Wimberley User manual

Instruction manual - Wimberley

Wimberley Pouch for Sidekick Gimbal Head Adapter (Black) PO-120 The custom-made, neoprene Wimberley Sidekick Pouch is designed to hold and protect the Sidekick Gimbal Head Adapter. It is reinforced with stitched Cordura nylon, and a pull cord closure allows for easy access while the Wimberley-... Wimberley Safety Stop Screw for QR Plates and SW-STOP The Wimberley Safety Stop Screw makes an ideal replacement or backup part for all Wimberley lens plates, camera plates, and replacement feet.... Wimberley SS-100 Spotting Scope Screw SS-100 The Wimberley SS-100 Spotting Scope Screw is used to mount lens plates to spotting scopes or telescopes.... Wimberley Ground Spike PP-310 The Wimberley Ground Spike is a specially designed screwdriver optimized for use as a ground stake. The spike is easily inserted in a variety of ground types, remains securely positioned and is easily removed. The shank is made of... Wimberley The Plamp Stake PP-300 The Plamp Stake from Wimberley is a device which allows the Plamp II to be secured independently in various ground or turf types. The Plamp Stake consists of two components: the Ground Spike and the Extension Tube. The Ground Spik... Wimberley The Plamp Extension Tube PP-320 Add more than 10" in height to your Plamp Stake with The Plamp Extension Tube from Wimberley. More than one extension may be purchased and connected together up to a maximum of four. The Plamp Extension is UV protected to prevent ... Wimberley Gimbal Head Pouch PO-100 Protect your gimbal head from scratches with the Wimberley Gimbal Head Pouch. This soft neoprene covering fits all versions of Wimberley's gimbal-style tripod heads, including the Wimberley Head WH-200 and WH-200-S. It fits over t... Wimberley The Plamp II Thumbscrew Clip PP-211 The Plamp II Thumbscrew Clip from Wimberly is a replacement part for the clamp included with the Plamp II or as an upgrade for the original Plamp. It features nylon super tough nylon jaws with notches for securely holding a reflec... Wimberley 12" Extension for Plamp II PP-222 The 12" Extension for Plamp II from Wimberly is a useful set of Loc-Line segments to extend the reach of your Plamp II. It weighs 2.4 ounces and simply pops into place, but it will make the Plamp II less rigid when fully extended.... Wimberley The Plamp II PP-200 The Plamp II from Wimberly is a 23" articulating Loc-Line arm designed to help photographers position objects and tools during a shoot. This arm has a load capacity of about 8 ounces, depending on the positioning of the arm, and w... Wimberley F-9 Flash Bracket for Head Version II F-9 The Wimberley F-9 Flash Bracket consists of modules M3 & M9. It attaches directly to the swinging arm of the Wimberley Head Version II. Since it is attached to the head and not your lens, it remains in place when you switch lenses... Wimberley CK-550 Soft-Touch Knob Conversion Kit CK-550 The Wimberley CK-550 Soft-Touch Knob Conversion Kit enables you to replace the round tilt-adjustment knob on older Sidekick and Wimberley Heads with a five-lobe, soft-touch knob that boasts better ergonomics and can be operated mo... Wimberley WH-200-S Sidemount Wimberley Head WH-200-S The Wimberley WH-200-S Sidemount Wimberley Head is a lighter, more compact alternative to the full Wimberley Gimbal Head. The Sidemount Wimberley head shares the main casting and pan and tilt mechanisms with the Wimberley Head, bu... Wimberley CK-200 Full Gimbal Conversion Kit CK-200 The Wimberley CK-200 Full Gimbal Conversion Kit allows you to turn your WH-200-S Sidemount Wimberley Head into the classic, full gimbal WH-200 Wimberley Head.... Wimberley AP-554 Replacement Foot for Nikon 500mm f/4 AP-554 The Wimbereley AP-554 Replacement Foot replaces the stock foot on the rotation collar of the Nikon 500mm f/4 AF-S (I, II & VR) and 200-400mm f/4 AF-S (VR) lenses. The low-profile foot creates a lower center of gravity for your lon... Wimberley CK-100 Sidemount Conversion Kit CK-100 The Wimberley CK-100 Sidemount Conversion Kit allows you to replace the swinging gimbal arm and Arca-style quick-release platform of the Wimberley Head Version II (WH-200) with a side-mounted Wimberley quick-release clamp, effecti... Wimberley Extra Screw (1/4-20") SW-100 This is a spare 1/4"-20 screw for Wimberley quick release plates.... Wimberley BS-100 3/8"-16 to 1/4"-20 Brass BS-100 The Wimberley BS-100 Brass Reducer Bushing screws into the female threading upon the tripod collars of some larger telephoto lenses, essentially converting the hole to act like a 1/4"-20 threaded socket.  Wimberley quick... Wimberley Module 1 M-1 Quick Release Arm M-1 Wimberley has a system of flash bracket components that are modular, versatile and easily stowed in a small space when not in use.  Known as the Shape-Shifter Modular Flash Bracket System, the components connect without ... Wimberley Replacement Foot for Canon Long Telephoto Lenses This Wimberley Replacement Foot for Canon 600 f4 & 400 f2.8 and 800 f/5.6 IS takes the place of the tripod collar foot and converts the collar to Arca-style clamp capability without the need for additional quick release plates...