We recommend checking out our discussion threads on the RDL DB-TPS3A Triple Pair RJ45 Sender Module (Black) DB-TPS3A,
which address similar problems with connecting and setting up Modules & Cards RDL.
User manual for the RDL DB-TPS3A Triple Pair RJ45 Sender Module (Black) DB-TPS3A
The user manual for the RDL DB-TPS3A Triple Pair RJ45 Sender Module (Black) DB-TPS3A provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Modules & Cards.
The DB-TPS3A Triple Pair RJ45 Sender Module from RDL is a three-pair audio sending module compatible with RDL Format-A twisted pair products. The DB-TPS3A features a black front-panel laminate. This module features an XLR microphone input and two RCA phono jack inputs, one for the left channel source and one for the right channel source. The unbalanced inputs are designed to receive standard -10 dBV consumer level signals. The microphone input provides 24 VDC IEC phantom voltage and accepts both dynamic and condenser microphone signals. The input signals are amplified using studio-quality pre-amplifiers optimized for normal operating levels. A rear-panel GAIN switch is provided to set the amplification of the microphone pre-amplifier. This switch is normally set by the installer for NORM (normal) gain. If consistently low microphone levels are expected, this switch may be set to the HIGH gain position. The pre-amplified microphone source is routed to pair A. The buffered left and right line-level inputs are routed to output cable pairs B and C.
The DB-TPS3A can be powered directly from a 24 VDC power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The DB-TPS3A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED. This unit is designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The DB-TPS3A model can mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes.
If you own a RDL modules & cards and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the RDL DB-TPS3A Triple Pair RJ45 Sender Module (Black) DB-TPS3A in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the RDL DB-TPS3A Triple Pair RJ45 Sender Module (Black) DB-TPS3A:
Specifications
Inputs
Microphone: 1.2 kOhms balanced with IEC 24 VDC phantom Line (left and right): 10 kOhms unbalanced
Input Connections
XLR, microphone RCA phono, Line Format A Single Pair Used: A (Mic); B (Unbalanced Line Left); C (Unbalanced Line Right)
Microphone: 100 Hz to 30 kHz (± 1 dB); integral low-cut filter -10 dB @ 30 Hz Line: 20 Hz to 50 kHz (± 0.5 dB)
THD & Noise
Microphone: < 0.1% (80 Hz to 20 kHz) Line: < 0.05% (20 Hz to 50 kHz); <0.005% (1 kHz)
Noise
Below +4 dBu Microphone: < -80 dB (Norm Gain), < -70 dB (High Gain) Line: < -95 dB
Crosstalk
Line to Line: < 90 dB (1 kHz); < 75 dB (20 Hz to 20 kHz) Line to Microphone (High Gain): < 65 dB (1 kHz), < 60 dB (20 Hz to 20 kHz) Line to Microphone (Norm Gain): < 75 dB (1 kHz), < 70 dB (20 Hz to 20 kHz)
Headroom
Above +4 dBu: > 18 dB
CMRR
Microphone: > 60 dB (HIGH Gain 50 Hz to 150 Hz), > 65 dB (NORM Gain 50 Hz to 150 Hz)
The user manual for the RDL DB-TPS3A Triple Pair RJ45 Sender Module (Black) DB-TPS3A can be downloaded in .pdf
format if it did not come with your new modules & cards, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other RDL users keep a unique electronic library
for RDL modules & cardss,
where you can use our link to download the user manual for the RDL DB-TPS3A Triple Pair RJ45 Sender Module (Black) DB-TPS3A.
The user manual lists all of the functions of the RDL DB-TPS3A Triple Pair RJ45 Sender Module (Black) DB-TPS3A,
all the basic and advanced features and tells you how to use the modules & cards.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from RDL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the RDL DB-TPS3A Triple Pair RJ45 Sender Module (Black) DB-TPS3A. User manuals are also
available on the RDL website under Pro Audio - Installation Sound - Modules & Cards.
Question and answer discussion forum concerning user instructions and resolving problems with the RDL DB-TPS3A Triple Pair RJ45 Sender Module (Black) DB-TPS3A - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17
Question and answer discussion forum concerning user instructions and resolving problems with the RDL DB-TPS3A Triple Pair RJ45 Sender Module (Black) DB-TPS3A - no comments have been made yet - be the first to add a comment