|
User manual for ACTi I48 2MP Day/Night Vandal-Resistant Bullet Camera I48
- Manufacturer: ACTi
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Wired IP Cameras
- Safety instructions
- Startup and operation of the wired ip cameras
- Tips for setting up your ACTi
- Settings and expert assistance
- Contact ACTi service
- Troubleshooting
- Warranty information
Click to enlarge image
|
We recommend checking out our discussion threads on the ACTi I48 2MP Day/Night Vandal-Resistant Bullet Camera I48,
which address similar problems with connecting and setting up Wired IP Cameras ACTi.
|
User manual for the ACTi I48 2MP Day/Night Vandal-Resistant Bullet Camera I48
The user manual for the ACTi I48 2MP Day/Night Vandal-Resistant Bullet Camera I48 provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Wired IP Cameras.
The ACTi I48 2MP Day/Night Bullet Camera features a 1/2.8" progressive scan CMOS sensor to capture images at resolutions up to 1920 x 1080 at 30 fps. With Extreme WDR (145 dB), Superior Low Light Sensitivity (SLLS), and 27 adaptive IR LEDs, this camera is suitable for use in day/night conditions. The adaptive IR LEDs allow for automatic adjustment of IR illumination when the camera zooms into an area to narrow down the beam angle and extend the range to cover the zoom-in area. While zooming out, the adaptive IR LED technology will readjust the illumination back to cover the wider area. It also features a mechanical IR-cut filter.
|
If you own a ACTi wired ip cameras and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the ACTi I48 2MP Day/Night Vandal-Resistant Bullet Camera I48 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the ACTi I48 2MP Day/Night Vandal-Resistant Bullet Camera I48:
| Type | Bullet camera | | Sensor | 1/2.8" progressive scan 2 MP CMOS | | Effective Pixels (H x V) | 1944 x 1224 | | Total Pixels | 2.38 MP | | TV Lines | 1800 | | Day/Night | Yes | | Low Light Sensitivity | Superior Low Light Sensitivity (SLLS) | | Minimum Illumination | Color: 0.1 lux at f/1.6 (30 IRE, 2400 K)
B/W: 0 lux (IR LED On) | | Color to B/W Switch | ISP based switch, configurable | | Mechanical IR Cut Filter | Yes | | IR Sensitivity Range | 700 to 1100 nm | | IR LED | 27 x Adaptive IR LEDs, 850 nm (object & zoom adaptive) | | IR Working Distance | 131' (40 m) (0 lux, 30 IRE, Gain 255, Auto shutter mode) | | Electronic Shutter | 1/5 to 1/2,000 sec (manual mode)
1/5 to 1/10,000 sec (auto mode) | | S/N Ratio | 56 dB | | Type | Zoom lens | | Focal Length | 4.5 to 148.5 mm | | Aperture | f/1.6 to f/5.0 | | Zoom Ratio | 33x optical | | Zoom Speed | 2.87 sec (Wide to Tele) | | Iris | DC iris | | Focus | Auto focus | | Mount Type | Board mount | | Image Orientation | Rotation (0°, 90°) | | Horizontal Viewing Angle | 2.07° to 61.7° (Wide to Tele) | | Compression | H.264 HP, MJPEG | | Maximum Frame Rate | 60 fps at 1920 x 1080
60 fps at 1280 x 720
30 fps at 640 x 480
30 fps at 320 x 240 | | Streaming | Multi-streaming, simultaneous dual streams based on two configurations | | Bit Rate | 28 kb/s to 6 Mb/s (per stream) | | Bit Rate Mode | Constant, variable | | Image Enhancement | Extreme WDR (145 dB); White balance (automatic, hold, and manual); Brightness; Contrast; Sharpness (auto); Auto gain control; 2D+3D digital noise reduction; Flickerless; Defogging; Digital image stabilizer | | Text Overlay | User defined text on video | | Privacy Masking | 20 configurable regions | | Streaming | Triple streams | | Compression | 8 kHz, mono, PCM, 16-bit encoding, G.711 | | Audio In/Out | Terminal block | | Protocol | TCP, UDP, HTTP, HTTPs, DHCP, PPPoE, RTP, RTSP, IPv4, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour, Sony VISCA, Pelco-D, Pelco-P | | Ports | 1 x Ethernet (10/100 Base-T), RJ-45 connector | | Security | IP address filtering; HTTPs encryption; password protected user levels; anonymous login; IEEE802.1X network access control | | Alarm Trigger | Video motion detection (10 regions); external device through digital input | | Response | Notify control center; Change camera settings; Command other devices; E-mail notification with snapshots; Save video or snapshot to local storage; Upload video or snapshot to FTP server; Activate external device through digital output | | Digital In/Out | 1 x Terminal block | | Local Storage | microSDHC memory card slot (card not included) | | Unified Solution | Fully compatible with ACTi software | | ISV Integration | Software Development Kit (SDK) available; ONVIF compliant | | Firmware Access Browser | Microsoft Internet Explorer 8.0 or newer (full functionality)
Safari with QuickTime installed and other browsers with VLC installed (partial functionality) | | Approvals | CE (EN 55022 Class B, EN 55024), FCC (Part15 Subpart B Class B), IP67, NEMA 4X, IK10 (metal casing) | | Weather / Vandal Resistance | Weatherproof (IP67, NEMA 4X); IK10-rated metal casing | | Power Source | PoE Class 3 (IEEE802.3af) and 12 VDC | | Power Consumption | 7.68 W (heater, fan, and IR On) | | Mounting | Wall, pole, ceiling, gang box | | Storage Temperature | -40 to 122°F (-40 to 50°C) within 30 minutes | | Operating Temperature | -40 to 122°F (-40 to 50°C) | | Operating Humidity | 10 to 85% RH | | Dimensions | 4.8 x 4.0 x 9.5" (122.4 x 101.37 x 240.4 mm) | | Weight | 5.4 lb (0.25 kg) | |
The user manual for the ACTi I48 2MP Day/Night Vandal-Resistant Bullet Camera I48 can be downloaded in .pdf
format if it did not come with your new wired ip cameras, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other ACTi users keep a unique electronic library
for ACTi wired ip camerass,
where you can use our link to download the user manual for the ACTi I48 2MP Day/Night Vandal-Resistant Bullet Camera I48.
The user manual lists all of the functions of the ACTi I48 2MP Day/Night Vandal-Resistant Bullet Camera I48,
all the basic and advanced features and tells you how to use the wired ip cameras.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from ACTi service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the ACTi I48 2MP Day/Night Vandal-Resistant Bullet Camera I48. User manuals are also
available on the ACTi website under Surveillance - Surveillance Video - Wired IP Cameras.
Question and answer discussion forum concerning user instructions and resolving problems with the ACTi I48 2MP Day/Night Vandal-Resistant Bullet Camera I48 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the ACTi I48 2MP Day/Night Vandal-Resistant Bullet Camera I48
|
|
|
|
|
