|
User manual for Toa Electronics A-9240SHM2 240W Modular Amplifier A-9240SHM2 CU
- Manufacturer: Toa Electronics
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - Mixer/Amplifiers
- Safety instructions
- Startup and operation of the mixer/amplifiers
- Tips for setting up your Toa Electronics
- Settings and expert assistance
- Contact Toa Electronics service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Toa Electronics A-9240SHM2 240W Modular Amplifier A-9240SHM2 CU,
which address similar problems with connecting and setting up Mixer/Amplifiers Toa Electronics.
|
User manual for the Toa Electronics A-9240SHM2 240W Modular Amplifier A-9240SHM2 CU
The user manual for the Toa Electronics A-9240SHM2 240W Modular Amplifier A-9240SHM2 CU provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - Mixer/Amplifiers.
The A-9240SHM2 240W Modular Amplifier from Toa Electronics is designed to be used in conjunction with optional Toa modules and can be configured for up to 8 inputs and 8 outputs. 9000 series modules as well as existing 900 series input modules can be used with the A-9240SHM2. Its 240 W power amplifier allows it to individually perform multi-origin broadcasts. It is equipped with signal processing and control functions necessary for sound reinforcement, permitting all parameters to be set using the mixer. Settings data can be stored inside the unit and called up using the keys on the front panel.
|
If you own a Toa Electronics mixer/amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Toa Electronics A-9240SHM2 240W Modular Amplifier A-9240SHM2 CU in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Toa Electronics A-9240SHM2 240W Modular Amplifier A-9240SHM2 CU:
| Power Source | 120 V AC, 60 Hz | | Power Consumption | 250 W | | Rated Output | 240 W | | Audio Input | Max. 8 channels, modular construction (modules optional)
Power amplifier input: 0 dB(*1), 10 kΩ, RCA pin jack | | Audio Output | Preamplifier Output 1: 0 dB(*1), 300 ohm, unbalanced, RCA pin jack Preamplifier Output 2: 0 dB(*1), 600 ohm, balanced, removable terminal block (3 pins) Speaker Output: 240 W, 21 ohm, BTL output, removable terminal block (4 pins) | | Module Slot | Analog Input (slot 1 - 8): -10 dB(*1), 10 kohm, unbalanced Digital Input (slot 1 - 4): 24-bit/48 kHz MIX Output (slot 1 - 8): -14 dB(*1), 330 ohm (CH 1 prefader output), unbalanced Digital Output (slot 5 - 7): 24-bit/48 kHz Power Supply (slot 1 - 8): +24 V, -24 V, +6 V DC | | Reference Level | -20 dBFS | | Power Bandwidth | 20 Hz - 20 kHz, 0.008 % THD | | Frequency Response | Power Amplifier Section: 20 Hz - 20 kHz, +0, -1 dB
Analog Input Module to Speaker Output: 20 Hz - 20 kHz, +1, -3 dB | | Total Harmonic Distortion | Power amplifier section: 0.008 % (22 kHz LPF, 1 kHz, rated power) Analog input module to speaker output: 0.008 % (22 kHz LPF, 1 kHz, rated power) | | S/N Ratio | At Input short, 20 Hz - 20 kHz, set to ALL FLAT or OFF setting Output Volume Min.: 90 dB (preamplifier output) Output Volume Max.: 61 dB (preamplifier output, Input 1 volume: 0 dB, Other Inputs: OFF) Power Amplifier Section: 110 dB | | Cross Talk | 64 dB or more (at 20 kHz) | | Tone Control | Bass: ±12 dB (at 100 Hz) Treble: ±12 dB (at 10 kHz) | | Parametric Equalizer | 10 bands, Frequency: 20 Hz - 20 kHz, 31 points, Variable Range: ±12 dB, Q: 0.3 - 5 | | Speaker Equalizer | 10 (setup software has 30 TOA speaker presets) | | High-Pass Filter | -12 dB/oct, Variable Frequency Range: 20 Hz - 20 kHz, 31 points | | Low-Pass Filter | -12 dB/oct, Variable Frequency Range: 20 Hz - 20 kHz, 31 points | | Compressor | Depth: 1 - 5 | | Delay | 0 - 40 ms (1 ms steps), maximum 40 ms (CH 1 + CH 2), mixer mode only | | Scene/Event Memory | 32 | | Advanced Functions | Key lock function | | Control I/O | RS-232C(*2), D-sub connector (9 P, female) Control Input: 4 inputs, no-voltage make contact input, open voltage: 3.3 V DC Short-Circuit Current: 1 mA or less, removable terminal block (14 pins) Control Output: 4 outputs, open collector output, withstand voltage: 27 V DC Control Current: 50 mA, removable terminal block (14 pins) (14 pins) Remote Volume: 2 channels, connect a 10 kΩ/linear taper variable resistor or input the DC voltage of 0 to +10 V, removable terminal block (14 pins) | | Operating Temperature | -10 â¿¿ to +40 â¿¿ (14 ã¿¿F to 104 ã¿¿F) | | Operating Humidity | 35% to 80% RH (no condensation) | | Finish | Panel: Aluminum, hair-line, black Case: Surface-treated steel plate, black, paint | | Dimensions | 16.54 x 4.24 × 15.55" (420 × 107.6 × 395 mm) | | Weight | 24.25 lb (11 kg) | | Package Weight | 31.8 lb | | Box Dimensions (LxWxH) | 21.26 x 19.291 x 7.283" | |
The user manual for the Toa Electronics A-9240SHM2 240W Modular Amplifier A-9240SHM2 CU can be downloaded in .pdf
format if it did not come with your new mixer/amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Toa Electronics users keep a unique electronic library
for Toa Electronics mixer/amplifierss,
where you can use our link to download the user manual for the Toa Electronics A-9240SHM2 240W Modular Amplifier A-9240SHM2 CU.
The user manual lists all of the functions of the Toa Electronics A-9240SHM2 240W Modular Amplifier A-9240SHM2 CU,
all the basic and advanced features and tells you how to use the mixer/amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Toa Electronics service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Toa Electronics A-9240SHM2 240W Modular Amplifier A-9240SHM2 CU. User manuals are also
available on the Toa Electronics website under Pro Audio - Installation Sound - Mixer/Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Toa Electronics A-9240SHM2 240W Modular Amplifier A-9240SHM2 CU - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Toa Electronics A-9240SHM2 240W Modular Amplifier A-9240SHM2 CU
|
|
|
|
|
