|
User manual for RDL DS-TPS1A Single Pair RJ45 Sender Module (Silver) DS-TPS1A
- Manufacturer: RDL
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - Modules & Cards
- Safety instructions
- Startup and operation of the modules & cards
- Tips for setting up your RDL
- Settings and expert assistance
- Contact RDL service
- Troubleshooting
- Warranty information
- Price: 143 USD
|
We recommend checking out our discussion threads on the RDL DS-TPS1A Single Pair RJ45 Sender Module (Silver) DS-TPS1A,
which address similar problems with connecting and setting up Modules & Cards RDL.
|
User manual for the RDL DS-TPS1A Single Pair RJ45 Sender Module (Silver) DS-TPS1A
The user manual for the RDL DS-TPS1A Single Pair RJ45 Sender Module (Silver) DS-TPS1A provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Modules & Cards.
The DS-TPS1A Single Pair RJ45 Sender Module from RDL is a single-pair audio sending module compatible with RDL Format-A twisted pair products. The DS-TPS1A is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations. The DS-TPS1A module features an XLR microphone input. The module provides IEC 24 V phantom and accepts input signals from both dynamic and condenser microphones. The input signal is amplified using a studio-quality microphone pre-amplifier optimized for normal operating levels. The rear-panel gain switch is normally set by the installer for Norm (normal) gain. If consistently low microphone levels are expected, this switch may be set to the High gain position. The pre-amplified microphone source is routed to one output cable pair selected during installation using a rear-panel switch.
This module drives only one cable pair, and therefore accepts signals and power from other mic-level or line-level Format-A senders. The DS-TPS1A module has a second RJ45 jack for these input cables. Two other single-pair senders may be chained with the DS-TPS1A, or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair: A, B, or C. The DS-TPS1A must be set to feed pair A if it is connected together with an RDL two-pair sender that feeds stereo audio on pairs B and C. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.
The DS-TPS1A can be powered directly from a 24 VDC power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The DS-TPS1A may be remotely powered through the twisted pair cable from any other module, signal distributor, or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.
|
If you own a RDL modules & cards and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the RDL DS-TPS1A Single Pair RJ45 Sender Module (Silver) DS-TPS1A in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the RDL DS-TPS1A Single Pair RJ45 Sender Module (Silver) DS-TPS1A:
| Input Level | 1.2 kOhms balanced with 24 VDC phantom (IEC 61938: 2013) | | Input Connections | XLR
Format A Single Pair Used: Switch-selectable A, B, or C Format A Output: RJ45 | | Output Level | 45 dBu Mic or +4 dBu Line Level, Switch-selectable on rear panel
RDL TP Format-A | | Output Connections | RJ45 | | Frequency Response | 100 Hz to 30 kHz (± 1 dB); integral low-cut filter -10 dB @ 30 Hz | | THD & Noise | < 0.1% (80 Hz to 20 kHz) | | Noise | Below +4 dBu: < -80 dB (NORM Gain)
< -70 dB (HIGH Gain) | | Headroom | HAbove +4 dBu: > 18 dB | | CMRR | > 60 dB (HIGH Gain 50 to 150 Hz)
> 65 dB (NORM Gain 50 to 150 Hz) | | LED Indicator | Power In, blue | | Power Connections | 2 x RJ45; Detachable terminal block | | Power Requirements | 24 VDC @ 65 mA plus connected loads | | Ambient Operating Environment | 32 to 122°F (0 to 50°C) | | Minimum Depth | Mounting Box Minimum Depth: 2.4" (6.1 cm) | | Dimensions | 1.6 x 4.11 x 1.89" (4.8 x 4.06 x 4.8 cm) | | Weight | 0.24 lb (0.11 kg) | | Package Weight | 0.25 lb | | Box Dimensions (LxWxH) | 4.625 x 3.625 x 2.125" | |
The user manual for the RDL DS-TPS1A Single Pair RJ45 Sender Module (Silver) DS-TPS1A can be downloaded in .pdf
format if it did not come with your new modules & cards, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other RDL users keep a unique electronic library
for RDL modules & cardss,
where you can use our link to download the user manual for the RDL DS-TPS1A Single Pair RJ45 Sender Module (Silver) DS-TPS1A.
The user manual lists all of the functions of the RDL DS-TPS1A Single Pair RJ45 Sender Module (Silver) DS-TPS1A,
all the basic and advanced features and tells you how to use the modules & cards.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from RDL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the RDL DS-TPS1A Single Pair RJ45 Sender Module (Silver) DS-TPS1A. User manuals are also
available on the RDL website under Pro Audio - Installation Sound - Modules & Cards.
Question and answer discussion forum concerning user instructions and resolving problems with the RDL DS-TPS1A Single Pair RJ45 Sender Module (Silver) DS-TPS1A - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the RDL DS-TPS1A Single Pair RJ45 Sender Module (Silver) DS-TPS1A
|
|
|
|
|
