|
User manual for Sonnox Oxford Reverb - Stereo Reverb Modeling REVERBNATIVE
- Manufacturer: Sonnox
- Basic description and contents of package
- Product classification: Pro Audio - Computer Audio - Virtual Processor Plug-Ins
- Safety instructions
- Startup and operation of the virtual processor plug-ins
- Tips for setting up your Sonnox
- Settings and expert assistance
- Contact Sonnox service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Sonnox Oxford Reverb - Stereo Reverb Modeling REVERBNATIVE,
which address similar problems with connecting and setting up Virtual Processor Plug-Ins Sonnox.
|
User manual for the Sonnox Oxford Reverb - Stereo Reverb Modeling REVERBNATIVE
The user manual for the Sonnox Oxford Reverb - Stereo Reverb Modeling REVERBNATIVE provides
necessary instructions for the proper use of the product Pro Audio - Computer Audio - Virtual Processor Plug-Ins.
The Oxford Reverb from Sonnox is a stereo modeling reverb plug-in. The user has full control over all parameters, including a very comprehensive early reflections section, and integrated 5-band EQ. A large set of presets are included.
By avoiding fixed algorithms, the reverb allows for easily creating virtual spaces depending on artistic need, ranging from dry reflection ambiences, room and hall simulations, sound effects, all the way to wide open reverberant spaces.
|
If you own a Sonnox virtual processor plug-ins and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Sonnox Oxford Reverb - Stereo Reverb Modeling REVERBNATIVE in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Sonnox Oxford Reverb - Stereo Reverb Modeling REVERBNATIVE:
Control Functions and Ranges | INPUT LEVEL CONTROLS AND METERS Input Gain Fader: -144dB to 0.0dB Stereo Separation Fader: -40dB to +6dB LF Roll-Off Fader: 0 to 10 Stereo Input Meter: -50dB to 0.0dB
EARLY REFLECTION CONTROL Select 'Shape' Buttons: Wide Rect, Square, Long Rect and Extended Rect Position Fader: Listening Position: 80% Front to -100% Rear Size Fader: Front to Back Room Size: 10cm to 30m Width Fader: -50dB to 0dB Taper Fader: Reflections Loudness/Length: 0% to 100% Feed Along Fader: Re-Injection of Distributed Sound Density: 0% to 100% Feedback Fader: Re-Circulated Reflections: 0% to 90% Phase Button: Feedback Phase Absorption Fader: Hardness/Softness of Room Space: 0 to 10
TAIL MIX Comp Delay Fader: Start Time of Reverb Tail: 10cm to 30m ER Track Button: Fixes Tail to Track Early Reflection ER Mix Fader: X-Fade - Early Reflections and Dry Signal: 0 to 10 Width Fader: X-Fade - Tail Input Source - Early Ref and Untreated: 0 to 1.0
REVERB TAIL Reverb Tail Fader: 200mS to 10S Overall Size Fader: Delay Size: 0.15 to 1.0 Dispersion Fader: -100% to +100% Phase Diff Fader: -100% to +100% Phase Mod Fader: 0% to 100% Absorption Fader: Hardness/Softness of Room Space: 0 to 10 Diversity Fader: 50% to 100%
5 BAND EQUALIZER PARAMETERS LF Peak/Shelf / Filter: Gain: +/-20dB Frequency: 20Hz to 400Hz Q/Slope: 0.5 to 6.0 Filter Character: 12dB/Oct LMF: Gain: +/-20dB Frequency: 30Hz to 600Hz Q/Slope: 0.5 to 6.0 MF: Gain: +/-20dB Frequency: 100Hz to 6kHz Q/Slope: 0.5 to 6.0 HMF: Gain: +/-20dB Frequency: 900Hz to 18kHz Q/Slope: 0.5 to 6.0 HF Peak/Shelf/Filter: Gain: +/-20dB Frequency: 2kHz to 20khz Q/Slope: 0.5 - 6.0 Filter Character: 12dB/Oct
OUTPUT LEVEL CONTROLS AND METERS Reverb Mix Fader: Start Time of Reverb Tail: 10cm to 30m Wet/Dry Fader: X-Fade: 0.0 to 1.0 100% Wet Button: On/Off Stereo Output Meter: -50dB to 0.0dB | System Requirements | Mac OSX 10.4 or later 1GB RAM minimum Host software that supports Audio Units, RTAS or VST plug-in formats iLok key with latest drivers
PC Windows XP, Vista (32- and 64-bit), or Windows 7 (32- and 64-bit) 1GB RAM minimum Host software that supports RTAS or VST plug-in formats iLok key with latest drivers | |
The user manual for the Sonnox Oxford Reverb - Stereo Reverb Modeling REVERBNATIVE can be downloaded in .pdf
format if it did not come with your new virtual processor plug-ins, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Sonnox users keep a unique electronic library
for Sonnox virtual processor plug-inss,
where you can use our link to download the user manual for the Sonnox Oxford Reverb - Stereo Reverb Modeling REVERBNATIVE.
The user manual lists all of the functions of the Sonnox Oxford Reverb - Stereo Reverb Modeling REVERBNATIVE,
all the basic and advanced features and tells you how to use the virtual processor plug-ins.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Sonnox service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Sonnox Oxford Reverb - Stereo Reverb Modeling REVERBNATIVE. User manuals are also
available on the Sonnox website under Pro Audio - Computer Audio - Virtual Processor Plug-Ins.
Question and answer discussion forum concerning user instructions and resolving problems with the Sonnox Oxford Reverb - Stereo Reverb Modeling REVERBNATIVE - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Sonnox Oxford Reverb - Stereo Reverb Modeling REVERBNATIVE
|
|
|
|
|