|
User manual for Pelco POE20U High-power Single-port Injector POE20U560G
- Manufacturer: Pelco
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Wired Networking - Power over Ethernet (PoE)
- Safety instructions
- Startup and operation of the power over ethernet (poe)
- Tips for setting up your Pelco
- Settings and expert assistance
- Contact Pelco service
- Troubleshooting
- Warranty information
- Price: 87 USD
|
We recommend checking out our discussion threads on the Pelco POE20U High-power Single-port Injector POE20U560G,
which address similar problems with connecting and setting up Power over Ethernet (PoE) Pelco.
|
User manual for the Pelco POE20U High-power Single-port Injector POE20U560G
The user manual for the Pelco POE20U High-power Single-port Injector POE20U560G provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Wired Networking - Power over Ethernet (PoE).
The Pelco POE20U High-power Single-port Injector with high-quality streaming video capabilities, meets the high data rate and power requirements of IP cameras. The injector provides a total output power of 19.6W, and meets the IEEE 802.3af standard for detection, connection, disconnection, and fault protection. The unit is compatible with 10/100Base-T systems and systems up to 1000 Mbps.
|
If you own a Pelco power over ethernet (poe) and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Pelco POE20U High-power Single-port Injector POE20U560G in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Pelco POE20U High-power Single-port Injector POE20U560G:
| Electrical | Input Voltage: 90-264 VAC
Input Voltage Rating: 100-240 VAC
AC Input Current: 0.5 A (RMS) maximum for 90 VAC / 0.35 A (RMS) maximum for 240 VAC
Leakage Current: 0.25 mA maximum at 254 VAC, 60 Hz
AC Input Frequency 47-63 Hz
AC Inrush Current: 15 A (RMS) maximum for 115 VAC / 20 A (RMS) maximum for 230 VAC
Total Output Power: 19.6 W
Efficiency: 65% (typical) at maximum load; 120 VAC, 60 Hz
Hold-up Time: 16 milliseconds minimum; 120 VAC and maximum load
Transient O/P Voltage Protection: 60 V maximum at switch; on and off at any AC line phase
Over Voltage/Current, Short Circuit Protection: Outputs equipped with short circuit protection and overload protection according to 802.3af specification; the output can be shorted permanently without damage
Input Connectors: IEC320 inlet 3-pin | | Front Panel | Input Power: Green Fault Indicator: Red Valid 802.3af Connection Load: Green | | Environmental | Operating Temperature: 32 to 104 °F (0 to 40 °C) Storage Temperature: -13 to 149 °F (-25 to 65 °C) Maximum Humidity Gradient: 5% to 90% | | Package Weight | 1.3 lb | | Box Dimensions (LxWxH) | 9.685 x 6.142 x 3.307" | |
The user manual for the Pelco POE20U High-power Single-port Injector POE20U560G can be downloaded in .pdf
format if it did not come with your new power over ethernet (poe), although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Pelco users keep a unique electronic library
for Pelco power over ethernet (poe)s,
where you can use our link to download the user manual for the Pelco POE20U High-power Single-port Injector POE20U560G.
The user manual lists all of the functions of the Pelco POE20U High-power Single-port Injector POE20U560G,
all the basic and advanced features and tells you how to use the power over ethernet (poe).
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Pelco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Pelco POE20U High-power Single-port Injector POE20U560G. User manuals are also
available on the Pelco website under Surveillance - Surveillance Video - Wired Networking - Power over Ethernet (PoE).
Question and answer discussion forum concerning user instructions and resolving problems with the Pelco POE20U High-power Single-port Injector POE20U560G - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Pelco POE20U High-power Single-port Injector POE20U560G
|
|
|
|
|
