|
User manual for Rupert Neve Designs Portico 5017 DI/Pre/Comp Mobile Channel 5017
- Manufacturer: Rupert Neve Designs
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Channel Strips
- Safety instructions
- Startup and operation of the channel strips
- Tips for setting up your Rupert Neve Designs
- Settings and expert assistance
- Contact Rupert Neve Designs service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Rupert Neve Designs Portico 5017 DI/Pre/Comp Mobile Channel 5017,
which address similar problems with connecting and setting up Channel Strips Rupert Neve Designs.
|
User manual for the Rupert Neve Designs Portico 5017 DI/Pre/Comp Mobile Channel 5017
The user manual for the Rupert Neve Designs Portico 5017 DI/Pre/Comp Mobile Channel 5017 provides
necessary instructions for the proper use of the product Pro Audio - Recording - Channel Strips.
The Rupert Neve Designs Portico 5017 DI/Pre/Comp Mobile Channel with Variphase Control is designed for studio recording, live recording, and live performance applications. This portable combination preamplifier and direct box is encased in a rugged chassis and features two channel operation, variphase control, silk control, single-knob compression and the ability to blend both microphone and instrument channels.
The front panel of the chassis features a 1/4" instrument input as well as a 1/4" Thru for connecting to an instrument amplifier. The instrument gain knob allows you to control the DI signal level from 0 to 30 dB and the microphone gain knob provides up to 66 dB of gain in 6 dB increments. A rear panel phantom power switch enables use with condenser microphones and a high pass filter button reduces signals below 80 Hz by 12 dB/octave to remove building rumble and other environmental noise. A phase invert button reverses the polarity of the microphone input.
The compressor features an adjustable threshold between -20 and +10 with a fixed ratio of 1:2 and an adjustable time attack and release time constant from standard to fast via an internal jumper. A second internal jumper allows the compressor to be assigned to the DI chain.
The variphase button and phase sweep knob allow you to incrementally adjust the phase angle of the two sources for aligning sources such as overhead and drum mics or the direct and amplified signals from a bass guitar and bass cabinet. The middle blend button allows you to mix the DI and Mic signals together, while the silk button adds nostalgic warmth and presence to both outputs.
The back of the unit features an XLR-3F mic input, a 1/4" mic output, a XLR-3F line ouptut, a +48V phantom power switch, a ground lift switch, and a 12 VDC power button.
|
If you own a Rupert Neve Designs channel strips and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Rupert Neve Designs Portico 5017 DI/Pre/Comp Mobile Channel 5017 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Rupert Neve Designs Portico 5017 DI/Pre/Comp Mobile Channel 5017:
| Phantom Power | +48 VDC ±1% | | Crosstalk | Measured Channel to Channel: Better than -90 dB @ 15 kHz | | Total Harmonic Distortion/Noise | At 1 kHz, +20 dBu Output: Main Output: Better than 0.001%
At 20 Hz, +20 dBu Output: Main Output: Better than 0.002%
Silk Engaged: Better than 0.2% second harmonic | | Maximum Output Level | Maximum output from 20 to 40 kHz is +23 dBu | | Noise | Measured at Main Output, unweighted, 22 Hz to 22 kHz, terminated 150 ohms. With gain at unity better than -100 dBu, with gain at 66 dB better than -62 dBu, Equivalent Input Noise better than -128 dBu, Noise Factor of 1.5 dB | | Frequency Response | Main Output, no load, -0.2 dB @ 10 Hz , -3 dB @ 160 kHz | | Dimensions (W x H x D) | 6.5 x 2.0 x 7.5" (16.5 x 5.0 x 19.0 cm) | | Weight | 5 lb (2.3 kg) | | Package Weight | 5.95 lb | | Box Dimensions (LxWxH) | 14.2 x 12.1 x 5.9" | |
The user manual for the Rupert Neve Designs Portico 5017 DI/Pre/Comp Mobile Channel 5017 can be downloaded in .pdf
format if it did not come with your new channel strips, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Rupert Neve Designs users keep a unique electronic library
for Rupert Neve Designs channel stripss,
where you can use our link to download the user manual for the Rupert Neve Designs Portico 5017 DI/Pre/Comp Mobile Channel 5017.
The user manual lists all of the functions of the Rupert Neve Designs Portico 5017 DI/Pre/Comp Mobile Channel 5017,
all the basic and advanced features and tells you how to use the channel strips.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Rupert Neve Designs service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Rupert Neve Designs Portico 5017 DI/Pre/Comp Mobile Channel 5017. User manuals are also
available on the Rupert Neve Designs website under Pro Audio - Recording - Channel Strips.
Question and answer discussion forum concerning user instructions and resolving problems with the Rupert Neve Designs Portico 5017 DI/Pre/Comp Mobile Channel 5017 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Rupert Neve Designs Portico 5017 DI/Pre/Comp Mobile Channel 5017
|
|
|
|
|
