|
User manual for QSC CX602V Two-Channel 70V Power Amplifier CX602V
- Manufacturer: QSC
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - 70-Volt Amplifiers
- Safety instructions
- Startup and operation of the 70-volt amplifiers
- Tips for setting up your QSC
- Settings and expert assistance
- Contact QSC service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the QSC CX602V Two-Channel 70V Power Amplifier CX602V,
which address similar problems with connecting and setting up 70-Volt Amplifiers QSC.
|
User manual for the QSC CX602V Two-Channel 70V Power Amplifier CX602V
The user manual for the QSC CX602V Two-Channel 70V Power Amplifier CX602V provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - 70-Volt Amplifiers.
The QSC RMX1450a Low-Z Power Amplifier is designed to meet the needs of sound contractors. It features PowerLight technology with specific features to meet the requirements of fixed installations. High output power, versatile loading options, high thermal capacity and proven reliability, make this amp a suitable solution to any permanently installed sound system.
|
If you own a QSC 70-volt amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the QSC CX602V Two-Channel 70V Power Amplifier CX602V in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the QSC CX602V Two-Channel 70V Power Amplifier CX602V:
Power Rating | Stereo mode (both channels driven) 8 Ω FTC 20 to 20,000 Hz at 0.05% THD: 550 W 70V, 20 Hz-20 kHz, 0.05% THD: 400 W 70 V, 1 kHz, 0.05% THD: 440 W 70 V, 1 kHz, 1% THD: 600 W Bridged, mono mode: 16Ω, 20 Hz-20 kHz, 0.1% THD:1100 W 140 V, 20 Hz-20 kHz, 0.05% THD:800 W 140 V, 1 kHz, 0.05% THD:880 W 140 V, 1 kHz, 1% THD:1200 W Noise, 20 Hz-20 kHz:-106 dB Input Sensitivity @ 8 ohms: 1.26 V RMS Maximum Voltage Gain: 35 dB Output Circuitry Class: AB+B | Signal-to-Noise Ratio | > -100 dB | Distortion | SMPTE-IM: < 0.02% | Frequency Response | 20 Hz to 20 kHz, ±0.2 dB | Damping Factor | Greater than 500 | Input Impedance | 6 kΩ unbalanced, 12 kΩ balanced | Input Clipping Level | 10 V RMS(+22 dBu) | Cooling | Variable-speed fan, rear-to-front air flow | Connectors | Input: 3-pin XLR & 3-pin detachable terminal blocks (1 each per channel)>BR /> Output: Safety-shrouded barrier strip | Amplifier Protection | Full short circuit, open circuit, thermal, ultrasonic, and RF protection. Stable into reactive or mismatched loads. | Overload Protection | On/off muting, DC-fault power supply shutdown | Thermal | Losses: 70 V + 70 V Idle 165 BTU/hr, 40 kcal/hr 1/8 Power Pink Noise 1785 BTU/hr, 450 kcal/hr 1/3 Power Pink Noise 2260 BTU/hr, 570 kcal/hr Full Power 2055 BTU/hr, 520 kcal/hr | Circuit Type | Class AB | Power Consumption | 8.7 A @ 1/8 power pink noise at 4Ω 1/3 of full power, pink noise (typical of program material with severe clipping) @ 13.0 A | Power Requirements | 100, 120, 230 VAC at 50 to 60 Hz (factory configured) | Dimensions (H x W x D) | 3.5 x 19.0 x 14" (89.0 x 482 x 356 mm) 2U | Weight | 21 lb (9.5 kg) | Package Weight | 27.0 lb | Box Dimensions (LxWxH) | 24.0 x 18.5 x 6.0" | |
The user manual for the QSC CX602V Two-Channel 70V Power Amplifier CX602V can be downloaded in .pdf
format if it did not come with your new 70-volt amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other QSC users keep a unique electronic library
for QSC 70-volt amplifierss,
where you can use our link to download the user manual for the QSC CX602V Two-Channel 70V Power Amplifier CX602V.
The user manual lists all of the functions of the QSC CX602V Two-Channel 70V Power Amplifier CX602V,
all the basic and advanced features and tells you how to use the 70-volt amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from QSC service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the QSC CX602V Two-Channel 70V Power Amplifier CX602V. User manuals are also
available on the QSC website under Pro Audio - Installation Sound - 70-Volt Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the QSC CX602V Two-Channel 70V Power Amplifier CX602V
Post new comment to QSC CX602V Two-Channel 70V Power Amplifier CX602V
Subject: Cx602v | Date: 17.11.2022 00:12:46 | Author: Bonnie Scott | Change channel | Reply |
Post new comment/question/response regarding the QSC CX602V Two-Channel 70V Power Amplifier CX602V
|
|
|
|
|