User manual Radial Engineering Elevator Multi-Level Booster R800 7225
Operating instructions and pdf manual for use - Radial Engineering Elevator Multi-Level Booster R800 7225 User manual, User manual Radial Engineering Elevator Multi-Level Booster R800 7225, Radial, Engineering, Elevator, Multi-Level, Booster, R800,
User manual for Radial Engineering Elevator Multi-Level Booster R800 7225
Manufacturer: Radial Engineering
Basic description and contents of package
Product classification: Pro Audio - Musical Instruments - Effects Pedals
Safety instructions
Startup and operation of the effects pedals
Tips for setting up your Radial Engineering
Settings and expert assistance
Contact Radial Engineering service
Troubleshooting
Warranty information
Price: 170 USD
We recommend checking out our discussion threads on the Radial Engineering Elevator Multi-Level Booster R800 7225,
which address similar problems with connecting and setting up Effects Pedals Radial Engineering.
User manual for the Radial Engineering Elevator Multi-Level Booster R800 7225
The user manual for the Radial Engineering Elevator Multi-Level Booster R800 7225 provides
necessary instructions for the proper use of the product Pro Audio - Musical Instruments - Effects Pedals.
The Elevator Multi-Level Booster from Radial Engineering is a multi-level power booster and buffer which gives you the power to customize the sound of your guitar, amplifier, and pedal chain. The design begins with a 100% discrete class-A signal path that is void of integrated circuits (ICs). This eliminates zero-cross distortion, a problem which tends to cause other boosters to sound harsh.
On the ground floor (Level-1), a selector switch allows you to set the Elevator to true bypass for a direct feed to the amp when the power booster is out of the circuit. Level-2 lets you activate a unity gain buffer that will drive your guitar signal to 50' without noise. This eliminates problems such as tone loss due to cables, and popping when switching with high-gain amps. The Level-3 Drag Control is a load correction circuit which replicates the 'tone and feel' of playing with your guitar connected directly to your amp. Level-4 is a 'baseline' power booster that drives the front end of the amp for more crunch and bite. This recessed 'set & forget' control is particularly useful when using vintage amps that produce less gain. Level-5 is a clean power booster that is activated using the footswitch and delivers up to 18 dB of pure gain for soloing. Level-6 is a three-position mid boost switch that lets you increase the mid range content for added sustain.
The compact enclosure fits nicely on any pedalboard and is powered using a standard Boss-style 9 VDC power supply. A sturdy footswitch controls the internal gold-sealed military-grade relay for maximum durability, while the solid 14-gauge steel outer casing protects the sensitive internal electronics and rules out the possibility of accidentally damaging the circuit board.
If you own a Radial Engineering effects pedals and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Radial Engineering Elevator Multi-Level Booster R800 7225 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Radial Engineering Elevator Multi-Level Booster R800 7225:
Specifications
Audio Circuit Type
100% Discrete class-A
Frequency Response
20 Hz to 20 kHz
Total Harmonic Distortion
0.02%
Dynamic Range
>100 dB
Input Impedance
PZB Off: Variable 22 kOhms to 1 MOhms
Maximum Input
+4 dBu
Gain
Drive Preset Mode: Unity to +18 dB Boost: Unity to +18 dB
Output Clip Level
+10 dBu
Output Impedance
PZB On: 1000 ohms
Equivalent Input Noise
-100 dBu
Intermodulation Distortion
0.02%
Phase Deviation
< 6° at 100 Hz
Power Requirements
9 VDC Adapter / 50 mA
Construction
14-gauge steel chassis & outer shell
Finish
Durable powder coat
Dimensions
4.7 x 3.5 x 1.9" (11.9 x 8.9 x 4.9 cm)
Weight
1.25 lb (0.57 kg)
The user manual for the Radial Engineering Elevator Multi-Level Booster R800 7225 can be downloaded in .pdf
format if it did not come with your new effects pedals, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Radial Engineering users keep a unique electronic library
for Radial Engineering effects pedalss,
where you can use our link to download the user manual for the Radial Engineering Elevator Multi-Level Booster R800 7225.
The user manual lists all of the functions of the Radial Engineering Elevator Multi-Level Booster R800 7225,
all the basic and advanced features and tells you how to use the effects pedals.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Radial Engineering service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Radial Engineering Elevator Multi-Level Booster R800 7225. User manuals are also
available on the Radial Engineering website under Pro Audio - Musical Instruments - Effects Pedals.
Question and answer discussion forum concerning user instructions and resolving problems with the Radial Engineering Elevator Multi-Level Booster R800 7225 - no comments have been made yet - be the first to add a comment
Question and answer discussion forum concerning user instructions and resolving problems with the Radial Engineering Elevator Multi-Level Booster R800 7225 - no comments have been made yet - be the first to add a comment