User manual Sentech GigE High-Speed STC-SC33POE 0.3MP PoE STC-SC33POEHS
Operating instructions and pdf manual for use - Sentech GigE High-Speed STC-SC33POE 0.3MP PoE STC-SC33POEHS User manual, User manual Sentech GigE High-Speed STC-SC33POE 0.3MP PoE STC-SC33POEHS, Sentech, GigE, High-Speed, STC-SC33POE, 0.3MP, PoE, ST
User manual for Sentech GigE High-Speed STC-SC33POE 0.3MP PoE STC-SC33POEHS
Manufacturer: Sentech
Basic description and contents of package
Product classification: Professional Video - Industrial & Multi-Purpose Cameras
Safety instructions
Startup and operation of the industrial & multi-purpose cameras
Tips for setting up your Sentech
Settings and expert assistance
Contact Sentech service
Troubleshooting
Warranty information
Price: 560 USD
We recommend checking out our discussion threads on the Sentech GigE High-Speed STC-SC33POE 0.3MP PoE STC-SC33POEHS,
which address similar problems with connecting and setting up Industrial & Multi-Purpose Cameras Sentech.
User manual for the Sentech GigE High-Speed STC-SC33POE 0.3MP PoE STC-SC33POEHS
The user manual for the Sentech GigE High-Speed STC-SC33POE 0.3MP PoE STC-SC33POEHS provides
necessary instructions for the proper use of the product Professional Video - Industrial & Multi-Purpose Cameras.
The GigE PoE HS Series STC-SC33POE 0.3MP PoE Color Network Camera from Sentech uses a 1/3" CCD sensor to capture color images at a resolution of 0.3MP (VGA). The camera features a frame rate of 120 fps and communicates over a 6-pin Hirose or Ethernet connector. This compact camera meets all industry standards for GigE Vision and GenICam and is compatible with all standard industry drivers. In addition, it offers user-programmable area of interest (AOI) and a gamma table that can be imported.
If you own a Sentech industrial & multi-purpose cameras and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Sentech GigE High-Speed STC-SC33POE 0.3MP PoE STC-SC33POEHS in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Sentech GigE High-Speed STC-SC33POE 0.3MP PoE STC-SC33POEHS:
Optical Center Positional Accuracy in H and V Directions: ±0.3 mm Rotational Accuracy of H and V: ±1.5°
Total Pixels (H x V)
692 x 504
Active Pixel Count (H x V)
648 x 494
Chip Size
H x V: 0.23 x 0.19" (5.79 x 4.89 mm)
Cell Size
7.4 (H) x 7.4 (V) μm
Sync System
Internal
Vertical Frequency
120 Hz at full resolution, 0.96036 to 480.4355 Hz adjustable via communication, maximum frame rate depends on the AOI setting Maximum frame rate of the camera (480.4355 Hz) is in 104 vertical resolution AOI setting
Preset Continuous Mode: 10 to 16,777,216 sec Preset Trigger Mode: 10 to 16,777,216 sec Pulse Width Mode: 10 sec to unlimited time
Automatic Light Compensation (ALC)
Electronic iris and AGC (on/off)
Gain
0 to 20.4 dB
Gamma
Gamma 1.0 (Factory default) or downloadable gamma table
White Balance
Auto, manual, push to set, white balance modes are available for both raw data and RGB outputs
Other Functions
AOI Function: Programmable AOI setting via the communication Color Interpolation: Available on RGB output Smear Reduction: Selectable on/off via the communication
Minimum: 23°F (-5° C) environmental temperature Maximum: Camera housing temperature (top plate) shall not exceed 149°F (65°C) [corresponds to an environmental temperature of approximately 104°F (40°C)]
Storage Temperature
-22 to 149°F (-30 to 65°C) environmental temperature
Vibration
20 Hz to 200 Hz to 20 Hz (5 minutes per cycle), acceleration 10G, 3 directions 30 minutes each
Shock
Acceleration 38G, half amplitude 6 ms, 3 directions, 3 times each
The user manual for the Sentech GigE High-Speed STC-SC33POE 0.3MP PoE STC-SC33POEHS can be downloaded in .pdf
format if it did not come with your new industrial & multi-purpose cameras, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Sentech users keep a unique electronic library
for Sentech industrial & multi-purpose camerass,
where you can use our link to download the user manual for the Sentech GigE High-Speed STC-SC33POE 0.3MP PoE STC-SC33POEHS.
The user manual lists all of the functions of the Sentech GigE High-Speed STC-SC33POE 0.3MP PoE STC-SC33POEHS,
all the basic and advanced features and tells you how to use the industrial & multi-purpose cameras.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Sentech service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Sentech GigE High-Speed STC-SC33POE 0.3MP PoE STC-SC33POEHS. User manuals are also
available on the Sentech website under Professional Video - Industrial & Multi-Purpose Cameras.
Question and answer discussion forum concerning user instructions and resolving problems with the Sentech GigE High-Speed STC-SC33POE 0.3MP PoE STC-SC33POEHS - no comments have been made yet - be the first to add a comment
Question and answer discussion forum concerning user instructions and resolving problems with the Sentech GigE High-Speed STC-SC33POE 0.3MP PoE STC-SC33POEHS - no comments have been made yet - be the first to add a comment