PDF-MANUALS.com | User manual here!
User manual

User manual A-Designs VENTURA Solid-State Microphone Preamplifier VENTURA

Operating instructions and pdf manual for use - A-Designs VENTURA Solid-State Microphone Preamplifier VENTURA User manual, User manual A-Designs VENTURA Solid-State Microphone Preamplifier VENTURA, A-Designs, VENTURA, Solid-State, Microphone, Pream


User manual for A-Designs VENTURA Solid-State Microphone Preamplifier VENTURA

A-Designs VENTURA Solid-State Microphone Preamplifier VENTURA
  • Manufacturer: A-Designs
  • Basic description and contents of package
  • Product classification: Pro Audio - Recording - Microphone Preamps
  • Safety instructions
  • Startup and operation of the microphone preamps
  • Tips for setting up your A-Designs
  • Settings and expert assistance
  • Contact A-Designs service
  • Troubleshooting
  • Warranty information
We recommend checking out our discussion threads on the A-Designs VENTURA Solid-State Microphone Preamplifier VENTURA, which address similar problems with connecting and setting up Microphone Preamps A-Designs.



User manual for the A-Designs VENTURA Solid-State Microphone Preamplifier VENTURA

The user manual for the A-Designs VENTURA Solid-State Microphone Preamplifier VENTURA provides necessary instructions for the proper use of the product Pro Audio - Recording - Microphone Preamps.

The VENTURA from A-Designs is a solid-state microphone preamplifier and EQ that captures the sound of the legendary Quad Eight Pacifica console, offering a big, warm tone without being dark, and a sweet, open top end. Designed to be a front end for DAW setups, the VENTURA provides crystal clear and transparent audio with dimensionality, air, and extended bass. Drive the unit a little harder, and it provides a more aggressive sound, while still retaining full bandwidth tonal clarity.

At the heart of the VENTURA lies the specially designed discrete transistor operational amplifier that's powered off of a ±30 VDC rail. The op-amp offers high-gain, fast-slew, and a stable audio block with virtually no DC offset over the audio spectrum. The circuit is capable of driving a 50 ohm load at 50 Hz with extremely low current draw. Additionally, the VENTURA utilizes audiophile-quality components, silver-contact toggle switches, and gold Neutrik XLR connectors.

The mic pre uses Cinemag input and output transformers in a single stage design and features phase reverse, -20 dB pad, +48V phantom power, and a gain control. The preamp simultaneously feeds the EQ section and a dedicated preamp output. The 3-band parametric EQ features 33 frequencies grouped into three bands of overlapping ranges from 50 Hz to 15 kHz, while the dual concentric knobs also offer ±12 dB of boost or cut. Each band also offers a Q switch for fixed positions: Sharp, Wide, Normal. Additionally, the low and high bands are switchable from peak to shelving filters. Another set of switches set the specially tuned 2nd order high and low pass filters that are available independent of the EQ.

The front-panel DI input feeds a dedicated instrument preamp that is separate from the mic pre and is designed to counteract the undesirable effects of guitar/bass pick loading. The instrument preamp also feeds the EQ and preamp output simultaneously. The VENTURA ships with an IEC power cord.
If you own a A-Designs microphone preamps and have a user manual in electronic form, you can upload it to this website using the link on the right side of the screen.

You can upload and download the manual for the A-Designs VENTURA Solid-State Microphone Preamplifier VENTURA in the following formats:
  • *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the A-Designs VENTURA Solid-State Microphone Preamplifier VENTURA:
Specifications
Number of Channels 1
Inputs 1x balanced XLR
1x 1/4" / 6.35 mm direct inject (instrument input)
1x 1/4" / 6.35 mm balanced TRS input for EQ only or FX return
Output Mic/Instrument Output: 1x balanced XLR (+4 level)
Main: 1x balanced XLR (+4 level)
Phantom Power Switchable 48 V
Gain Range Microphone: -62 to +30 dBV
Instrument: 70 dB
Insert / EQ Input: 0 to +26 dBV
Frequency Response Better than 20 Hz to 20 kHz
Noise EIN: -120 dBm
Input Impedance Microphone: 1.4 kOhms (typical)
Instrument: 20 MOhms (nominal)
Insert / EQ Input: 15 kOhms
Output Impedance Balanced XLR Outputs: 600 ohms (nominal)
Phase Reversal Switchable 0 - 180°
Distortion 0.01%
Power 120/230 VAC, 23 W
Dimensions (W x H x D) 19.0 x 1.8 x 10.0" / 48.3 x 4.4 x 25.4 cm
Weight 14.0 lb / 6.4 kg
The user manual for the A-Designs VENTURA Solid-State Microphone Preamplifier VENTURA can be downloaded in .pdf format if it did not come with your new microphone preamps, although the seller is required to supply one. It is also quite common that customers throw out the user manual with the box, or put the CD away somewhere and then can’t find it. That’s why we and other A-Designs users keep a unique electronic library for A-Designs microphone preampss, where you can use our link to download the user manual for the A-Designs VENTURA Solid-State Microphone Preamplifier VENTURA.

The user manual lists all of the functions of the A-Designs VENTURA Solid-State Microphone Preamplifier VENTURA, all the basic and advanced features and tells you how to use the microphone preamps. The manual also provides troubleshooting for common problems. Even greater detail is provided by the service manual, which is not typically shipped with the product, but which can often be downloaded from A-Designs service.

If you want to help expand our database, you can upload a link to this website to download a user manual or service manual, ideally in .pdf format. These pages are created by you – users of the A-Designs VENTURA Solid-State Microphone Preamplifier VENTURA. User manuals are also available on the A-Designs website under Pro Audio - Recording - Microphone Preamps.



Discussion Question and answer discussion forum concerning user instructions and resolving problems with the A-Designs VENTURA Solid-State Microphone Preamplifier VENTURA - no comments have been made yet - be the first to add a comment

Post new comment/question/response regarding the A-Designs VENTURA Solid-State Microphone Preamplifier VENTURA

Fields marked with * must be filled out.
Your name *:
E-mail :
Subject *:
Message text *:
Enter the code *:
(spam block)
"manual"
If you would like to receive a response to your comment, don’t forget to include your e-mail address. Your e-mail will not be displayed or otherwise used in any way.

 

Can't find what you're looking for? Try Google Search!



Current discussions
Most recently discussed products:

Jdjdu - Fujinon ESM-15A-SA Digital Servo Unit for Fujinon ESM-15A-SA
Posted by: Jejd
2024-09-17 15:20:50

Jdjsj...
Blue light won't turn off - Canon PIXMA MG3620 Wireless All-in-One Inkjet Printer 0515C022AA
Posted by: Gail Joyan
2024-09-10 20:06:39

Why is the blue light (wireless symbol)...what is it on...its a blue light. I have had these for years and have never had that light come on and it is not allowing me to print! What do I do to turn it off? ...
K&M manual - K&M 200 Telescoping Microphone Stand (Black) 20000-500-55
Posted by: jpdaval69
2024-09-10 00:50:11

i m lookimg for K&M manual...
SHOT TRAK - ATN Shot Trak HD High Definition Gun Camera with Red SOGCSHTR2
Posted by: DRIFTDIVER
2024-09-03 19:47:06

NEED AN OPERATORS MANUAL...
UA Solo/610 - Universal Audio SOLO/610 Microphone Preamplifier SOLO/610
Posted by: Hani Michel
2024-08-24 20:41:04

I need the service manual/schematic of Universal Audio Solo/610 Serial number: 2310 MfgDt: 0607. I hope you have it and I'm willing to be charged for it. Best Regards....

Uploaded instruction manuals
Upload a link to an instruction manual for a depicted product here:

Link format "http://www.link2manual.com/manual.pdf"

Enter the code: "manual"






PDF-MANUALS.com - Community administered database of instructions for use and PDF User manual
sitemap.txt alx