|
User manual for RDL TX-LC2 Unbalanced to Balanced Line Combiner TX-LC2
- Manufacturer: RDL
- Basic description and contents of package
- Product classification: Pro Audio - In-Line Problem Solvers - Splitters & Combiners
- Safety instructions
- Startup and operation of the splitters & combiners
- Tips for setting up your RDL
- Settings and expert assistance
- Contact RDL service
- Troubleshooting
- Warranty information
- Price: 93 USD
|
We recommend checking out our discussion threads on the RDL TX-LC2 Unbalanced to Balanced Line Combiner TX-LC2,
which address similar problems with connecting and setting up Splitters & Combiners RDL.
|
User manual for the RDL TX-LC2 Unbalanced to Balanced Line Combiner TX-LC2
The user manual for the RDL TX-LC2 Unbalanced to Balanced Line Combiner TX-LC2 provides
necessary instructions for the proper use of the product Pro Audio - In-Line Problem Solvers - Splitters & Combiners.
The TX-LC2 Unbalanced to Balanced Line Combiner from RDL is a device that allows you to perform isolated mixing on (2) unbalanced line-level audio sources and feed them to a balanced or unbalanced audio line. Output from this unit is a mono mix of the stereo signal and gain of the combined signals is adjustable from unity to 14dB.
Input circuits on this unit are high-impedance, line-level, and isolated. These features allow the module to bridge an unbalanced stereo source without affecting the stereo separation. The mixing circuit on this module is an active summing amplifier.
|
If you own a RDL splitters & combiners and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the RDL TX-LC2 Unbalanced to Balanced Line Combiner TX-LC2 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the RDL TX-LC2 Unbalanced to Balanced Line Combiner TX-LC2:
| Construction | Plastic
Metal | | Finish | Black
Gray | | Input | Inputs: (2) -10dBV nominal, -22dBV minimum
Input impedance: 10KΩ bridging | | Output | 150Ω balanced, +4dBu to drive low or high-impedance balanced or unbalanced lines | | Noise | < -85dB below +4dBu (-10dBV input @ 12dB gain) | | THD + N | < 0.005% | | Frequency Response | 10Hz to 20kHz (+/- 0.25dB into bridging input)
25Hz to 20kHz (+/- 0.25dB into 600Ω) | | Gain | Unity to +14dB nominal (adjustable) | | IMD | > 0.001% | | Headroom | > 18dB | | Power | Ground-referenced, 24 to 33VDC @ 30mA | | Dimensions (HxWxD) | 1.4 x 3 x 1.2" (3.6 x 7.6 x 3cm) | | Package Weight | 0.26 lb | | Box Dimensions (LxWxH) | 4.0 x 2.0 x 2.0" | |
The user manual for the RDL TX-LC2 Unbalanced to Balanced Line Combiner TX-LC2 can be downloaded in .pdf
format if it did not come with your new splitters & combiners, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other RDL users keep a unique electronic library
for RDL splitters & combinerss,
where you can use our link to download the user manual for the RDL TX-LC2 Unbalanced to Balanced Line Combiner TX-LC2.
The user manual lists all of the functions of the RDL TX-LC2 Unbalanced to Balanced Line Combiner TX-LC2,
all the basic and advanced features and tells you how to use the splitters & combiners.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from RDL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the RDL TX-LC2 Unbalanced to Balanced Line Combiner TX-LC2. User manuals are also
available on the RDL website under Pro Audio - In-Line Problem Solvers - Splitters & Combiners.
Question and answer discussion forum concerning user instructions and resolving problems with the RDL TX-LC2 Unbalanced to Balanced Line Combiner TX-LC2 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the RDL TX-LC2 Unbalanced to Balanced Line Combiner TX-LC2
|
|
|
|
|
