User manual for RDL ST-SX4 - 4-Input Audio Switcher ST-SX4
- Manufacturer: RDL
- Basic description and contents of package
- Product classification: Pro Audio - In-Line Problem Solvers - Splitters & Combiners
- Safety instructions
- Startup and operation of the splitters & combiners
- Tips for setting up your RDL
- Settings and expert assistance
- Contact RDL service
- Warranty information
- Price: 99 USD
We recommend checking out our discussion threads on the RDL ST-SX4 - 4-Input Audio Switcher ST-SX4,
which address similar problems with connecting and setting up Splitters & Combiners RDL.
User manual for the RDL ST-SX4 - 4-Input Audio Switcher ST-SX4
The user manual for the RDL ST-SX4 - 4-Input Audio Switcher ST-SX4 provides
necessary instructions for the proper use of the product Pro Audio - In-Line Problem Solvers - Splitters & Combiners.
The RDL ST-SX4 is a four-input, single-output audio switcher in RDL's "Stick-On" line of products. It will send any one of the four unbalanced audio signals to the unbalanced output, or all of the sources may be switched off. A single input terminal provides control of the unit.
The desired input is switched on when connection of a specific resistance is made between the "Ctrl" input and the ground. The required resistors are included with the ST-SX4. The unit may be controlled by the RC4-ST remote control from RDL.
If you own a RDL splitters & combiners and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the RDL ST-SX4 - 4-Input Audio Switcher ST-SX4 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the RDL ST-SX4 - 4-Input Audio Switcher ST-SX4:
| Input and Output Level || -10 dBV |
| Gain || Unity |
| Headroom || 23dB |
| THD + N || < 0.1% (Typical 0.05%) |
| Frequency Response || 15Hz to 40kHz (+/- 0.5dB) |
| Input Impedance || 100 k ohms (Unbalanced) |
| Output Impedance || < 50 ohms (Unbalanced) |
| Crosstalk || Below Noise Floor |
| Off Attenuation || > 85dB @ 1kHz |
> 80dB @ 10kHz
> 75dB @ 20kHz
| Residual Noise || < -70dB (Referred to -10dBV) |
| Control Input Resistance || 10 k ohms (Pull-up to +15 VDC) |
| Control Input || Single Terminal to be Connected to: |
None: 0 ohms (Short to Ground) 1: 2.7 k ohms 2: 6.8 k ohms 3: 22 k ohms 4: None
| Power Requirements || 24 to 33 VDC @ 40mA (Ground-Referenced) |
| Package Weight || 0.1 lb |
| Box Dimensions (LxWxH) || 4.1 x 2.1 x 2.1" |
The user manual for the RDL ST-SX4 - 4-Input Audio Switcher ST-SX4 can be downloaded in .pdf
format if it did not come with your new splitters & combiners, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other RDL users keep a unique electronic library
for RDL splitters & combinerss,
where you can use our link to download the user manual for the RDL ST-SX4 - 4-Input Audio Switcher ST-SX4.
The user manual lists all of the functions of the RDL ST-SX4 - 4-Input Audio Switcher ST-SX4,
all the basic and advanced features and tells you how to use the splitters & combiners.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from RDL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the RDL ST-SX4 - 4-Input Audio Switcher ST-SX4. User manuals are also
available on the RDL website under Pro Audio - In-Line Problem Solvers - Splitters & Combiners.
Question and answer discussion forum concerning user instructions and resolving problems with the RDL ST-SX4 - 4-Input Audio Switcher ST-SX4 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the RDL ST-SX4 - 4-Input Audio Switcher ST-SX4