We recommend checking out our discussion threads on the Telex NC450D Dynamic Low-Z Handheld Microphone F.01U.117.947,
which address similar problems with connecting and setting up Paging & Security Telex.
User manual for the Telex NC450D Dynamic Low-Z Handheld Microphone F.01U.117.947
The user manual for the Telex NC450D Dynamic Low-Z Handheld Microphone F.01U.117.947 provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Paging & Security.
The NC450D Dynamic Low-Z Handheld Microphone from Telex is a voice-paging, noise-canceling mic that's suitable for use in noisy locations. The voice response characteristics make it a good choice in quiet areas as well.
The NC450D microphone contains a shock-mounted dynamic, differential type cartridge, which discriminates and cancels distant sounds and noise in favor of voice inputs spoken close to the microphone. Output impedance is 200 ohms for matching low impedance input circuits. A push-to-talk switch is located on the microphone housing.
The black microphone housing is constructed of molded ABS plastic, which is engineered to withstand the day-to-day abuse of hand-held mobile microphone applications. The NC450D includes a soft rubber lip guard which assists the user in employing correct microphone-to-mouth positioning.
If you own a Telex paging & security and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Telex NC450D Dynamic Low-Z Handheld Microphone F.01U.117.947 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Telex NC450D Dynamic Low-Z Handheld Microphone F.01U.117.947:
Specifications
Microphone Type
Noise-canceling dynamic
Response
100 Hz to 8 kHz
Output Level
Open Circuit: : -85 dB (ref: 0 dB =lV/µbar) Power Level: -64 dB (ref: 0 dB = 1 mW/10 µbar) Both @ 1 kHz
Impedance
200 Ohms
Switch
Two-position momentary slide Normally open microphone contacts
Cable
Unterminated (pigtail), 4-conductor, two shielded, black neoprene, coiled cord 12" (304 mm) retracted 6' (1.7 m) extended (1.8 m) extended
The user manual for the Telex NC450D Dynamic Low-Z Handheld Microphone F.01U.117.947 can be downloaded in .pdf
format if it did not come with your new paging & security, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Telex users keep a unique electronic library
for Telex paging & securitys,
where you can use our link to download the user manual for the Telex NC450D Dynamic Low-Z Handheld Microphone F.01U.117.947.
The user manual lists all of the functions of the Telex NC450D Dynamic Low-Z Handheld Microphone F.01U.117.947,
all the basic and advanced features and tells you how to use the paging & security.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Telex service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Telex NC450D Dynamic Low-Z Handheld Microphone F.01U.117.947. User manuals are also
available on the Telex website under Pro Audio - Installation Sound - Paging & Security.
Question and answer discussion forum concerning user instructions and resolving problems with the Telex NC450D Dynamic Low-Z Handheld Microphone F.01U.117.947 - no comments have been made yet - be the first to add a comment