User manual Schoeps CMC 6 Ug Microphone Amplifier Mono Set CMC641CNI SET
Operating instructions and pdf manual for use - Schoeps CMC 6 Ug Microphone Amplifier Mono Set CMC641CNI SET User manual, User manual Schoeps CMC 6 Ug Microphone Amplifier Mono Set CMC641CNI SET, Schoeps, CMC, 6, Ug, Microphone, Amplifier, Mono, Se
User manual for Schoeps CMC 6 Ug Microphone Amplifier Mono Set CMC641CNI SET
Manufacturer: Schoeps
Basic description and contents of package
Product classification: Pro Audio - Recording - Small Diaphragm Condenser
Safety instructions
Startup and operation of the small diaphragm condenser
Tips for setting up your Schoeps
Settings and expert assistance
Contact Schoeps service
Troubleshooting
Warranty information
We recommend checking out our discussion threads on the Schoeps CMC 6 Ug Microphone Amplifier Mono Set CMC641CNI SET,
which address similar problems with connecting and setting up Small Diaphragm Condenser Schoeps.
User manual for the Schoeps CMC 6 Ug Microphone Amplifier Mono Set CMC641CNI SET
The user manual for the Schoeps CMC 6 Ug Microphone Amplifier Mono Set CMC641CNI SET provides
necessary instructions for the proper use of the product Pro Audio - Recording - Small Diaphragm Condenser.
The nickel version of the CMC 6 Ug Microphone Amplifier Mono Set from SCHOEPS consists of the CMC 6 Ug microphone amplifier, an MK 41 microphone capsule, a CUT 1 filter, an SG 20 stand clamp with swivel, and a B 5 solid foam popscreen.
The CMC 6 Ug is designed for standard +48V and +12V phantom power. Its circuitry recognizes the supply voltage and adjusts itself automatically, with more current draw at +12V but otherwise comparable performance. However, the 12V mode consumes less power and might be preferred for battery-powered recording.
The CMC 6 Ug amplifier offers a low impedance, symmetrical, transformerless, direct-coupled Class A output stage with low distortion and interference.
The MK 41 microphone capsule features a highly directional hypercardioid pickup pattern. Sound arriving from off axis is attenuated even more than with a cardioid pattern which makes the pickup less susceptible to acoustic feedback. However, a loudspeaker should not be located directly along the rear axis of the microphone. Its directivity is highly independent of frequency, so that even sounds arriving off axis and reverberant sounds are registered without coloration. Consequently, even distant placement of the capsule produces a very natural sound.
The CUT 1 filter is inserted between the microphone capsule and the microphone amplifier. It attenuates by 24 dB/octave at 60 Hz to prevent infrasonic sounds such as room rumble and wind noise from being picked up by the microphone.
The CUT 1 filter also offsets proximity effect to improve speech intelligibility in reverberant rooms by means of an additional 6dB/oct rolloff at a variable frequency between 70 and 600 Hz.
The SG 20 Stand Clamp can support a microphone with a diameter of up to 21mm. The base of this mount has a 5/8"-27 NS internal thread. A threaded adapter is supplied for 3/8" and 1/2" mounting. The angle can be varied continuously in the vertical plane.
The B 5 Solid Foam Popscreen provides sufficient protection at normal speaking distances with minimal effect on sound quality for cardioid and other directional capsules, especially when speech capsules are used. With omnidirectional capsules, it may even be used outdoors in light wind.
If you own a Schoeps small diaphragm condenser and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Schoeps CMC 6 Ug Microphone Amplifier Mono Set CMC641CNI SET in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Schoeps CMC 6 Ug Microphone Amplifier Mono Set CMC641CNI SET:
Specifications
Power Voltage
12 and 48 V
Current Consumption
8 mA at 12 V 4 mA at 48 V
Impedance
25 ohms at 12 V 35 ohms at 48 V
Low Frequency Cut
20 Hz
Maximum Output Voltage
1 V
Load Impedance
600 ohms (Minimum recommended)
Dimensions (L x D)
4.56 x 0.78" (116.00 x 20.00 mm)
Weight
2.11 oz (60.00 g)
The user manual for the Schoeps CMC 6 Ug Microphone Amplifier Mono Set CMC641CNI SET can be downloaded in .pdf
format if it did not come with your new small diaphragm condenser, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Schoeps users keep a unique electronic library
for Schoeps small diaphragm condensers,
where you can use our link to download the user manual for the Schoeps CMC 6 Ug Microphone Amplifier Mono Set CMC641CNI SET.
The user manual lists all of the functions of the Schoeps CMC 6 Ug Microphone Amplifier Mono Set CMC641CNI SET,
all the basic and advanced features and tells you how to use the small diaphragm condenser.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Schoeps service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Schoeps CMC 6 Ug Microphone Amplifier Mono Set CMC641CNI SET. User manuals are also
available on the Schoeps website under Pro Audio - Recording - Small Diaphragm Condenser.
Question and answer discussion forum concerning user instructions and resolving problems with the Schoeps CMC 6 Ug Microphone Amplifier Mono Set CMC641CNI SET - no comments have been made yet - be the first to add a comment
Can you directly connect the ea600 amp to the E110A active subwoofer?...Manual MU118 - Rolls MU118 Digital Multimeter MU118 Posted by: Benito Camela Vergara 2024-04-19 17:10:17
Question and answer discussion forum concerning user instructions and resolving problems with the Schoeps CMC 6 Ug Microphone Amplifier Mono Set CMC641CNI SET - no comments have been made yet - be the first to add a comment