|
User manual for TRENDnet VDV and USB Cable Tester TC-NT3
- Manufacturer: TRENDnet
- Basic description and contents of package
- Product classification: Pro Audio - In-Line Problem Solvers - Cable Testers & Tone Generators
- Safety instructions
- Startup and operation of the cable testers & tone generators
- Tips for setting up your TRENDnet
- Settings and expert assistance
- Contact TRENDnet service
- Troubleshooting
- Warranty information
- Price: 65 USD
|
We recommend checking out our discussion threads on the TRENDnet VDV and USB Cable Tester TC-NT3,
which address similar problems with connecting and setting up Cable Testers & Tone Generators TRENDnet.
|
User manual for the TRENDnet VDV and USB Cable Tester TC-NT3
The user manual for the TRENDnet VDV and USB Cable Tester TC-NT3 provides
necessary instructions for the proper use of the product Pro Audio - In-Line Problem Solvers - Cable Testers & Tone Generators.
The VDV and USB Cable Tester from TRENDnet is a comprehensive cable tester for network professionals that accurately tests a variety of voice, data, video and USB cables. The unit identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 1,000 ft. Quick Test mode issues a pass/fail for large test batches and all the components fit into a convenient travel case.
|
If you own a TRENDnet cable testers & tone generators and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the TRENDnet VDV and USB Cable Tester TC-NT3 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the TRENDnet VDV and USB Cable Tester TC-NT3:
| Test Pin Configuration | RJ45 EIA, TIA-568A/568B, and crossover cables
RJ9, RJ11, RJ12, RJ14, RJ25, RJ45, and RJ61
USOC 2, 4, 6, and 8
Coax Video-BNC and CATV-F
USB 3.0, USB 2.0 | | Transmitter Unit Interface | 1 x RJ port
1 x USB 3.0/2.0 Type-A port
1 x USB 3.0/2.0 Type-B port
Test button
Mode button
On/off button
LED indicators
Battery compartment
Receiver unit attachment port | | Remote Unit Interface | 1 x RJ port
1 x USB 3.0/2.0 Type-A port | | Compatible Cables | Cat 8, 7, 6, 6e, 6a, 5, 5e, 4, 3, 3e
Coax Video-BNC and CATV-F cable (with included RJ45 to F adapters)
RJ9, RJ11, RJ12, RJ14, RJ25, and RJ61 cables
USOC 2, 4, 6, and 8
USB 3.0 A to B
USB 2.0 A to B | | Tone Frequency | 600 to 1,000 Hz | | Other Features | Tests grounding of shielded (screened) cables
Identifies proper, severed, short circuit, and cross connected pins
Continuous scan mode is design to accommodate testing with cable ends in different locations
Manual scan is well suited for loop back cable testing
Designed to quickly test large cable quantities, Quick Test Mode identifies a given cable type and then immediately issues a Pass/Fail for the same cable type
Blinking Hub/Switch Mode identifies connected hub/switch port
Compatible with TRENDnet's TC-TP1, Network Probe, to trace cables using two selectable tones
Tests cables lengths of up to 1,000 ft (300 m) | | Operating Temperature | 32 to 122°F (0 to 50°C)
Maximum 95% non-condensing | | Power Requirements | Transmitter: 9 VDC battery (not included)
Remote Unit: No power needed | | Certification | CE | | Dimensions | Transmitter: 4.6 x 2.6 x 1.1" (117 x 67 x 27 mm) Remote Unit: 2.2 x 1.2 x 1.1" (57 x 30 x 27 mm) | | Weight | Transmitter: 5.1 oz (144 g) Remote Unit: 0.9 oz (26 g) | | Package Weight | 0.55 lb | | Box Dimensions (LxWxH) | 6.6 x 4.8 x 2.2" | |
The user manual for the TRENDnet VDV and USB Cable Tester TC-NT3 can be downloaded in .pdf
format if it did not come with your new cable testers & tone generators, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other TRENDnet users keep a unique electronic library
for TRENDnet cable testers & tone generatorss,
where you can use our link to download the user manual for the TRENDnet VDV and USB Cable Tester TC-NT3.
The user manual lists all of the functions of the TRENDnet VDV and USB Cable Tester TC-NT3,
all the basic and advanced features and tells you how to use the cable testers & tone generators.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from TRENDnet service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the TRENDnet VDV and USB Cable Tester TC-NT3. User manuals are also
available on the TRENDnet website under Pro Audio - In-Line Problem Solvers - Cable Testers & Tone Generators.
Question and answer discussion forum concerning user instructions and resolving problems with the TRENDnet VDV and USB Cable Tester TC-NT3 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the TRENDnet VDV and USB Cable Tester TC-NT3
|
|
|
|
|
