|
User manual for RDL RM-MP12A - 12-Channel Audio Monitor Panel RM-MP12A
Overall Rating: 4.0
80% of respondents would recommend this to a friend.
- Manufacturer: RDL
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - Switchers & Controllers
- Safety instructions
- Startup and operation of the switchers & controllers
- Tips for setting up your RDL
- Settings and expert assistance
- Contact RDL service
- Troubleshooting
- Warranty information
- Price: 700 USD
|
We recommend checking out our discussion threads on the RDL RM-MP12A - 12-Channel Audio Monitor Panel RM-MP12A,
which address similar problems with connecting and setting up Switchers & Controllers RDL.
|
User manual for the RDL RM-MP12A - 12-Channel Audio Monitor Panel RM-MP12A
The user manual for the RDL RM-MP12A - 12-Channel Audio Monitor Panel RM-MP12A provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Switchers & Controllers.
The RDL RM-MP12A is a rack-mountable 12-channel audio monitor panel. Each of the 12 inputs can be individually calibrated for unbalanced, balanced, 8 ohm speaker, or constant voltage speaker lines. Each input has its own pushbutton, which selects that input for monitoring via the calibrated meter, internal speaker, headphone output, and/or an optional external speaker. A mix mode is also available, allowing you to mix multiple sources.
Variable intensity LEDs on each channel show audio presence and level. Room is provided on each input for labelling. A single front-panel knob is provided for adjusting the volume level of the headphone jack, internal speaker, external speaker output, and the variable line level output. With its simple, uncluttered interface, the RM-MP12A is a great choice for monitoring or mixing multiple audio sources.
|
If you own a RDL switchers & controllers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the RDL RM-MP12A - 12-Channel Audio Monitor Panel RM-MP12A in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the RDL RM-MP12A - 12-Channel Audio Monitor Panel RM-MP12A:
Inputs | 6 x 5-Pin Terminal Block Connectors (2 Channels on Each Connector, +4 dBu, 25V, 70.7V, 100V Selectable) | Input Level | -11 dBu to +9 dBu (+4 dBu Input) 25V, 70.7V, 100V (Gain Trim @ Full Counter-Clockwise) | Headroom | Greater than 18dB Above Calibrated Input Level | Gain | 0dB to 20dB (Adjustable for Speaker-Level Input) -5dB to 15dB (+4 dBu Input) | Frequency Response | 10Hz to 20kHz (+/-0.25dB) | THD + N | Less than 0.01% | Intermodulation Distortion | Less than 0.025% | Crosstalk | Less than -80dB (10Hz to 20kHz) | Residual Noise | Less than -80dB (Channel ON; Referred to +4 dBu) | Common Mode Rejection Ratio | Greater than 75 dB (50 to 120Hz) | Outputs | 150 ohms, +4 dBu Fixed Level (Balanced or Unbalanced via Plug-In Terminal Block) 150 ohms, +4 dBu Variable Level (Balanced, Controlled by Front-Panel Knob) 4.5W RMS External Speaker Connection (Use of External Speaker Disconnects Internal Speaker) 1/4" (6.3mm) Stereo Headphone Jack | Indicators | 2 x LEDs per Channel (1 for Channel Active and 1 for Audio Level) | Power Requirements | 24 to 33 VDC @ 700mA (Ground-Referenced) | Dimensions (HxWxD) | 1.75 x 19 x 5.4" (44 x 483 x 137 mm) | Weight | Not Specified by Manufacturer | Package Weight | 4.75 lb | Box Dimensions (LxWxH) | 21.0 x 6.9 x 2.4" | |
The user manual for the RDL RM-MP12A - 12-Channel Audio Monitor Panel RM-MP12A can be downloaded in .pdf
format if it did not come with your new switchers & controllers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other RDL users keep a unique electronic library
for RDL switchers & controllerss,
where you can use our link to download the user manual for the RDL RM-MP12A - 12-Channel Audio Monitor Panel RM-MP12A.
The user manual lists all of the functions of the RDL RM-MP12A - 12-Channel Audio Monitor Panel RM-MP12A,
all the basic and advanced features and tells you how to use the switchers & controllers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from RDL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the RDL RM-MP12A - 12-Channel Audio Monitor Panel RM-MP12A. User manuals are also
available on the RDL website under Pro Audio - Installation Sound - Switchers & Controllers.
Question and answer discussion forum concerning user instructions and resolving problems with the RDL RM-MP12A - 12-Channel Audio Monitor Panel RM-MP12A - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the RDL RM-MP12A - 12-Channel Audio Monitor Panel RM-MP12A
|
|
|
|
|