|
User manual for Warm Audio TB12/500 - Tone Beast Microphone TB12/500
- Manufacturer: Warm Audio
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Microphone Preamps
- Safety instructions
- Startup and operation of the microphone preamps
- Tips for setting up your Warm Audio
- Settings and expert assistance
- Contact Warm Audio service
- Troubleshooting
- Warranty information
- Price: 549 USD
|
We recommend checking out our discussion threads on the Warm Audio TB12/500 - Tone Beast Microphone TB12/500,
which address similar problems with connecting and setting up Microphone Preamps Warm Audio.
|
User manual for the Warm Audio TB12/500 - Tone Beast Microphone TB12/500
The user manual for the Warm Audio TB12/500 - Tone Beast Microphone TB12/500 provides
necessary instructions for the proper use of the product Pro Audio - Recording - Microphone Preamps.
The 500 series "lunchbox" version of the Warm Audio TB12/500 - Tone Beast Microphone Preamplifier is a single-channel mic preamplifier this is designed to provide a wide range of tonal options for mic, instrument, and line-level sources. It is capable of up to 71 dB of input gain, and employs an output attenuator, allowing you to drive your input signal harder for color and saturation while keeping your signal from peaking.
The device lives up to its name by allowing you to select between two different discrete op amps, two different steel and 50% Nickel CineMag output transformers that can be bypassed altogether, two input impedance settings for dynamic, condenser, or ribbon mic optimization, and two different capacitors. The preamp is capable of producing colored, vintage-style tones with early break up and clean, transparent modern tones. Thanks to its front-panel instrument input, the preamp can be used to record DI tracks, while the front-panel 1/4" line input allows you to use the TB12 to provide color or warm up previously recorded tracks.
The unit features 48V phantom power to its front-panel XLR input, a high-pass filter at 80 Hz, a 20 dB pad, and a polarity reverse switch.
|
If you own a Warm Audio microphone preamps and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Warm Audio TB12/500 - Tone Beast Microphone TB12/500 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Warm Audio TB12/500 - Tone Beast Microphone TB12/500:
Type | Discrete 312 preamp design with coupled CineMag Transformers | Input | 1x front-panel XLR microphone input 1x front-panel 1/4" (6.3 mm) Hi-Z instrument input 1x front-panel 1/4" (6.3 mm) TRS line input | Output | 500 series module connector | Gain | 71 dB | Transformer | Selectable steel or 50% nickel CineMag output transformers Selectable transformer bypass | Op Amp | Selectable between 1731 and 918 style; socketed and swappable with your choice of 2520 6-pin footprint op amps | Impedance | Input Impedance: switchable between 150 and 600 Ω (labeled "Tone" on front panel) | Capacitors | Switchable between Tantalum and Electrolytic for different characters | High-Pass Filter | 80 Hz | Polarity Reverse | Yes | Phantom Power | +48 V | Output Attenuation | Yes; allows for saturation flexibility of both the op amps and transformers | Pad | 20 dB | VU Meter | LED | Power | External line-lump 24 V AC power transformer for low noise | Rackmount | 500 series | Dimensions | Not specified by the manufacturer | Weight | Not specified by the manufacturer | Package Weight | 4.0 lb | Box Dimensions (LxWxH) | 9.9 x 8.3 x 5.5" | |
The user manual for the Warm Audio TB12/500 - Tone Beast Microphone TB12/500 can be downloaded in .pdf
format if it did not come with your new microphone preamps, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Warm Audio users keep a unique electronic library
for Warm Audio microphone preampss,
where you can use our link to download the user manual for the Warm Audio TB12/500 - Tone Beast Microphone TB12/500.
The user manual lists all of the functions of the Warm Audio TB12/500 - Tone Beast Microphone TB12/500,
all the basic and advanced features and tells you how to use the microphone preamps.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Warm Audio service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Warm Audio TB12/500 - Tone Beast Microphone TB12/500. User manuals are also
available on the Warm Audio website under Pro Audio - Recording - Microphone Preamps.
Question and answer discussion forum concerning user instructions and resolving problems with the Warm Audio TB12/500 - Tone Beast Microphone TB12/500 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Warm Audio TB12/500 - Tone Beast Microphone TB12/500
|
|
|
|
|