61000-4-3, level 3
Surge: EN61000-4-5, level 2 | | Isolation | Hi-Pot: 2,121 VDC for 1 minute, 10 mA | | Insulation Resistance | Input to Ground: >10 MOhms, 500 VDC
Output to Ground: >10 MOhms, 500 VDC | | Certifications | CE, EN55022 class A
FCC, part 15, class A | | Dimensions (WxHxD) | 5.91 x 1.26 x 2.36" (150 x 32 x 60 mm) | |
The user manual for the Pelco POE1XT Single-Port PoE Gigabit Extender POE1XT can be downloaded in .pdf
format if it did not come with your new ethernet extenders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Pelco users keep a unique electronic library
for Pelco ethernet extenderss,
where you can use our link to download the user manual for the Pelco POE1XT Single-Port PoE Gigabit Extender POE1XT.
The user manual lists all of the functions of the Pelco POE1XT Single-Port PoE Gigabit Extender POE1XT,
all the basic and advanced features and tells you how to use the ethernet extenders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Pelco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Pelco POE1XT Single-Port PoE Gigabit Extender POE1XT. User manuals are also
available on the Pelco website under Surveillance - Surveillance Video - Wired Networking - Ethernet Extenders.
Question and answer discussion forum concerning user instructions and resolving problems with the Pelco POE1XT Single-Port PoE Gigabit Extender POE1XT - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Pelco POE1XT Single-Port PoE Gigabit Extender POE1XT
|
|
|
|
|
