|
User manual for Telex MS2002 - 2 Channel Main Station F.01U.118.755
Overall Rating: 4.0
80% of respondents would recommend this to a friend.
- Manufacturer: Telex
- Basic description and contents of package
- Product classification: Pro Audio - Location Sound - Wired Intercoms
- Safety instructions
- Startup and operation of the wired intercoms
- Tips for setting up your Telex
- Settings and expert assistance
- Contact Telex service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Telex MS2002 - 2 Channel Main Station F.01U.118.755,
which address similar problems with connecting and setting up Wired Intercoms Telex.
|
User manual for the Telex MS2002 - 2 Channel Main Station F.01U.118.755
The user manual for the Telex MS2002 - 2 Channel Main Station F.01U.118.755 provides
necessary instructions for the proper use of the product Pro Audio - Location Sound - Wired Intercoms.
The Telex MS2002 is a professional 2 channel, wired, intercom master station and system power supply, with both 1- and 2-channel rear panel connector sets, dedicated back-lit function buttons, separate speaker and panel microphone volume controls, selectable voice activation controls, and outputs for connection to a location PA system.
|
If you own a Telex wired intercoms and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Telex MS2002 - 2 Channel Main Station F.01U.118.755 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Telex MS2002 - 2 Channel Main Station F.01U.118.755:
Output Connectors | 2 x 6-Pin XLR Male 2 x 3-Pin XLR Male 2 x RCA Phono | Input Connectors | Front Panel: 4-Pin XLR Male 1/4" TRS Phone Rear Panel: 2 x 3-Pin XLR Female 1 x 9-Pin Female D-Sub | Output Level | Program Out(to Intercom Channel): 1.0 Vrms nominal, 2.3 Vrms maximum Intercom Channels(Balanced Mode): 1.0 Vrms nominal Intercom Channels(Unbalanced Mode): .750 Vrms +/-10% PA Output: 235 mVrms nominal Speaker Output: 0 dB nominal(1.0 Vrms maximum) Headphone Amplifier: 250 mW +/-10% into 150 Ohms 65 mW +/-10% into 600 Ohms | Input Level | Program Input: 100 mV maximum Panel Microphone Input: -25 dBu maximum | Input Impedance | 300 Ohms(Balanced Intercom Channels) 200 Ohms(Unbalanced Intercom Channels) | Frequency Response | 200 Hz - 8 kHz +1/-3 dB | THD + N | <0.2% @ 200 mW(Headphone Amplifier) <0.2% @ Channel Output(Microphone Amplifier) | Minimum Common Mode Rejection | >50 dB | Voltage Gain | Program Input: 25 +/-3 dB Headphone Amplifier: 30 +/-3 dB Panel Microphone Amplifier: Mic to Channel: 25 +/-3 dB Mic to Headphone(adjustable): 45 dB +/-10% maximum in 150 Ohms Mic to PA: 15 +/-3 dB, 235 mVrms +/-10% | Voltage Output | 24 VDC | Call Signaling | Intercom Channels Balanced Mode: Send: 20 kHz +/-100 Hz, 0.5 Vrms +/-10% Receive: 20 kHz +/-800 Hz, 100 mVrms Intercom Channels Unbalanced Mode: Send: 11 +/-3 VDC Receive: 4 VDC Min. | Sidetone | 18 +/-2 dB, adjustable(Headphone Amplifier) -40 dB, 35 dB adjustable range(Intercom Channels, Balanced Mode) | Microphone Type | Electret Condenser | Microphone Input | 1/4" TRS Phone | Phantom Power | 5-24 VDC | Headset Connector | 4-Pin XLR Male | Maximum Current Capacity | Not specified by Manufacturer | Maximum # of Belt Packs | Not Applicable | Input Power Requirement | 100-240 VAC, 50/60 Hz Channel Power: 24 VDC Nominal | Power Adapter | No | Dimensions | 1.75 x 19 x 10.31" (44.5 x 483 x 261.9mm) | Weight | 4.5 lb (2 kg) | Package Weight | 9.35 lb | Box Dimensions (LxWxH) | 20.0 x 20.0 x 4.5" | |
The user manual for the Telex MS2002 - 2 Channel Main Station F.01U.118.755 can be downloaded in .pdf
format if it did not come with your new wired intercoms, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Telex users keep a unique electronic library
for Telex wired intercomss,
where you can use our link to download the user manual for the Telex MS2002 - 2 Channel Main Station F.01U.118.755.
The user manual lists all of the functions of the Telex MS2002 - 2 Channel Main Station F.01U.118.755,
all the basic and advanced features and tells you how to use the wired intercoms.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Telex service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Telex MS2002 - 2 Channel Main Station F.01U.118.755. User manuals are also
available on the Telex website under Pro Audio - Location Sound - Wired Intercoms.
Question and answer discussion forum concerning user instructions and resolving problems with the Telex MS2002 - 2 Channel Main Station F.01U.118.755 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Telex MS2002 - 2 Channel Main Station F.01U.118.755
|
|
|
|
|