|
User manual for Radial Engineering J-ISO Stereo 4 dB to -10 dB R800 1025
- Manufacturer: Radial Engineering
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Direct Boxes
- Safety instructions
- Startup and operation of the direct boxes
- Tips for setting up your Radial Engineering
- Settings and expert assistance
- Contact Radial Engineering service
- Troubleshooting
- Warranty information
- Price: 260 USD
|
We recommend checking out our discussion threads on the Radial Engineering J-ISO Stereo 4 dB to -10 dB R800 1025,
which address similar problems with connecting and setting up Direct Boxes Radial Engineering.
|
User manual for the Radial Engineering J-ISO Stereo 4 dB to -10 dB R800 1025
The user manual for the Radial Engineering J-ISO Stereo 4 dB to -10 dB R800 1025 provides
necessary instructions for the proper use of the product Pro Audio - Recording - Direct Boxes.
The J-ISO Stereo Converter with Jensen Transformers from Radial Engineering is a stereo line isolator, designed to convert a professional +4 dB line-level balanced signal to an unbalanced -10 dB consumer-level device. This enables you to take the balanced output of a mixer and feed a consumer-level recorder or audio input on a computer.
|
If you own a Radial Engineering direct boxes and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Radial Engineering J-ISO Stereo 4 dB to -10 dB R800 1025 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Radial Engineering J-ISO Stereo 4 dB to -10 dB R800 1025:
| Circuit Type | Passive, transformer based | | Number of Channels | Stereo (dual mono) | | Frequency Response | 20 Hz to 20 kHz (+0 dB/ -1.5 dB) | | Dynamic Range | 130 dB | | Maximum Input | +20 dBu @ 1 kHz/ 1% THD+N | | THD + Noise | 0.001% @ 1 kHz | | Deviation | 0.5° @ 100 Hz; 1° @ 20 Hz | | CMRR | -58 dB | | Input Impedance | 1.3 kΩ, unbalanced | | Output Impedance | 520 Ω, balanced | | Transformer | Jensen JT-11-YMPC | | Features | Ground Lift: Disconnects XLR pin-1 at XLR input
XLR Configuration: AES standard (pin-2 hot) | | Connectors | Balanced XLR-F in; 1/4", RCA and 3.5 mm TRS unbalanced outputs | | Construction | 14-gauge steel chassis | | Finish | Baked enamel | | Power | Passive, no power required | | Dimensions (L x W x D) | 3.3 x 5.0 x 2.0" (83.8 x 127.0 x 50.8 mm) | | Weight | 24.8 oz (703.1 g) | | Package Weight | 2.05 lb | | Box Dimensions (LxWxH) | 6.3 x 4.2 x 3.0" | |
The user manual for the Radial Engineering J-ISO Stereo 4 dB to -10 dB R800 1025 can be downloaded in .pdf
format if it did not come with your new direct boxes, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Radial Engineering users keep a unique electronic library
for Radial Engineering direct boxess,
where you can use our link to download the user manual for the Radial Engineering J-ISO Stereo 4 dB to -10 dB R800 1025.
The user manual lists all of the functions of the Radial Engineering J-ISO Stereo 4 dB to -10 dB R800 1025,
all the basic and advanced features and tells you how to use the direct boxes.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Radial Engineering service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Radial Engineering J-ISO Stereo 4 dB to -10 dB R800 1025. User manuals are also
available on the Radial Engineering website under Pro Audio - Recording - Direct Boxes.
Question and answer discussion forum concerning user instructions and resolving problems with the Radial Engineering J-ISO Stereo 4 dB to -10 dB R800 1025 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Radial Engineering J-ISO Stereo 4 dB to -10 dB R800 1025
|
|
|
|
|
