|
User manual for RDL ST-PA2 Stick-On 2W Utility Power Amplifier ST-PA2
- Manufacturer: RDL
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - Standard Amplifiers
- Safety instructions
- Startup and operation of the standard amplifiers
- Tips for setting up your RDL
- Settings and expert assistance
- Contact RDL service
- Troubleshooting
- Warranty information
- Price: 67 USD
|
We recommend checking out our discussion threads on the RDL ST-PA2 Stick-On 2W Utility Power Amplifier ST-PA2,
which address similar problems with connecting and setting up Standard Amplifiers RDL.
|
User manual for the RDL ST-PA2 Stick-On 2W Utility Power Amplifier ST-PA2
The user manual for the RDL ST-PA2 Stick-On 2W Utility Power Amplifier ST-PA2 provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Standard Amplifiers.
The ST-PA2 from RDL is a professional-quality utility amplifier with a single input and two outputs. All connections are made via screw terminals. The first output delivers 2W RMS of power to an 8 Ohm speaker, while the second output is designed to drive 600 Ohm transformers. This makes the unit great for music-on-hold systems, which may have either 8 or 600 Ohm inputs. Both outputs may be used simultaneously if desired.
|
If you own a RDL standard amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the RDL ST-PA2 Stick-On 2W Utility Power Amplifier ST-PA2 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the RDL ST-PA2 Stick-On 2W Utility Power Amplifier ST-PA2:
| Input Impedance | 10 kOhms, Unbalanced | | Input Level | -15dBV Minimum (For Rated Power Output)
-20dBV Minimum (For 1W RMS into 8 Ohms) | | Frequency Response | 35Hz to 30kHz (8 Ohms ±1.5dB)
20Hz to 30kHz (600 Ohms ±0.5dB) | | Total Harmonic Distortion (THD) | < 0.75%, 0.5% Typical | | Noise | < -80dB (8 Ohms @ 2W RMS)
< -70dB (600 Ohms, Referred to +4dBu) | | Outputs | 1 @ 8 Ohms, 2W RMS Maximum
1 @ 600 Ohms, +12dBu Maximum | | Power Requirements | 24 to 33VDC @ 250mA, Ground-Referenced | | Package Weight | 0.2 lb | | Box Dimensions (LxWxH) | 4.0 x 2.0 x 2.0" | |
The user manual for the RDL ST-PA2 Stick-On 2W Utility Power Amplifier ST-PA2 can be downloaded in .pdf
format if it did not come with your new standard amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other RDL users keep a unique electronic library
for RDL standard amplifierss,
where you can use our link to download the user manual for the RDL ST-PA2 Stick-On 2W Utility Power Amplifier ST-PA2.
The user manual lists all of the functions of the RDL ST-PA2 Stick-On 2W Utility Power Amplifier ST-PA2,
all the basic and advanced features and tells you how to use the standard amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from RDL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the RDL ST-PA2 Stick-On 2W Utility Power Amplifier ST-PA2. User manuals are also
available on the RDL website under Pro Audio - Installation Sound - Standard Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the RDL ST-PA2 Stick-On 2W Utility Power Amplifier ST-PA2 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the RDL ST-PA2 Stick-On 2W Utility Power Amplifier ST-PA2
|
|
|
|
|
