|
User manual for Telecast Fiber Systems HDX SMPTE Hybrid HDX-304M-2ST-HIT-RC
- Manufacturer: Telecast Fiber Systems
- Basic description and contents of package
- Product classification: Professional Video - Camcorder & Camera Peripherals - Studio & EFP Camera Accessories
- Safety instructions
- Startup and operation of the studio & efp camera accessories
- Tips for setting up your Telecast Fiber Systems
- Settings and expert assistance
- Contact Telecast Fiber Systems service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Telecast Fiber Systems HDX SMPTE Hybrid HDX-304M-2ST-HIT-RC,
which address similar problems with connecting and setting up Studio & EFP Camera Accessories Telecast Fiber Systems.
|
User manual for the Telecast Fiber Systems HDX SMPTE Hybrid HDX-304M-2ST-HIT-RC
The user manual for the Telecast Fiber Systems HDX SMPTE Hybrid HDX-304M-2ST-HIT-RC provides
necessary instructions for the proper use of the product Professional Video - Camcorder & Camera Peripherals - Studio & EFP Camera Accessories.
The HDX SMPTE Hybrid Elimination Adapter Device with Power Supply from Telecast Fiber Systems connects a hybrid-cable-equipped Hitachi camera to a SHED-CCU unit via two single mode optical fiber cables. A single hybrid cable running from the HDX to the camera carries both the signals to/from the CCU and the power (from a local power source connected to the HDX). On the other side, the HDX connects to the SHED adapter unit by the CCU via the optical fiber cables, which can be up to 12.4 miles long. This powering method enables a greater distance between camera and CCU.
The HDX is optically passive, meaning that the optical signals to and from the camera are merely passed through the system. The electrical signals are interpreted to both allow the CCU to recognize that a camera is attached and to safely allow the local powering of the camera. All audio, video, and data signaling in the camera chain is maintained. This unit features re-clocking capability.
|
If you own a Telecast Fiber Systems studio & efp camera accessories and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Telecast Fiber Systems HDX SMPTE Hybrid HDX-304M-2ST-HIT-RC in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Telecast Fiber Systems HDX SMPTE Hybrid HDX-304M-2ST-HIT-RC:
| Attenuation | 0.5 dB / km @ 1300 nm | | Fiber Type | Single-mode (SM) 9/125 µ | | Transmission Method | As determined by camera system | | Distance | Link Margin/Distance: 12 dB / 12.4 mi (20 km) | | Wavelength | 1300 / 1500 nm (from/to camera) | | Connectors | 1 x Hybrid: LEMO (SMPTE 304M) standard, fisher optional
2 x Optical: ST type, singlemode
1 x AC power input | | Indicators | 1 x AC in
1 x DC HV enable
1 x AC HV enable
1 x HV present
1 x Cable open
1 x Short cable
1 x Remote power enable
1 x 4-Segment display for load time and optical power | | Operating Temperature | -4 to 131°F (-20 to 55°C) | | Humidity Range | 0 to 95% non-condensing | | Input Voltage | 100 / 120 / 240 VAC, Nominal, 47 - 63 Hz, 250 VA | | Power Consumption | 150 VA (120 VA available for camera ops, viewfinder, lens, etc.) | | Dimensions | 13.0 x 3.4 x 8.4" (33.0 x 8.6 x 21.3 cm) | | Weight | 8.5 lb (3.9 kg) | | Package Weight | 13.2 lb | | Box Dimensions (LxWxH) | 15.0 x 13.1 x 9.3" | |
The user manual for the Telecast Fiber Systems HDX SMPTE Hybrid HDX-304M-2ST-HIT-RC can be downloaded in .pdf
format if it did not come with your new studio & efp camera accessories, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Telecast Fiber Systems users keep a unique electronic library
for Telecast Fiber Systems studio & efp camera accessoriess,
where you can use our link to download the user manual for the Telecast Fiber Systems HDX SMPTE Hybrid HDX-304M-2ST-HIT-RC.
The user manual lists all of the functions of the Telecast Fiber Systems HDX SMPTE Hybrid HDX-304M-2ST-HIT-RC,
all the basic and advanced features and tells you how to use the studio & efp camera accessories.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Telecast Fiber Systems service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Telecast Fiber Systems HDX SMPTE Hybrid HDX-304M-2ST-HIT-RC. User manuals are also
available on the Telecast Fiber Systems website under Professional Video - Camcorder & Camera Peripherals - Studio & EFP Camera Accessories.
Question and answer discussion forum concerning user instructions and resolving problems with the Telecast Fiber Systems HDX SMPTE Hybrid HDX-304M-2ST-HIT-RC - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Telecast Fiber Systems HDX SMPTE Hybrid HDX-304M-2ST-HIT-RC
|
|
|
|
|
