|
User manual for WTI MACH-V High Power Bridge Wireless Ethernet Radio MACH-V
- Manufacturer: WTI
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Video Transmission - Wireless Transmission
- Safety instructions
- Startup and operation of the wireless transmission
- Tips for setting up your WTI
- Settings and expert assistance
- Contact WTI service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the WTI MACH-V High Power Bridge Wireless Ethernet Radio MACH-V,
which address similar problems with connecting and setting up Wireless Transmission WTI.
|
User manual for the WTI MACH-V High Power Bridge Wireless Ethernet Radio MACH-V
The user manual for the WTI MACH-V High Power Bridge Wireless Ethernet Radio MACH-V provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Video Transmission - Wireless Transmission.
The WTI MACH-V High Power Bridge Wireless Ethernet Radio is designed for remote connectivity of IP cameras, NVRs, or a device requiring Ethernet communication. It transfers data using point-to-point, point-to-multipoint, or WDS (semi-mesh) protocols. With 54Mbps of data throughput, the MACH-V transfers encrypted data up to a distance of 50 miles (80km).
Supporting POE option, the MACH-V can be configured using a web browser. The IP radio offers remote Ethernet connectivity in a simple package and provides reliable performance in all climatic conditions.
|
If you own a WTI wireless transmission and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the WTI MACH-V High Power Bridge Wireless Ethernet Radio MACH-V in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the WTI MACH-V High Power Bridge Wireless Ethernet Radio MACH-V:
Network Standard | IEEE 802.1 1 a, IEEE 802.3, IEEE8O2.3x | Ethernet | 10/100 BaseT Ethernet, Auto MDI/MDI | Network Architecture | Infrastructure, Ad-Hoc, MAC, CSMA/CA | Status Indicators | POWER, Wireless LAN (RF), Ethernet LAN, Receives Signal Strength (RSS) | Push Button | Reset to Default Button | Power Consumption | IEEE 802.1 Ia, TX: 1000mA RX: 400mA | Antenna Connector | N-type female | Output Power | 16 dBm(±2dB)@54Mbps 17 dBm (± 2 dB)@48Mbps 18 dBm (± 2 dB)@36 Mbps 19 dBm (± 2 dB)@6 Mbps | Receiver Sensitivity | IEEE 802.1 Ia Sensitivity @ 10% Packet Error Rate 54 Mbps: -70 dBm, 48 Mbps: -71 dBm, 36 Mbps: -75 dBm, 24 Mbps: -79 dBm, 18 Mbps: -82 dBm, 12 Mbps: -84 dBm, 9 Mbps: -86 dBm, 6 Mbps: -87 dBm | Modulation | IEEE 802.1 Ia (OFDM) 48/54 Mbps (QAM-64) 24/36 Mbps (QAM-I6) 12/18 Mbps (QPSK) 6/9 Mbps (BPSK) | Operating Frequency | USA/FCC: 5.15 GHz - 5.25 GHz / 5.25 GHz - 5.35 GHz / 5.47 GHz - 5.725 GHz / 5.725 GHz - 5.825 GHz | Power | Input Voltage - 85 to 264V AC Line frequency - 50/60Hz Power output - 5V DC/2A | Operating Temperature | -4O to 70º C (4O to I 58º F) 10 to 90% (non-condensing) | Dimensions (WxHxD) | 9.3 x 11.3 x 5.3" (23.62 x 28.7 x 13.46 cm) | Weight | 8lb (3.62kg) | Bridge Features | Universal bridging MAC address cloning RTS threshold/fragmentation threshold Infrastructure or Ad-Hoc mode Non-IP traffic bridging | Security Features | 64-Bit/i 28-Bit WEP encryption WPA personal using TKIP or AES WPA enterprise using TKIP or AES 802. lx authenticator Cisco LEAP support MAC address filter | Management Features | Web Access ( Username/Password Protected) Static IP Automatic device discovery & configuration SNMP vi , DHCP and PPPoE (ethernet or wireless) Firmware upgrade via web browser Transmit power adjustment | Package Weight | 11.0 lb | Box Dimensions (LxWxH) | 18.0 x 16.0 x 14.0" | |
The user manual for the WTI MACH-V High Power Bridge Wireless Ethernet Radio MACH-V can be downloaded in .pdf
format if it did not come with your new wireless transmission, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other WTI users keep a unique electronic library
for WTI wireless transmissions,
where you can use our link to download the user manual for the WTI MACH-V High Power Bridge Wireless Ethernet Radio MACH-V.
The user manual lists all of the functions of the WTI MACH-V High Power Bridge Wireless Ethernet Radio MACH-V,
all the basic and advanced features and tells you how to use the wireless transmission.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from WTI service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the WTI MACH-V High Power Bridge Wireless Ethernet Radio MACH-V. User manuals are also
available on the WTI website under Surveillance - Surveillance Video - Video Transmission - Wireless Transmission.
Question and answer discussion forum concerning user instructions and resolving problems with the WTI MACH-V High Power Bridge Wireless Ethernet Radio MACH-V - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the WTI MACH-V High Power Bridge Wireless Ethernet Radio MACH-V
|
|
|
|
|