User manual Rane HAL4 Programmable DSP Audio Distribution Multiprocessor
Operating instructions and pdf manual for use - Rane HAL4 Programmable DSP Audio Distribution Multiprocessor User manual, User manual Rane HAL4 Programmable DSP Audio Distribution Multiprocessor, Rane, HAL4, Programmable, DSP, Audio, Distribution,
User manual for Rane HAL4 Programmable DSP Audio Distribution Multiprocessor
Manufacturer: Rane
Basic description and contents of package
Product classification: Pro Audio - Installation Sound - System Processors
Safety instructions
Startup and operation of the system processors
Tips for setting up your Rane
Settings and expert assistance
Contact Rane service
Troubleshooting
Warranty information
Price: 799 USD
We recommend checking out our discussion threads on the Rane HAL4 Programmable DSP Audio Distribution Multiprocessor,
which address similar problems with connecting and setting up System Processors Rane.
User manual for the Rane HAL4 Programmable DSP Audio Distribution Multiprocessor
The user manual for the Rane HAL4 Programmable DSP Audio Distribution Multiprocessor provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - System Processors.
The HAL4 Programmable DSP Audio Distribution Multiprocessor from Rane allows you to easily create a network of audio and paging zones. It has 2100 MIPS of processing power, and includes its own Halogen control software for Windows, which assists in everything from dynamic signal routing to cable testing.
The HAL4 provides two on-board analog inputs and outputs in Euroblock format. Each input supports a dynamic mic, 48V phantom mic, +4 dBu line-level, or Rane's line-plus input. The line-plus mode accepts -10 dB unbalanced left/right monoed together on the "+" and "-" ports respectively. Line-plus also connects the stereo RCA left tip to the "+" terminal, the RCA right tip to the "-" terminal, and both RCA shields to the Euroblock ground.
If you own a Rane system processors and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Rane HAL4 Programmable DSP Audio Distribution Multiprocessor in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Rane HAL4 Programmable DSP Audio Distribution Multiprocessor:
Input Impedance: 2.9 kOhms 1%, 1 kHz, each leg to ground Inter-Channel Isolation: >100 dB typical, 20 Hz to 20 kHz, unity gain, channel-to-channel CMRR: 55 dB minimum 1 kHz
Dynamic Microphone
Dynamic Mic Mode: Active balanced, microphone input mode without phantom power Gain: +30 to +50 dB typical, +30 dB (analog gain), 1 dB steps to +50 dB (digital gain) THD+N: < 0.005% typical 20 to 20k Hz, +4 dBu out, 0 dB digital gain Equivalent Input Noise -120 dBu typical, 20 to 20kHz, 150 ohm source, 30 dB gain Maximum Input: -18 dBv (125 mV RMS) typical, 1 kHz, < 0.01% THD+N Frequency Response: 20 Hz to 20 kHz, +0.0 / -0.3 dB, +4 dBu out, 100 kOhm load, Mic Input to Output
Condenser Microphone
Condenser Mic Mode: Active balanced, microphone input mode with 48V phantom power Gain: +18 to +38 dB typical, +18 dB (analog gain), 1 dB steps to +38 dB (digital gain) Phantom Power: +48 VDC, 10 mA max per input THD+N: < 0.005 % typical, 20 to 20 kHz, +4 dBu out, 0 dB digital gain Equivalent Input Noise: -110 dBu typical, 20 to 20 kHz, 150 Ω source, 18 dB gain Maximum Input: -6 dBv (500 mV RMS) typical, 1 kHz, < 0.01% THD+N Frequency Response: 20 Hz to 20 kHz, +0.0 / -0.3 dB, +4 dBu out, 100 kOhm load, mic input to output
Line+ Mode
Line+ Mode: Active summer, left ("+") and right ("-") signals summed to mono Gain: 0 to +20 dB typical, 0 dB (analog gain), 1 dB steps to +20 dB (digital gain) THD+N: < 0.007 % typical, 20 to 20 kHz, +4 dBu out, 0 dB digital gain Maximum Input: +14 dBu typical, 1 kHz, < 0.01% THD+N, each leg Frequency Response: 20 Hz to 20 kHz, +0.0 / -0.3 dB +4 dBu out, 100k Ω load, line-plus input to output Dynamic Range: (in to out) 108 dB max re +20 dBu, 20 kHz BW, A-weighted, Rs = 50 ohms
Line Mode
Line Mode: Active balanced, balanced line level input Gain: 0 dB typical, 0 dB (analog gain), 1 dB steps to +20 dB (digital gain) THD+N: < 0.005 % typical, 20 to 20 kHz, +4 dBu out, 0 dB digital gain Maximum Input: +14 dBu typical, 1 kHz, < 0.01% THD+N Frequency Response: 20 Hz to 20 kHz, +0.0 / -0.3 dB, +4 dBu out, 100 kOhm load, line input to output Dynamic Range (in to out): 108 dB maximum, re +20 dBu, 20 kHz BW, A weighted, Rs = 50 ohms
The user manual for the Rane HAL4 Programmable DSP Audio Distribution Multiprocessor can be downloaded in .pdf
format if it did not come with your new system processors, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Rane users keep a unique electronic library
for Rane system processorss,
where you can use our link to download the user manual for the Rane HAL4 Programmable DSP Audio Distribution Multiprocessor.
The user manual lists all of the functions of the Rane HAL4 Programmable DSP Audio Distribution Multiprocessor,
all the basic and advanced features and tells you how to use the system processors.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Rane service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Rane HAL4 Programmable DSP Audio Distribution Multiprocessor. User manuals are also
available on the Rane website under Pro Audio - Installation Sound - System Processors.
Question and answer discussion forum concerning user instructions and resolving problems with the Rane HAL4 Programmable DSP Audio Distribution Multiprocessor - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17
Question and answer discussion forum concerning user instructions and resolving problems with the Rane HAL4 Programmable DSP Audio Distribution Multiprocessor - no comments have been made yet - be the first to add a comment