|
User manual for Radial Engineering Tonebone Bassbone V2 Bass Preamp R800 7071
- Manufacturer: Radial Engineering
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Direct Boxes
- Safety instructions
- Startup and operation of the direct boxes
- Tips for setting up your Radial Engineering
- Settings and expert assistance
- Contact Radial Engineering service
- Troubleshooting
- Warranty information
- Price: 290 USD
|
We recommend checking out our discussion threads on the Radial Engineering Tonebone Bassbone V2 Bass Preamp R800 7071,
which address similar problems with connecting and setting up Direct Boxes Radial Engineering.
|
User manual for the Radial Engineering Tonebone Bassbone V2 Bass Preamp R800 7071
The user manual for the Radial Engineering Tonebone Bassbone V2 Bass Preamp R800 7071 provides
necessary instructions for the proper use of the product Pro Audio - Recording - Direct Boxes.
Improving on the design of the original, the Tonebone Bassbone V2 Bass Preamp and DI Box from Radial Engineering is a 2-channel preamp that allows you to connect 1 or 2 basses to a single amplifier, PA, or recording destination, and also includes a boost function and switchable effects loop. Each channel offers independent level control for matching signals, along with independent EQ to suit different basses or styles. A balanced XLR output lets you connect to a PA or recording interface, while the 1/4" amplifier out allows you to hit your amp simultaneously.
A boost/mute switch allows you to either boost your signal, or mute it entirely. The effects send can be switched on and off, and even includes a blend knob that lets you adjust your wet/dry blend, and can be applied to channel 1 or channel 2, or both. A piezo booster allows you to connect a piezo pickup with no signal loss.
|
If you own a Radial Engineering direct boxes and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Radial Engineering Tonebone Bassbone V2 Bass Preamp R800 7071 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Radial Engineering Tonebone Bassbone V2 Bass Preamp R800 7071:
Audio Circuit Type | Discrete class-A FET input with low noise ICs | Frequency Response | 20 Hz to 18 kHz | Total Harmonic Distortion | 0.05% @ -15 dBu | Intermodulation Distortion | 0.2% @ -20 dBu | Dynamic Range | 85 dB | Input Impedance | Input A: 220 kOhms Input B: 220 kOhms/10 MOhms | Output Impedance | 300 ohms @ XLR | Maximum Input | +7 dBu | Gain | Unity gain device | Gain Boost | Gain Boost Drive: 0 to 25 dB | Noise Floor | -100 dB | Equivalent Input Noise | -92 dBu at XLR | High Pass Filter | Flat, 35 Hz and 60 Hz (6 dB/Octave) | XLR Configuration | Pin 2 +, Pin 3 -, Pin 1 Ground | Ground Lift | Lifts pin-1 on the XLR | Power | +15 VDC/400 mA adapter included | Construction | 14-gauge steel | Operating Conditions | Use in dry locations only between 41 to 104°F (5 to 40°C) | Dimensions (L x W x D) | 5.5 x 4.2 x 2" (203 x 107 x 48 mm) | Weight | 2.6 lb (1157 g) | |
The user manual for the Radial Engineering Tonebone Bassbone V2 Bass Preamp R800 7071 can be downloaded in .pdf
format if it did not come with your new direct boxes, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Radial Engineering users keep a unique electronic library
for Radial Engineering direct boxess,
where you can use our link to download the user manual for the Radial Engineering Tonebone Bassbone V2 Bass Preamp R800 7071.
The user manual lists all of the functions of the Radial Engineering Tonebone Bassbone V2 Bass Preamp R800 7071,
all the basic and advanced features and tells you how to use the direct boxes.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Radial Engineering service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Radial Engineering Tonebone Bassbone V2 Bass Preamp R800 7071. User manuals are also
available on the Radial Engineering website under Pro Audio - Recording - Direct Boxes.
Question and answer discussion forum concerning user instructions and resolving problems with the Radial Engineering Tonebone Bassbone V2 Bass Preamp R800 7071 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Radial Engineering Tonebone Bassbone V2 Bass Preamp R800 7071
|
|
|
|
|