|
User manual for SPL Track One Channel Strip with A to D Converter SPLTRACONEAD
- Manufacturer: SPL
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Channel Strips
- Safety instructions
- Startup and operation of the channel strips
- Tips for setting up your SPL
- Settings and expert assistance
- Contact SPL service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the SPL Track One Channel Strip with A to D Converter SPLTRACONEAD,
which address similar problems with connecting and setting up Channel Strips SPL.
|
User manual for the SPL Track One Channel Strip with A to D Converter SPLTRACONEAD
The user manual for the SPL Track One Channel Strip with A to D Converter SPLTRACONEAD provides
necessary instructions for the proper use of the product Pro Audio - Recording - Channel Strips.
The Model 2960 Track One with A to D Converter from SPL is a complete mono channel strip designed for the audio enthusiast searching for an attractive price/performance ratio in channel strips. It includes a number of go-to processors that will spruce up almost whatever you process through it. They include optimized preamp stages for all types of microphones and instruments, SPL's De-Esser processing, compressor limiter equalizer stages, an output stage with metering, and balanced XLR and 1/4" TSR connectors. This model also includes the Module 1090 24 bit, 192 kHz A to D converter for direct digital output. The Track One is a capable and potent tool for the recording of voices and instruments and is engineered to perform in broadcast industry settings, and for studio over live, to post production applications.
The Track One is a channel strip that is designed to be easy to use for vocal and instrument recordings in studio, broadcast or live applications. The controls are reduced to the necessary basics to assist in user-friendliness. Therefore, working with the Track One can be time-saving in live situations.
The Track One is an attractive alternative to built-in console preamps and processing tools. All the modules are immediately at hand for fast interactions, no patching necessary. Recording a voice and providing improved clarity, detail and intelligibility van be addressed almost in a matter of seconds.
The microphone input can be equipped with an optional transformer input stage. These transformers already amplify the microphone signals by factor 5 - the preamps are relieved by this factor at any gain setting. The balanced output can also be equipped with optional transformers.
The compressor can be linked with a second Track One compressor for coherent stereo operation of two units.
A front panel display shows metering for output level and gain reduction and all includes other status LEDs.
24Bit / 192 kHz AD Converter Module 1090
This Track One comes equipped with the 24 Bit / 192 kHz A/D Converter Module 1090, and works with a plug-and-play design for easy installation and usage. It offers an S/P-DIF output with both coaxial and optical connectors in parallel. The heart of the module is a 24-bit converter with a variable sample rate of up to 192 kHz. Quartz oscillators help ensure a clean, low-jitter master clock. The internal sample rate can be switched between 44.1, 48, 88.2 and 96 kHz. Other sample rates (32, 176.4 and 192 kHz) are set by external syncronization.
The converter can be synced to other digital devices via a S/P-DIF input. The internal oscillators are automatically disabled when an external clock signal is present to prevent interference. An extremely effective voltage stabilizing circuit ensures that the converter continuously receives sufficient and stable voltage - an important prerequisite for clean, transparent audio. The compact design minimizes the signal path to the converter. Grounding surfaces on both sides of the circuit board effectively reduce interference and ensure optimal separation between analog and digital components.
A special feature of the printed circuitry layout is the central star ground wiring scheme: Disturbing electronic influences that could affect the ground paths are minimized in that the audio-ground is separated from the ground of the remaining equipment. This leads, in the truest sense of the word "clean," to considerably improved tonal quality. The scatter free toroidal transformer supplies the equipment with the necessary voltages and forms the basis for a clean electrical supply to all parts of the circuitry.
|
If you own a SPL channel strips and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the SPL Track One Channel Strip with A to D Converter SPLTRACONEAD in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the SPL Track One Channel Strip with A to D Converter SPLTRACONEAD:
| Microphone Input | Frequency response: 10 Hz to 200 kHz (200 kHz = -3 dB)
Common mode rejection: 1 kHz: -80 dB / 10 kHz: -68 dB (at -20 dBu)
THD & N
(amplification A-weighted)
20 dB -97.5 dBu
40 dB -91.0 dBu
65 dB -69.6 dBu
Dynamic response: 115 dB | | Instrument Input | Frequency response: 10 Hz to 180 kHz (180 kHz = -3 dB)
THD & N
(amplification A-weighted)
7 dB -98.4 dBu
20 dB -95.8 dBu
42 dB -77.2 dBu
Input impedance Line: 12 kOhm / Instrument: 1 MOhm
Max. input level Line: +28 dBu / Instrument: +12 dBu
Dynamic response: 115 dB | | Outputs | Maximum output level XLR / jack: +20 dBu
Output impedance: 50 ohms | | Digital Interface | Internal sample rates: 44.1, 48, 88.2, 96 kHz
External sample rates: 32 kHz, 176.4 kHz and 192 kHz
Dynamic range: 112 dB (A-weighted)
THD+N (@-1 dBFS/1 kHz): 0.0007%
Frequency response (48 kHz): 10 Hz-22kHz, ±0.2 dB
Jitter (average; 700 Hz-100 kHz): ‹ 300 ps
Stop band attenuation: -105 dB @48 kHz; -102 dB @96 kHz
0 dBFS: = +15 dBu
Power consumption +15 V: max. 115 mA
Power consumption -15 V: max. 17 mA
Dimensions (W x H x D): 3.94 x 1.06 x 3" (100 x 27 x 76 mm)
Weight: 2.39 oz. (68 g) | | Power Supply | Toroidal transformer: 15 VAC
Fuses: 315 mA (230 V/50 Hz)
mA (115 V/60 Hz) | | Dimensions (W x H x D) | Standard EIA-19" Rack mountable 19" / 1U housing: 19.0 x 1.7 x 8.3" (482 x 44 x 210 mm) | | Weight | 6.8 lb (3.1 kg) | |
The user manual for the SPL Track One Channel Strip with A to D Converter SPLTRACONEAD can be downloaded in .pdf
format if it did not come with your new channel strips, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other SPL users keep a unique electronic library
for SPL channel stripss,
where you can use our link to download the user manual for the SPL Track One Channel Strip with A to D Converter SPLTRACONEAD.
The user manual lists all of the functions of the SPL Track One Channel Strip with A to D Converter SPLTRACONEAD,
all the basic and advanced features and tells you how to use the channel strips.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from SPL service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the SPL Track One Channel Strip with A to D Converter SPLTRACONEAD. User manuals are also
available on the SPL website under Pro Audio - Recording - Channel Strips.
Question and answer discussion forum concerning user instructions and resolving problems with the SPL Track One Channel Strip with A to D Converter SPLTRACONEAD - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the SPL Track One Channel Strip with A to D Converter SPLTRACONEAD
|
|
|
|
|
