User manual for Schoeps CMIT WS4 SET - CMIT5U Shotgun Microphone CMIT WS4 SET
Overall Rating: 5.0
100% of respondents would recommend this to a friend.
- Manufacturer: Schoeps
- Basic description and contents of package
- Product classification: Pro Audio - Location Sound - Shotgun
- Safety instructions
- Startup and operation of the shotgun
- Tips for setting up your Schoeps
- Settings and expert assistance
- Contact Schoeps service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Schoeps CMIT WS4 SET - CMIT5U Shotgun Microphone CMIT WS4 SET,
which address similar problems with connecting and setting up Shotgun Schoeps.
|
User manual for the Schoeps CMIT WS4 SET - CMIT5U Shotgun Microphone CMIT WS4 SET
The user manual for the Schoeps CMIT WS4 SET - CMIT5U Shotgun Microphone CMIT WS4 SET provides
necessary instructions for the proper use of the product Pro Audio - Location Sound - Shotgun.
The Schoeps CMIT WS4 Set shotgun microphone package eliminates the guesswork of accessorizing the Schoeps CMIT5U shotgun microphone for boompole mounting. The package includes the Schoeps CMIT5U shotgun microphone, Rycote full windscreen kit 4, Rycote Connbox 1, W140 foam windscreen and SG20 stand clamp.
|
If you own a Schoeps shotgun and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Schoeps CMIT WS4 SET - CMIT5U Shotgun Microphone CMIT WS4 SET in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Schoeps CMIT WS4 SET - CMIT5U Shotgun Microphone CMIT WS4 SET:
| Transducer | Condenser | | Polar Pattern | Supercardioid / Lobe-Shaped | | Frequency Response | 40Hz - 20kHz | | Dynamic Range (Typical) | Not Specified by Manufacturer | | Signal-to-Noise Ratio | Equivalent noise level (filters off)
14dB-A, 24dB CCIR | | Maximum Input Sound Level | 132dB SPL @ 0.5% THD | | Power Requirements | 48V Phantom | | Output Impedance | 50 Ohms | | Output Connectors | 3-pin XLR | | Pad | No | | Low Frequency Roll-Off | 80Hz with 18dB/oct
300Hz with 6dB/oct
5dB lift at 10kHz (shelving) | | Dimensions | 9.88 x .827" (251 x 21mm) (Length x Diameter) | | Weight | 3.13 oz (89g) | | Package Weight | 5.8 lb | | Box Dimensions (LxWxH) | 26.6 x 14.75 x 6.0" | |
The user manual for the Schoeps CMIT WS4 SET - CMIT5U Shotgun Microphone CMIT WS4 SET can be downloaded in .pdf
format if it did not come with your new shotgun, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Schoeps users keep a unique electronic library
for Schoeps shotguns,
where you can use our link to download the user manual for the Schoeps CMIT WS4 SET - CMIT5U Shotgun Microphone CMIT WS4 SET.
The user manual lists all of the functions of the Schoeps CMIT WS4 SET - CMIT5U Shotgun Microphone CMIT WS4 SET,
all the basic and advanced features and tells you how to use the shotgun.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Schoeps service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Schoeps CMIT WS4 SET - CMIT5U Shotgun Microphone CMIT WS4 SET. User manuals are also
available on the Schoeps website under Pro Audio - Location Sound - Shotgun.
Question and answer discussion forum concerning user instructions and resolving problems with the Schoeps CMIT WS4 SET - CMIT5U Shotgun Microphone CMIT WS4 SET - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Schoeps CMIT WS4 SET - CMIT5U Shotgun Microphone CMIT WS4 SET
|
|
