|
User manual for Radial Engineering Firefly Single-Channel Active Tube R800 2020
- Manufacturer: Radial Engineering
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Direct Boxes
- Safety instructions
- Startup and operation of the direct boxes
- Tips for setting up your Radial Engineering
- Settings and expert assistance
- Contact Radial Engineering service
- Troubleshooting
- Warranty information
- Price: 600 USD
|
We recommend checking out our discussion threads on the Radial Engineering Firefly Single-Channel Active Tube R800 2020,
which address similar problems with connecting and setting up Direct Boxes Radial Engineering.
|
User manual for the Radial Engineering Firefly Single-Channel Active Tube R800 2020
The user manual for the Radial Engineering Firefly Single-Channel Active Tube R800 2020 provides
necessary instructions for the proper use of the product Pro Audio - Recording - Direct Boxes.
The Firefly from Radial Engineering is a single-channel active direct box that features a Class-A front end, and a 12AX7 tube stage to add warmth. A variable low-cut knob enables you to optimize the sound of a variety of instruments, such as electric and acoustic basses, electric and acoustic guitars, mandolins, viola, and more. The Firefly features two 1/4" Hi-Z inputs with independent Trim knobs, and it's possible to connect both active and passive instruments. A "Drag Control" terminal gives you the ability to adjust the load correction so you can get the best tone from a magnetic pickups.
|
If you own a Radial Engineering direct boxes and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Radial Engineering Firefly Single-Channel Active Tube R800 2020 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Radial Engineering Firefly Single-Channel Active Tube R800 2020:
Type | Audio circuit type: 100% discrete class-A FET with tube drive | Input Connections | 2x Hi-Z 1/4" connectors, selectable A or B | Pad | Yes, variable input pad | Output Connectors | 1x balanced XLR 1x 1/4" Hi-Z buffered, pre or post tube & effects insert loop | Inserts | Yes, 1/4" TRS insert loop, wired tip-send, ring-return | Polarity | 180° | Ground | Ground Lift: Pin-1 at the XLR | Gain | 20 dB (Maximum) | Signal to Noise Ratio | 85 dB @ +4 dB | Dynamic Range | >100 dB | Controls | 2x Trim Knobs 1x A/B Select Button 1x Drag On Button 1x Low Cut Knob 1x Level Knob 1x Load Adjust Terminal 1x Recessed Polarity Switch 1x Recessed Ground Lift Switch 1x Recessed Pre Switch | Mute | Yes, on all outputs except Tuner (requires separately available JR2 footswitch) | Low Cut Filters | Variable from 5 Hz to 500 Hz at -3 dB | Drag Control | Yes, load correction for magnetic pickups | Frequency Response | 20 Hz to 20 kHz | Noise Floor | -98 dB at unity gain | Equivalent Input Noise | -101 dB | Maximum Input | Variable from -12 dB to +20 dB | Total Harmonic Distortion | 0.15% from 20 Hz to 20 kHz | Intermodulation Distortion | 0.3% | Input Impedance | Drag On: Variable 22k to 500k Drag Off: 3.9 meg-Ω | Output Impedance | 150Ω (nominal) | Power | 5-pin XLR, +/-16V & 48V, 1600mA | Specialties | 12AX7 Tube drive circuit | Dimensions | Without handle: 5.75 x 8.25 x 1.75" (146 x 210 x 45 mm) With handle: 5.75 x 8.25 x 2.75" (146 x 210 x 70 mm) | Weight | 3.95 lb (1.80 kg) | Package Weight | 6.65 lb | Box Dimensions (LxWxH) | 13.6 x 8.8 x 4.7" | |
The user manual for the Radial Engineering Firefly Single-Channel Active Tube R800 2020 can be downloaded in .pdf
format if it did not come with your new direct boxes, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Radial Engineering users keep a unique electronic library
for Radial Engineering direct boxess,
where you can use our link to download the user manual for the Radial Engineering Firefly Single-Channel Active Tube R800 2020.
The user manual lists all of the functions of the Radial Engineering Firefly Single-Channel Active Tube R800 2020,
all the basic and advanced features and tells you how to use the direct boxes.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Radial Engineering service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Radial Engineering Firefly Single-Channel Active Tube R800 2020. User manuals are also
available on the Radial Engineering website under Pro Audio - Recording - Direct Boxes.
Question and answer discussion forum concerning user instructions and resolving problems with the Radial Engineering Firefly Single-Channel Active Tube R800 2020 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Radial Engineering Firefly Single-Channel Active Tube R800 2020
|
|
|
|
|