|
User manual for Yamaha A-S2000 Natural Sound Stereo Amplifier (Black) A-S2000BL
- Manufacturer: Yamaha
- Basic description and contents of package
- Product classification: TVs & Entertainment - Receivers & Amplifiers - Amplifiers
- Safety instructions
- Startup and operation of the amplifiers
- Tips for setting up your Yamaha
- Settings and expert assistance
- Contact Yamaha service
- Troubleshooting
- Warranty information
Click to enlarge image
|
We recommend checking out our discussion threads on the Yamaha A-S2000 Natural Sound Stereo Amplifier (Black) A-S2000BL,
which address similar problems with connecting and setting up Amplifiers Yamaha.
|
User manual for the Yamaha A-S2000 Natural Sound Stereo Amplifier (Black) A-S2000BL
The user manual for the Yamaha A-S2000 Natural Sound Stereo Amplifier (Black) A-S2000BL provides
necessary instructions for the proper use of the product TVs & Entertainment - Receivers & Amplifiers - Amplifiers.
The black A-S2000 Natural Sound Stereo Amplifier from Yamaha boasts a power output of 90W x 2 (RMS) and uses high quality components and construction to provide fine acoustic performance. The A-S2000 achieves fully balanced signal transmission from input to output. Balanced transmission is capable of canceling internally and external noise, and for this reason, is considered to be an ideal amplification method. The A-S2000 offers full-stage balanced transmission, combining high-power output with excellent sound texture and outstanding S/N performance.
|
If you own a Yamaha amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Yamaha A-S2000 Natural Sound Stereo Amplifier (Black) A-S2000BL in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Yamaha A-S2000 Natural Sound Stereo Amplifier (Black) A-S2000BL:
Maximum Power | 8 ohms, 1 kHz, 10% THD: 120 W + 120 W / 4 ohms, 1 kHz, 10% THD: 190 W + 190 W | RMS Output Power | Minimum: 8 ohms, 20 Hz-20 kHz, 0.02% THD: 90 W + 90 W / 4 ohms, 20 Hz-20 kHz, 0.02% THD: 150 W + 150 W | Dynamic Power per Channel | 8 / 6 / 4 / 2 ohms: 105 / 135 / 190 / 220 W | Damping Factor | 8 ohms, 1 kHz: 160 | Input Sensitivity and Impedance | CD 150 mV / 47 kohms, Phono MM 2.5 mV / 47 kohms, Phono MC 100 μV / 50 ohms, Main in 1 V / 47 kohms | Frequency Response | CD, etc. to speaker out, Flat position 5 Hz-100 kHz +0 dB / -3 dB, CD, etc. to speaker out, Flat position 20 Hz-20 kHz +0 dB / -0.3 dB | Deviation | RIAA Equalization Deviation: Phono MM (20 Hz-20 kHz) ±0.5 dB / Phono MC (20 Hz-20 kHz) ±0.5 dB | THD | 20 Hz-20 kHz: CD balanced to speaker out 0.01% (90 W / 8 ohms), CD, etc. to speaker out 0.015% (90 W / 8 ohms), Phono MM to rec out 0.005% (2 V), Phono MC to rec out 0.05% (2 V) | Signal to Noise Ratio | IHF-A Network: CD, etc., (150 mV, Input Shorted) 98 dB, Phono MM (5 mV, Input Shorted) 93 dB, Phono MC (500 μV, Input Shorted) 85 dB | Residual Noise | CD, etc., IHF-A-Network | Channel Separation | 1 kHz/10 kHz: CD, etc., Input 5.1 kohms Terminaled 74 dB / 54 dB, Phono MM, Input Shorted, Vol: -30 dB 90 dB / 77 dB, Phono MC, Input Shorted, Vol: -30 dB 66 dB / 77 dB | Tone Control | Bass Boost / Cut (at 50 Hz) ±9 dB, Bass Turnover Frequency 350 Hz, Treble Boost / Cut (at 20 Hz) ±9 dB, Treble Turnover Frequency 3.5 kHz | Mute | -20 dB (approx.) | Load Impedance | If you use two sets (A and B), the impedance of each speaker must be 8 ohms or higher | Inputs/Outputs | 5 x RCA audio inputs, including MM (moving magnet) / MC (moving coil) phono input 1 x Set of balanced 3-pin XLR inputs 1 x Preamp out / main in jacks 1 x Headphone jack | Power Requirements | AC 120 V, 60 Hz | Power Consumption | Normal: 350 W Idling: 80 W | Dimensions (W x H x D) | 17.1 x 5.4 x 18.3" (434.3 x 137.2 x 464.8 mm) | Weight | 50 lb (22.7 kg) | Package Weight | 56.5 lb | Box Dimensions (LxWxH) | 22.0 x 21.5 x 9.3" | |
The user manual for the Yamaha A-S2000 Natural Sound Stereo Amplifier (Black) A-S2000BL can be downloaded in .pdf
format if it did not come with your new amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Yamaha users keep a unique electronic library
for Yamaha amplifierss,
where you can use our link to download the user manual for the Yamaha A-S2000 Natural Sound Stereo Amplifier (Black) A-S2000BL.
The user manual lists all of the functions of the Yamaha A-S2000 Natural Sound Stereo Amplifier (Black) A-S2000BL,
all the basic and advanced features and tells you how to use the amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Yamaha service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Yamaha A-S2000 Natural Sound Stereo Amplifier (Black) A-S2000BL. User manuals are also
available on the Yamaha website under TVs & Entertainment - Receivers & Amplifiers - Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Yamaha A-S2000 Natural Sound Stereo Amplifier (Black) A-S2000BL - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Yamaha A-S2000 Natural Sound Stereo Amplifier (Black) A-S2000BL
|
|
|
|
|