|
User manual for Ubiquiti Networks EdgeSwitch ES-48-750W Managed PoE ES-48-750W
Overall Rating: 5.0
100% of respondents would recommend this to a friend.
- Manufacturer: Ubiquiti Networks
- Basic description and contents of package
- Product classification: Computers & Solutions - Networking - Network Switches, Bridges & Hubs
- Safety instructions
- Startup and operation of the network switches, bridges & hubs
- Tips for setting up your Ubiquiti Networks
- Settings and expert assistance
- Contact Ubiquiti Networks service
- Troubleshooting
- Warranty information
- Price: 945 USD
|
We recommend checking out our discussion threads on the Ubiquiti Networks EdgeSwitch ES-48-750W Managed PoE ES-48-750W,
which address similar problems with connecting and setting up Network Switches, Bridges & Hubs Ubiquiti Networks.
|
User manual for the Ubiquiti Networks EdgeSwitch ES-48-750W Managed PoE ES-48-750W
The user manual for the Ubiquiti Networks EdgeSwitch ES-48-750W Managed PoE ES-48-750W provides
necessary instructions for the proper use of the product Computers & Solutions - Networking - Network Switches, Bridges & Hubs.
The Ubiquiti Networks EdgeSwitch ES-48-750W Managed PoE+ Gigabit Switches with SFP is a fully managed, PoE+ Gigabit switch that is part of the EdgeMAX line of products. It provides powerful performance and clever switching capabilities that are perfect for growing networks. Plus, it supports a robust forwarding capacity that can simultaneously process traffic on all ports at line rate without any packet loss. Equipped with 48 auto-sensing IEEE 802.3af/at or configurable 24V Passive PoE Gigabit Ethernet ports that support a 70 Gbps non-blocking throughput rate, the EdgeSwitch is designed to simplify your infrastructure. The EdgeSwitch's other features include two SFP ports, two SFP+ ports, a Configuration Interface for convenient management, the availability of an industry-standard command-line interface (CLI), and a sophisticated operating system that provides basic switching features and a PoE configuration per port.
|
If you own a Ubiquiti Networks network switches, bridges & hubs and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Ubiquiti Networks EdgeSwitch ES-48-750W Managed PoE ES-48-750W in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Ubiquiti Networks EdgeSwitch ES-48-750W Managed PoE ES-48-750W:
| Total Non-Blocking Throughput | 70 Gbps | | Switching Capacity | 140 Gbps | | Forwarding Rate | 104.16 Mpps | | Networking Ports | Gigabit Ethernet (10/100/1000 Mbps) Ports x 48 (RJ-45)
SFP+ Ethernet (1/10 Gbps) Ports x 2
SFP Ethernet (1 Gbps) Ports x 2 | | Management Interface | Ethernet In/Out Band | | Shock and Vibration | ETSI300-019-1.4 (standard) | | ESD/EMP Protection | ±24 kV (air)
±24 kV (contact) | | PoE Interfaces | PoE IEEE 802.3af/at (pins 1, 2+ / 3, 6-)
24 VDC Passive PoE (pins 4, 5+ / 7, 8-) | | Maximum PoE+ Watts per Port by PSE | 34.2 W | | Voltage Range 802.3at Mode | 50 to 57 W | | Maximum Passive PoE Watts per Port | 17 W | | 24 V Passive PoE Voltage Range | 20 to 27 W | | Software Information | Core Switching Features
ANSI/TIA-1057: LLDP-Media Endpoint Discovery (MED)
IEEE 802.1AB: Link Layer Discovery Protocol (LLDP)
IEEE 802.1D: Spanning Tree Compatibility
IEEE 802.1S: Multiple Spanning Tree Compatibility
IEEE 802.1W: Rapid Spanning Tree Compatibility
IEEE 802.1Q: Virtual LANs with Port-Based VLANs
IEEE 802.1p: Ethernet Priority with User Provisioning and Mapping
IEEE 802.1X: Port-Based Authentication with Guest VLAN Support
IEEE 802.3: 10BASE-T
IEEE 802.3u: 100BASE-T
IEEE 802.3ab: 1000BASE-T
IEEE 802.1ak: Virtual Bridged Local Area Networks - Amendment 07: Multiple Registration Protocol
IEEE 802.3ac: VLAN Tagging
IEEE 802.3ad: Link Aggregation
IEEE 802.3x: Flow Control
IEEE 802.1D-2004: Generic Attribute Registration Protocol: Clause 12 (GARP)
IEEE 802.1D-2004: Dynamic L2 multicast registration: Clause 10 (GMRP)
IEEE 802.1Q-2003: Dynamic VLAN registration: Clause 11.2 (GVRP)
RFC 4541: Considerations for Internet Group Management Protocol (IGMP) Snooping Switches
RFC 5171: Unidirectional Link Detection (UDLD) Protocol
Advanced Layer 2 Features
Broadcast Storm Recovery
Broadcast/Multicast/Unknown Unicast Storm Recovery
DHCP Snooping
IGMP Snooping Querier
Independent VLAN Learning (IVL) Support
Jumbo Ethernet Frame Support
Port MAC Locking
Port Mirroring
Protected Ports
Static MAC Filtering
TACACS+
Voice VLANs
Unauthenticated VLAN
Internal 802.1X Authentication Server
Platform Specifications
VLANs: 255
MAC Addresses: 8k
MSTP Instances: 4
LAGs: 6
ACLs: 100 with 10 Rules per Port
Traffic Classes (Queues): 8
System Facilities
Event and Error Logging Facility
Run-Time and Configuration Download Capability
PING Utility
FTP/TFTP Transfers via IPv4/IPv6
Malicious Code Detection
BootP and DHCP
RFC 2021: Remote Network Monitoring Management Information Base Version 2
RFC 2030: Simple Network Time Protocol (SNTP)
RFC 2819: Remote Network Monitoring Management Information Base
RFC 2865: RADIUS Client
RFC 2866: RADIUS Accounting
RFC 2868: RADIUS Attributes for Tunnel Protocol Support
RFC 2869: RADIUS Extensions
RFC 3579: RADIUS Support for EAP
RFC 3580: IEEE 802.1X RADIUS Usage Guidelines
RFC 3164: BSD Syslog Protocol
Management:
Web UI
Industry-Standard CLI
IPv6 Management
Password Management
Autoinstall Support for Firmware Images and Configuration Files
SNMP v1, v2, and v3
SSH 1.5 and 2.0
SSL 3.0 and TLS 1.0
Secure Copy (SCP)
Telnet (Multi-Session Support)
Layer 3 Routing:
Static Routing
Policy Based Routing | | QoS Software Information | Access Control Lists (ACLs), Permit/Deny Actions for Inbound IP and Layer 2 Traffic
Time-Based ACL
Source/Destination IP Address
TCP/UDP Source/Destination Port
IP Protocol Type
Type of Service (ToS) or Differentiated Services (DSCP) Field
Source/Destination MAC Address
EtherType
IEEE 802.1p User Priority
VLAN ID
RFC 1858: Security Considerations for IP Fragment Filtering
Optional ACL Rule Attributes
Assign Flow to a Specific Class of Service (CoS) Queue
Redirect Matching Traffic Flows
Differentiated Services (DiffServ)
Classify Traffic Based on Same Criteria as ACLs
Mark the IP DSCP or Precedence Header Fields, Optional
Police the Flow to a Specific Rate with Two-Color Aware Support
RFC 2474: Definition of the Differentiated Services Field (DS field) in the IPv4 and IPv6 Headers
RFC 2475: An Architecture for Differentiated Services
RFC 2597: Assured Forwarding Per-Hop Behavior (PHB) Group
RFC 3246: An Expedited Forwarding PHB
RFC 3260: New Terminology and Clarifications for DiffServ
Class of Service (CoS) Queue Mapping Configuration
AutoVoIP: Automatic CoS Settings for VoIP
IP DSCP-to-Queue Mapping
Configurable Interface Trust Mode (IEEE 802.1p, DSCP, or Untrusted)
Interface Egress Shaping Rate
Strict Priority versus Weighted Scheduling per Queue | | Ethernet (RJ-45) Data Port LEDs | PoE
Speed / Link / Activity | | SFP+/SFP Data Port LEDs | Speed / Link / Activity | | Power Requirements | 100 - 240 VAC, 50/60 Hz (universal input) | | Power Supply | AC/DC Internal (750 W DC) | | Maximum Power Consumption | 750 W | | Operating Temperature | 23 to 104°F (-5 to 40°C) | | Operating Humidity | 5 to 95% (non-condensing) | | Rack Compatibility | 1U | | Certifications | CE
FCC
IC | | Dimensions (WxHxD) | 19.1 x 1.75 x 13.7" (485 x 45 x 348 mm) | | Weight | 11.7 lb (5.3 kg) | | Package Weight | 17.0 lb | | Box Dimensions (LxWxH) | 22.5 x 16.5 x 4.0" | |
The user manual for the Ubiquiti Networks EdgeSwitch ES-48-750W Managed PoE ES-48-750W can be downloaded in .pdf
format if it did not come with your new network switches, bridges & hubs, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Ubiquiti Networks users keep a unique electronic library
for Ubiquiti Networks network switches, bridges & hubss,
where you can use our link to download the user manual for the Ubiquiti Networks EdgeSwitch ES-48-750W Managed PoE ES-48-750W.
The user manual lists all of the functions of the Ubiquiti Networks EdgeSwitch ES-48-750W Managed PoE ES-48-750W,
all the basic and advanced features and tells you how to use the network switches, bridges & hubs.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Ubiquiti Networks service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Ubiquiti Networks EdgeSwitch ES-48-750W Managed PoE ES-48-750W. User manuals are also
available on the Ubiquiti Networks website under Computers & Solutions - Networking - Network Switches, Bridges & Hubs.
Question and answer discussion forum concerning user instructions and resolving problems with the Ubiquiti Networks EdgeSwitch ES-48-750W Managed PoE ES-48-750W - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Ubiquiti Networks EdgeSwitch ES-48-750W Managed PoE ES-48-750W
|
|
|
|
|
