User manual Pelco Sarix TI ESTI350-2W Thermal IP Positioning ESTI3502W
Operating instructions and pdf manual for use - Pelco Sarix TI ESTI350-2W Thermal IP Positioning ESTI3502W User manual, User manual Pelco Sarix TI ESTI350-2W Thermal IP Positioning ESTI3502W, Pelco, Sarix, TI, ESTI350-2W, Thermal, IP, Positioning,
User manual for Pelco Sarix TI ESTI350-2W Thermal IP Positioning ESTI3502W
Manufacturer: Pelco
Basic description and contents of package
Product classification: Surveillance - Surveillance Video - Wired IP Cameras
Safety instructions
Startup and operation of the wired ip cameras
Tips for setting up your Pelco
Settings and expert assistance
Contact Pelco service
Troubleshooting
Warranty information
Price: 16 USD
We recommend checking out our discussion threads on the Pelco Sarix TI ESTI350-2W Thermal IP Positioning ESTI3502W,
which address similar problems with connecting and setting up Wired IP Cameras Pelco.
User manual for the Pelco Sarix TI ESTI350-2W Thermal IP Positioning ESTI3502W
The user manual for the Pelco Sarix TI ESTI350-2W Thermal IP Positioning ESTI3502W provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Wired IP Cameras.
The 24VAC Sarix TI ESTI350-2W Thermal IP Positioning System from Pelco (NTSC) is an advanced thermal imaging pan/tilt system designed for easy integration into any new or existing video security application. The system is designed to provide detection, recognition, and identification of people and vehicles in any lighting condition, including complete darkness. This system features IP or analog outputs in the same package and an integrated environmentally protected, IP66-rated enclosure with Esprit pan/tilt positioner, which can be controlled using IP or analog systems that use Coaxitron or RS-422 Pelco D and Pelco P protocols. Additionally, when used in an IP system, this system features a full suite of designed-for-thermal analytics.
If you own a Pelco wired ip cameras and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Pelco Sarix TI ESTI350-2W Thermal IP Positioning ESTI3502W in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Pelco Sarix TI ESTI350-2W Thermal IP Positioning ESTI3502W:
Internal shutter (offset only), 0.3 sec video freeze during shutter
Temporal NETD
50 mK at f/1.0
Display Formats
White hot, black hot, and rainbow
Lens
50 mm
F-Number (f)
1.7
Field of View (H x V x D)
11 x 8 x 14°
Near Focus
Distance: 49.2' (15.0 m)
Video Encoding
H.264 high, main, or base profiles and MJPEG
Video Streams
Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream
Frame Rate
Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7.5, 6, 5, 4, 3, 2.5, 2, 1 (dependent upon stream configuration)
Available Resolutions
For 384 x 288 Resolution, 4:3 Aspect Ratio MJPEG: Maximum 30 ips @ 1.71 Mb/s recommended bit rate H.264 High Profile: Maximum 30 ips @ 0.63 Mb/s recommended bit rate
For 320 x 240 Resolution, 4:3 Aspect Ratio MJPEG: Maximum 30 ips @ 1.17 Mb/s recommended bit rate H.264 High Profile: Maximum 30 ips @ 0.49 Mb/s recommended bit rate
For 320 x 176 Resolution, 16:9 Aspect Ratio MJPEG: Maximum 30 ips @ 0.88 Mb/s recommended bit rate H.264 High Profile: : Maximum 30 ips @ 0.34 Mb/s recommended bit rate
Unicast: Up to 20 simultaneous users depending on resolution settings (2 guaranteed streams) Multicast: Unlimited users H.264
Security Access
Password protected
Software Interface
Web browser view and setup
System Integration
Endura 2.0 (or later) Digital Sentry 7.3 (or later)
API Supported
Pelco API or ONVIF v1.02 (open)
Port
Video/Coaxitron: 75 Ω, unbalanced
Video Modes
NTSC
Video Level
1 Vpp
Ethernet Port
Inline RJ-45 for 100Base-TX, auto MDI/MDI-X
Ethernet Cabling
CAT5 or better for 100Base-TX (required)
Input Power
24 VAC, 50/60 Hz Range: 15 to -20%
Power Consumption
3.87 A, 102.2 VA (100 W) 24 VAC Fuse: 8 A, slow-blow
Heater
Thermostat controlled
Local Storage
microSD
Alarm Inputs
N.O. switch, N.C. switch, or 1 kΩ; supervised
Relay Output
Mechanical Voltage: 60 VDC, 125 VAC Current: 1 A Power: 62.5 VA, 30 W
Solid-State Voltage: 60 V Current: 600 mA
Audio
Input: UTP 600 Ω mono, 12 VDC power source, line level/external microphone input, 1 Vpp maximum signal level Compression: G.711 PCM, 64 kb/s Serial Control Port: 4-wire, RS-422/RS-485 (Pelco D or Pelco P) Serial Control Cabling Type: UTP
Pan Movement
360° continuous pan rotation
Vertical Tilt
33 to -79° unobstructed from horizontal
Variable Speed
Pan: 0.5 to 40°/sec, 100°/sec turbo for analog control; 0.1 to 100°/sec for IP control (assumes maximum operating capacity) Tilt: 0.5 to 20°/sec for analog control; 0.1 to 30°/sec for IP control (assumes maximum operating capacity)
Preset Speeds
Pan: 100°/sec Tilt: 30°/sec
Assumes maximum operating capacity.
Latches
2 captive Torx screws
Performance
Detection, Recognition, & Identification of a Human Target Detection: 3,608.92' (1,200.00 m) Recognition: 885.00' (270.00 m) Identification: 426.00' (130.00 m) Analytics Detection: 3,008.00 (917.00 m) Analytics Recognition: 738' (225.00 m)
Detection, Recognition, & Identification of a Vehicle Target Detection: 8530.18' (2,600.90 m) Recognition: 2,298' (700 m) Identification: 1,149' (350.00 m) Analytics Detection: 6889.76' (2,100.00 m) Analytics Recognition: 3937.01' (1,200.00 m)
Pixels on target assumed as 1.5 (detection), 6 (recognition), & 12 pixels (identification); size of human target assumed as 5.9x1.6' (HxV); size of vehicle target is assumed to be 7.6x7.6' (HxV)
Mount
Wall
Construction
Aluminum
Environment
Indoor/outdoor
Temperature
Operating: -40 to 122°F (-40 to 50°C) Storage: -40 to 140°F (-40 to 60°C)
Dimensions (H x W)
23.65 x 7.76" (600.70 x 197.10 mm)
Weight
26.5 lb (12.0 kg)
The user manual for the Pelco Sarix TI ESTI350-2W Thermal IP Positioning ESTI3502W can be downloaded in .pdf
format if it did not come with your new wired ip cameras, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Pelco users keep a unique electronic library
for Pelco wired ip camerass,
where you can use our link to download the user manual for the Pelco Sarix TI ESTI350-2W Thermal IP Positioning ESTI3502W.
The user manual lists all of the functions of the Pelco Sarix TI ESTI350-2W Thermal IP Positioning ESTI3502W,
all the basic and advanced features and tells you how to use the wired ip cameras.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Pelco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Pelco Sarix TI ESTI350-2W Thermal IP Positioning ESTI3502W. User manuals are also
available on the Pelco website under Surveillance - Surveillance Video - Wired IP Cameras.
Question and answer discussion forum concerning user instructions and resolving problems with the Pelco Sarix TI ESTI350-2W Thermal IP Positioning ESTI3502W - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17
Question and answer discussion forum concerning user instructions and resolving problems with the Pelco Sarix TI ESTI350-2W Thermal IP Positioning ESTI3502W - no comments have been made yet - be the first to add a comment